Toyota Corolla crankcase protection
Toyota Corolla crankcase protection
If the standard Toyota Corolla engine crankcase protection does not cope with its task, buy one of our models. Alta Karter offers branded equipment recommended by the manufacturers of your car.
You can order engine crankcase protection for Toyota Corolla at the best prices in Moscow online. And if you... read more
If the standard Toyota Corolla engine crankcase protection does not cope with its task, buy one of our models. Alta Karter offers branded equipment recommended by the manufacturers of your car.
You can order engine crankcase protection for Toyota Corolla at the best prices in Moscow online. And if you come to us, we will install it.
You can get recommendations on choosing a car accessory and sign up for its installation by calling +7 (495) 215-02-45 or 8 (800) 555-02-76.
page: 1 of 3<\p>
Sorting:
1 900P
In stock: 117
| vendor code | 111.05722.3 |
| Brand: | |
| Manufacturer: | Rival |
| A country: | Russia |
| Material | Steel |
| Thickness | 2 mm |
| What protects | Engine crankcase, gearbox |
| Engine | V – 1.4; 1.6 |
| Equipment | Protection, packaging, fastening, instructions. |
| Fastening | Included |
| Sheets | 1 |
| Size | 821x821x92 mm |
| Weight | 11.5 kg |
| Car model year from | 2002 |
| Car model year up to | 2006 |
2 050P
In stock: 66
| vendor code | 111.05773.1 |
| Brand: | |
| Manufacturer: | Rival |
| A country: | Russia |
| Material | Steel |
| Thickness | 2 mm |
| What protects | Engine crankcase, gearbox |
| Engine | V – 1.6; 1.8 |
| Equipment | Protection, packaging, fastening, instructions. |
| Fastening | Included |
| Body | E160 |
| Sheets | 1 |
| Size | 755x755x40 mm |
| Weight | 10 kg |
| Car model year from | 2013 |
| Car model year up to | 2018 |
1 750P
In stock: 72
| vendor code | 111.05799.1 |
| Brand: | |
| Manufacturer: | Rival |
| A country: | Russia |
| Material | Steel |
| Thickness | 2 mm |
| What protects | Engine crankcase, gearbox |
| Engine | 2013-2016 (1,6; 1,8), 2016- (1,6) |
| Equipment | Protection, packaging, fastening, instructions. |
| Fastening | Included |
| Body | E160 |
| Sheets | 1 |
| Size | 631x631x42 mm |
| Weight | 7.3 kg |
| Car model year from | 2013 |
| Car model year up to | 2018 |
1 900P
In stock: 117
| vendor code | 111.05722.3 |
| Brand: | |
| Manufacturer: | Rival |
| A country: | Russia |
| Material | Steel |
| Thickness | 2 mm |
| What protects | Engine crankcase, gearbox |
| Engine | V – 1.5; 1.8 |
| Equipment | Protection, packaging, fastening, instructions. |
| Fastening | Included |
| Sheets | 1 |
| Size | 821x821x92 mm |
| Weight | 11.5 kg |
| Car model year from | 2002 |
| Car model year up to | 2006 |
2 150P
In stock: 3
| vendor code | 6124 |
| Brand: | |
| Manufacturer: | AutoSHIELD |
| A country: | Russia |
| Material | Steel |
| Thickness | 2 mm |
| What protects | Engine crankcase, gearbox |
| Engine | 1.3 l |
| Body | All |
| Gearbox type | All |
| Weight | 7,8 |
| Car model year from | 2007 |
| Car model year up to | 2013 |
1 550P
In stock: 2
| vendor code | 09.763.C2 |
| Brand: | TriABC |
| Manufacturer: | TriABC |
| A country: | Russia |
| Material | Steel |
| Thickness | 1.8 mm |
| What protects | Engine crankcase, gearbox |
| Engine | All |
| Body | E140 |
| Sheets | 1 |
| Other | There is no hatch to drain the oil. |
| Car model year from | 2007 |
| Car model year up to | 2013 |
1 700P
In stock: 4
| vendor code | NLZ.48.29.020 NEW |
| Brand: | |
| Manufacturer: | Novline |
| A country: | Russia |
| Material | Steel |
| Thickness | 2 mm |
| What protects | Crankcase |
| Engine | V – 1.33; 1.6; 1.8 |
| Sheets | 1 |
| Gearbox type | Manual/automatic transmission |
| Car model year from | 2013 |
| Car model year up to | 2016 |
2 050P
In stock: 12
| vendor code | 111.5773.1 |
| Brand: | |
| Manufacturer: | Rival |
| A country: | Russia |
| Material | Steel |
| Thickness | 2 mm |
| What protects | Engine crankcase, gearbox |
| Engine | V – 1.6; 1.8 |
| Fastening | Included |
| Sheets | 1 |
| Size | 755x995x40 mm |
| Weight | 10 kg |
| Car model year from | 2013 |
| Car model year up to | 2018 |
4 550P
In stock: 23
| vendor code | 333.5773.1 |
| Brand: | |
| Manufacturer: | Rival |
| A country: | Russia |
| Material | Aluminum |
| Thickness | 4 mm |
| What protects | Carter, checkpoint |
| Engine | (13-16)1.6; 1.8/(16-)1.6 |
| Fastening | Included |
| Sheets | 1 |
| Size | 755x995x995 mm |
| Gearbox type | All |
| Weight | 6 kg |
| Car model year from | 2013 |
| Car model year up to | 2018 |
5 950P
In stock: 5
| vendor code | ALF.24.06 AL 4 |
| Brand: | |
| Manufacturer: | ALFeco |
| A country: | Russia |
| Material | Aluminum |
| Thickness | 4 mm |
| What protects | Engine crankcase, manual transmission |
| Engine | All |
| Body | E120 |
| Sheets | 1 |
| Car model year from | 2002 |
| Car model year up to | 2007 |
2 250P
In stock: 6
| vendor code | ALF.24.22 |
| Brand: | |
| Manufacturer: | ALFeco |
| A country: | Russia |
| Material | Steel |
| Thickness | 2 mm |
| What protects | Engine crankcase, gearbox |
| Engine | All |
| Body | E110 |
| Sheets | 1 |
| Car model year from | 1997 |
| Car model year up to | 2002 |
4 550P
In stock: 23
| vendor code | 333.5773.1 |
| Brand: | |
| Manufacturer: | Rival |
| A country: | Russia |
| Material | Aluminum |
| Thickness | 4 mm |
| What protects | Carter, checkpoint |
| Engine | V – 1.6; 1.8 |
| Fastening | Included |
| Sheets | 1 |
| Size | 755x995x995 mm |
| Gearbox type | All |
| Weight | 6 kg |
| Car model year from | 2007 |
| Car model year up to | 2013 |
2,000P
In stock: 11
| vendor code | 02537 |
| Brand: | |
| Manufacturer: | Trio-Service |
| A country: | Russia |
| Material | Steel |
| Thickness | 2 mm |
| What protects | Engine crankcase, gearbox |
| Engine | All |
| Body | E150 |
| Sheets | 1 |
| Other | With hole for oil drain and filter. |
| Car model year from | 2007 |
| Car model year up to | 2013 |
2 250P
In stock: 1
| vendor code | 6116 |
| Brand: | |
| Manufacturer: | AutoSHIELD |
| A country: | Russia |
| Material | Steel |
| Thickness | 2 mm |
| What protects | Engine crankcase, gearbox |
| Engine | All |
| Body | All |
| Gearbox type | All |
| Weight | 8,1 |
| Car model year from | 2007 |
| Car model year up to | 2013 |
1 550P
In stock: 5
| vendor code | ALF.24.01 st |
| Brand: | |
| Manufacturer: | ALFeco |
| A country: | Russia |
| Material | Steel |
| Thickness | 2 mm |
| What protects | Engine crankcase, gearbox |
| Engine | V – 1.6 |
| Sheets | 1 |
| Other | Stamped protection |
| Car model year from | 2007 |
| Car model year up to | 2013 |
1 600P
In stock: 12
| vendor code | 111.5799.1 |
| Brand: | |
| Manufacturer: | Rival |
| A country: | Russia |
| Material | Steel |
| Thickness | 2 mm |
| What protects | Engine crankcase, gearbox |
| Engine | V – 1.6; 1.8 |
| Set | Protection + fastening |
| Fastening | Included |
| Sheets | 1 |
| Size | 631x815x42 mm |
| Weight | 8.1 kg |
| Car model year from | 2006 |
| Car model year up to | 2013 |
4 400P
In stock: 3
| vendor code | ZZZ.5799.1 |
| Brand: | |
| Manufacturer: | Rival |
| A country: | Russia |
| Material | Galvanized steel |
| Thickness | 2 mm |
| What protects | Engine crankcase, gearbox |
| Engine | V – 1.6 |
| Fastening | Included |
| Sheets | 1 |
| Gearbox type | All |
| Car model year from | 2013 |
| Car model year up to | 2018 |
2 050P
In stock: 8
| vendor code | 62501 |
| Brand: | |
| Manufacturer: | Trio-Service |
| A country: | Russia |
| Material | Steel |
| Thickness | 2 mm |
| What protects | Engine; gearbox |
| Engine | 1.6 petrol |
| Sheets | 1 |
| Size | 667×892 mm |
| Gearbox type | Variable speed drive |
| Other | Drive: front |
| Weight | 7,5 |
| Car model year from | 2013 |
| Car model year up to | 2018 |
1 750P
In stock: 2
| vendor code | ECO.48.31.020 |
| Brand: | |
| Manufacturer: | Autofamily (Autoparts Logistics) |
| A country: | Russia |
| Material | Steel |
| Thickness | 2 mm |
| What protects | Crankcase |
| Engine | V – 1.33; 1.6; 1.8 |
| Sheets | 1 |
| Gearbox type | Manual/automatic transmission |
| Car model year from | 2013 |
| Car model year up to | 2018 |
2 500P
In stock: 6
| vendor code | 6114 |
| Brand: | |
| Manufacturer: | AutoSHIELD |
| A country: | Russia |
| Material | Steel |
| Thickness | 2 mm |
| What protects | Engine crankcase, gearbox |
| Engine | All |
| Body | All |
| Gearbox type | All |
| Weight | 9,3 |
| Car model year from | 2001 |
| Car model year up to | 2007 |
2 250P
In stock: 8
| vendor code | ALF.24.06 st |
| Brand: | |
| Manufacturer: | ALFeco |
| A country: | Russia |
| Material | Steel |
| Thickness | 2 mm |
| What protects | Engine crankcase, gearbox |
| Engine | All |
| Body | E120 |
| Sheets | 1 |
| Other | Stamped steel |
| Car model year from | 2002 |
| Car model year up to | 2007 |
shown: 1 to 25 of 70
Source: http://Alta-Karter.ru/zashita-kartera/toyota/corolla
Steel engine and gearbox protection - logbook of the 1998 Toyota Corolla AE110 SE Salon L on DRIVE2
I thought for a long time about this question, to be or not to be... And I decided that it would be to protect the engine and gearbox! After looking at some options (there are only 3 for this car), I became familiar with the fastening element of each protection and, looking at the price, decided to take protection from MOTODOR.
Car without protection
Car with protection
Looking ahead, I will say that this protection is installed on our cars bolt-to-bolt . ——————————————————————————————— —————-
Catalog number 02510 , price = 2390 rub. (on the official website).
In fact, I purchased this protection on the Autodoc.ru website - where its price for me is = 1894 rubles. This includes delivery!
price = 2390 rub. (on the official website).
on the Autodoc.ru website - price = 1894 rubles. including delivery
Product description: 2 mm thick steel engine and gearbox protection for Toyota Corolla from 1997 to 2000.
Protected units: engine; gearbox (gearbox);
The crankcase protection has: a hole for draining the crankcase oil; — not relevant for my model!
hole for draining crankcase oil - not relevant for my model
Ordered and upon arrival we have the following:
Steel engine and gearbox protection
Mounting kit
Fastening kit: 2 pcs. — Corner A30 M102 pcs. — PU 60x14x6 A20 B10 M81 pcs. — Cork 2 pcs. — Bolt DIN 933 – 8.8 08×0302 pcs. — Grover washer DIN 127 M082 pcs. — Washer body. DIN 9021 M 08 *200*4 pcs. — Bolt DIN 933 – 8.8 10×0304 pcs. — Grover washer DIN 127 M104 pcs. — Washer body. DIN 9021 M 10 *200*
1 PC. — Washer body. DIN 9021 M 14
Before installing the protection, my car looked like this.
Car without protection
Installation procedure on the car:
1. Attach the A30 M10 Angles to the towing eyes with M10x30 Bolts with Washers and Gr. 10 washers, 45 washers.
We attach Angles A30 M10 to the towing eyes with Bolts M10x30 with Washers and Gr. Washers 10, Washers 45. (1)
We attach Angles A30 M10 to the towing eyes with Bolts M10x30 with Washers and Gr. Washers 10, Washers 45. (2)
2.1. Fix PU 60x14x6 A20B10 M8 into the holes in the front suspension subframe.
PU 60x14x6 A20B10 M8
PU 60x14x6 A20V10 M8 - installed
2.2. Secure the rear protection points with M8x30 bolts with washers and Gr. Washers 8.
Rear protection points secured
Note!
a) We do not throw away the factory protection, because it protects the motor elements on the sides (photo 14).
We don’t throw away factory protection
b) Between the metal protection and the towing element of the vehicle, I recommend placing a bushing (cushion, piece of rubber, etc.) to prevent contact between the protection and the towing loop (photo 15). Because while driving you will hear a knock and a hum.
https://www.youtube.com/watch?v=ivs6nMmGaH8
Place a bushing between the metal protection and the towing element
3. We secure the rear points of protection. We secure the front points of protection.
We secure the rear protection points
We secure the front protection points
That's all.
Positive aspects 1. — today (03/07/2014) I had to go down from a low curb, and when I went down, I heard the grinding of the protection, my heart was in the right place :) Also, today, when parking, the front end of the protection drove onto the sidewalk curb, it turned out to be not in accordance with GOST (like many) and I heard a characteristic sound.
There is still a negative side the protection is closed, the noise from the engine no longer goes onto the road, but remains under the soot space.
Good luck to everyone on the roads!
A special THANK YOU for OVER and “like”!
ps Thank you very much to my father for his help and provision of a technical pit at his enterprise.
Issue price: 1,900 ₽ Mileage: 247,800 km
Source: https://www.drive2.ru/l/3101747/
Protection of crankcase, gearbox and other things on Toyota Corolla sedan XI (Toyota Corolla sedan) 2012-present
Russian roads are known to everyone for their abundance of potholes, pits, ledges and other irregularities. For safe driving, it is recommended to protect your vehicle as much as possible. One of the main elements is the protection of the crankcase, that is, the bottom of the engine, gearbox, etc. If the crankcase is damaged, the car will not be suitable for further use.
The crankcase protection for Toyota Corolla sedan XI is a metal plate that is designed to be secured under the bottom of the engine. It is designed taking into account the location of the main protected parts of the engine.
Most often, different car models use their own protection model, since they may not have the same location of mounting holes and other structural elements. In our online store you can order protection for the engine crankcase, gearbox, transfer case and other elements for the Toyota Corolla sedan XI at an affordable price.
No matter what city in the Russian Federation you are in, you can order goods from us! We cooperate with large transport companies that will quickly and at a reasonable price deliver crankcase protection for Toyota Corolla sedan XI (Toyota Corolla sedan) 2012-present.
You just place an order on the website, and our employees do the rest of the processing.
Owners of off-road vehicles and those who like to drive outdoors should pay special attention to crankcase protection. Country or field roads are full of surprises, and it is very easy to damage unprotected elements.
The Toyota Corolla sedan XI crankcase protection is easy to use, it is not difficult to install even on your own if you have the opportunity to drive the car onto an overpass. An important advantage is that this protection does not reduce the vehicle's ground clearance.
After installation, it is not the lowest place on the bottom of the car.
When buying a new car, it may not have protection at all, or it may have plastic protection installed - it is most often suitable for protection only from dirt. And when buying such a car, it is best to immediately install new metal protection for the engine crankcase, gearbox, transfer case, radiator, gas tank and other things on the Toyota Corolla sedan XI 2012-present.
Do you like to go on vacation in your car? Then the offer to purchase a roof rack, bike racks, car boxes, and a tow bar for your car will be relevant to you.
We stock equipment only from proven global brands, characterized by high reliability and quality. Please also pay attention to the huge selection of car mats needed to protect the car upholstery from dirt and moisture.
By purchasing from us, you are making the right choice!
Source: https://autovigor.ru/catalog/zashchita-kartera/toyota/corolla-sedan_2012/
Toyota Corolla Forum
Recorders, GPS, chargers and so on
DyushaHonored Korollovod Messages: 11430 Registered: March 30, 2013, 01:53 pm Car: Corolla, 2011, 4 automatic transmission, 1.6 l petrol diesel, Comfort+, drank more than 9700 l/Ai92, Toebta 0W20 Location: 133, Kovrov Thanks : 7 times Thanked: 24 times
#2
Post by Dyusha » Jan 16, 2014, 10:23 pm
What difference does it make which engine? The protection is not attached to the engine, but to the subframe (rear) and the TV (front). I have this one http://www.exist.ru/price.aspx?sr=113&c … de=RSA6116, I’m not complaining.
DyushaHonored Korollovod Messages: 11430 Registered: March 30, 2013, 01:53 pm Car: Corolla, 2011, 4 automatic transmission, 1.6 l petrol diesel, Comfort+, drank more than 9700 l/Ai92, Toebta 0W20 Location: 133, Kovrov Thanks : 7 times Thanked: 24 times
#3
Post by Dyusha » Jan 16, 2014, 10:31 pm
I bought this protection for the E150 AutoShield RSA6116. I didn’t want to give 5 tre offs. It’s enough that I bought a car from them, let them be happy, but don’t let them take the money from me. The package contained a box with two brackets, two screws with washers and grommet washers. For work you will need: 1. Head 17 with short extension;2. 10mm head with short extension;3.
Slotted screwdriver;4. Stationery scissors;5. Graphite lubricant. First of all, remove the plastic apron, unscrew 6 screws with a 10-point head, use a screwdriver to remove the nails in the 8 pcs pistons and take out the pistons themselves. After this, carefully remove the apron. The longer bracket that is inserted into the cross beam on the left has the necessary holes.
We try it on the left side and
insert it, screw in the bolt, pre-lubricated with graphite, with a groover and a washer from below and screw it 5-6 turns. We do the same on the right side. We unscrew the standard bolts on the 17 transverse and longitudinal beams (shown in circles) from left to right. We install the protection itself.
We insert the protection fastenings into the front screws, moving it back, there are specially made cutouts in the fastenings. Then, having previously lubricated the original bolts with graphite, we screw the protection behind the rear fastenings into the standard places. We stretch everything with the head to 17 and rejoice at our happiness. The protection did not eat up at all from the ground clearance, no protruding elements were added.
The only bad thing is that the casing in the bumper wings was left without additional fastening. I did this.
I cut out two strips like this from the apron, inserted them into the side members from the inside and secured them with a standard piston from left to right aleks 69 Honorary Korollovod Messages: 5379 Registered: February 19, 2013, 20:01 Car: Corolla Elegance 2012 1G3 Reistal automatic transmission, oil XenumX1 5w30 Location: Moscow Thanks to: 3 times Thanked: 16 times
#4
Post by aleks 69 » Jan 19, 2014, 4:06 pm
I took it for 1500 rubles I installed it for 10 minutes, I didn’t remove anything from my family, I didn’t remove the fastening at four points, there is a hole for draining the oil, and gills for cooling the automatic transmission, the piece of hardware is painted with steam paint. The manufacturer is the auxiliary gearbox, I’m taking it for a second car, no complaints.
Do you want your car to run? Do it yourself. Nobody needs it in a car service for 100 years. They need your money!
DyushaHonored Korollovod Messages: 11430 Registered: March 30, 2013, 01:53 pm Car: Corolla, 2011, 4 automatic transmission, 1.6 l petrol diesel, Comfort+, drank more than 9700 l/Ai92, Toebta 0W20 Location: 133, Kovrov Thanks : 7 times Thanked: 24 times
#5
Post by Dyusha » January 19, 2014, 21:01
This? Something is turning out to be a bit expensive.aleks 69Honored Korollovod Messages: 5379 Registered: 19 Feb 2013, 20:01 Car: Corolla Elegance 2012 1G3 Reistal automatic transmission, oil XenumX1 5w30 Location: Moscow Thanked: 3 times Thanked: 16 times
#6
Post by aleks 69 » Jan 20, 2014, 09:30
No,!!
here is the link and photo! I didn’t look for the price on the site! Right now they have a 30% discount, mine is brown as in the photo for now, then rusty red, but the functionality does not change http://www.dzk.ru/casing_protections.mhtml?PubID =34
Do you want your car to run? Do it yourself. Nobody needs it in a car service for 100 years. They need your money!
Vovan 306
#7
Post by Vovan 306 » Jan 30, 2014, 07:56
When I bought a car from a dealer, I installed protection (3500 for the protection itself + 600 rubles for installation). 5000 rubles for the protection itself is clearly too much.
Here in Krasnodar you can buy it from 2500 rubles on the market. and through the online store from 2000 rubles
Vovan 306
FVLHonorary King Leader Messages: 818 Registered: Jan 21, 2013, 11:21 am Car: Corolla E-180. 1.6. 2013 Manual Location: 31 Thanked: 5 times Thanked: 12 times
#8
Post by FVL » Jan 31, 2014, 02:47 pm
Last fall I bought it for 1300 rubles.
You do not have the necessary permissions to view the attachments in this message.
BegemotHonorary member of the club Messages: 966 Registered: January 15, 2013, 14:23 Car: Corolla 150 MMT with transformation into Hyndai ix35 Location: Krasnodar Thanked: 1 time
#10
Post by Begemot » 25 Feb 2014, 18:04
BegemotHonorary member of the club Messages: 966 Registered: January 15, 2013, 14:23 Car: Corolla 150 MMT with transformation into Hyndai ix35 Location: Krasnodar Thanked: 1 time
#12
Post by Begemot » 26 Feb 2014, 15:02
Maybe there are holes in different places for the oil drain? Or under a filter? ON-Vladislav Honorary Korollovod Messages: 382 Registered: 08 Jan 2013, 01:43 Car: Corolla 2007, 1.4l, manual transmission Location: Azov RO Thanked: 2 times Thanked: 1 time
#14
Post by ON-Vladislav » 03 Mar 2014, 11:25
Kandalf, you can unscrew it, but you’ll have to work hard... There are 2 bolts, they not only secure the protection, but also hold the stabilizer bushings in place. So they are clamped tightly. In my opinion, it is easier to find protection with a suitable hole for draining the oil.
DyushaHonored Korollovod Messages: 11430 Registered: March 30, 2013, 01:53 pm Car: Corolla, 2011, 4 automatic transmission, 1.6 l petrol diesel, Comfort+, drank more than 9700 l/Ai92, Toebta 0W20 Location: 133, Kovrov Thanks : 7 times Thanked: 24 times
#16
Post by Dyusha » March 03, 2014, 13:10
I don’t feel any sweat, I unscrew the rear subframe bolts completely and loosen the front ones a few turns, everything goes off with a bang. The stub bushing bolts are much further away (see report above).
xellag Messages: 16 Registered: 30 Dec 2013, 14:50 Car: Toyota corolla 150 2012 1.6 manual transmission
#18
Posted by xellag » 08 Apr 2014, 17:56
Hi all.
Tell me if there is such protection for the E150 1.6, so that when changing the oil and oil filter you don’t have to remove the protection. Thank you.
FVLHonorary King Leader Messages: 818 Registered: Jan 21, 2013, 11:21 am Car: Corolla E-180. 1.6. 2013 Manual Location: 31 Thanked: 5 times Thanked: 12 times
#19
Post by FVL » 08 Apr 2014, 18:22
Almost everyone has holes for this.aleks 69Honored Korollovod Messages: 5379 Registered: 19 Feb 2013, 20:01 Car: Corolla Elegance 2012 1G3 Reistal automatic transmission, oil XenumX1 5w30 Location: Moscow Thanked: 3 times Thanked: 16 times
#20
Post by aleks 69 » Apr 08, 2014, 06:29 pm
See my post...
Do you want your car to run? Do it yourself. Nobody needs it in a car service for 100 years. They need your money!
Go
Source: http://tc-club.ru/viewtopic.php?t=1356
Loading...
