Window deflectors
In extreme heat, not even the best air conditioner can replace an open window for the driver. A fresh stream of air from the window will make the trip less tiring and more comfortable. But what if the road is dusty or lightly raining? Side window ventilation deflectors help solve these problems.
What are deflectors?
The deflector is a small curved plastic visor over the window. It promotes good heat exchange and air circulation in the cabin. Gives a stylish and finished look to the car's design.
That is why car deflectors are colloquially called spoilers or car wind deflectors. They allow you to open the window at high speed without fear of something flying into the window and reliably protect against drafts. Wind deflectors are multifunctional:
- they prevent windows from fogging up
- protect glass from streaks
- protects eyes from blinding bright light.
Passengers of smoking drivers will also appreciate deflectors on car doors.
What are they made of?
Window visors must withstand strong dynamic and mechanical loads. The impact of a small stone from under the wheels of a car in front should not break it or move it from its place. Side window deflectors are made from thermoformed plastic or acrylic glass.
This is a fairly durable material that is resistant to mechanical damage. Deflectors made from it are thin and very rigid, durable, smooth plates. The shape of the deflector follows the shape of the roof contours and door arches.
For 5-door cars, a 5-door deflector is provided.
Types of deflectors
You can buy two types of side window deflectors.
- Adhesive deflectors are easy to install. However, for durable attachment, a high-quality adhesive composition of double-sided tape is required. Typically, 3M tape is used for such purposes, which can withstand the highest loads.
- Plug-in deflectors are installed further under the seal. They are characterized by long service life. However, it can be noted that they often affect the operation of the window regulators, which, when raising the glass, rest against the deflector. Therefore, when choosing a deflector, you need to pay attention to this nuance. Window deflectors and mud flaps on trucks and minibuses are attached with steel clips.
Colors and characteristics
Side window deflectors differ in color and degree of tinting. You can choose window deflectors to match the color of the car, or vice versa, a contrasting or eye-catching color.
You can buy windshields in light smoky and dark smoky colors. Chrome window deflectors will give your car a stylish and luxurious look. Model sizes vary depending on the car model.
They can be:
- standard (7-8 cm)
- extended (10 cm)
- tapered (3-4 cm)
And, of course, you can always buy inexpensive windshields just for the front doors.
Models of deflectors with chrome molding
Some car owners want to buy window deflectors to complement the already created image of the car. In order not to cover the chrome running along the top of the door with deflectors, and not to break the circular chrome design of the moldings, you can choose deflectors with a chrome edging - molding.
Such models are installed on top of the original molding and do not violate the style of car tuning in any way. Any types of deflectors can be installed without damaging the structural elements of the machine. If you want to leave the original chrome moldings exposed, you can choose a deflector that fits inside the window opening.
This model will provide a neat and strict appearance of the car. The catalog of deflectors is very large.
Aerodynamics
Side deflectors are a fashionable and functional accessory. They significantly improve the car's aerodynamics by directing air along a curved edge. At the same time, the driver will not experience inconvenience due to aerodynamic noise, since the windshield minimizes its manifestations.
How to install deflectors on car windows with your own hands?
How to attach a deflector to a car?
- Plug-in . Installing plug-in deflectors takes no more than 5 minutes. They are inserted under the door frame into the spacer, into the groove into which the glass fits. On the front doors, the products are held in place due to their geometric shape. Models with rear doors are taped around the perimeter with 2-sided tape, so you need to open the window and slightly bend the deflector to the shape of the door with your hands and insert it. There is no need to rush when working; it is not difficult to break the deflector when installing it yourself. Removing this type of deflector will not be difficult.
- Overhead. When purchasing an adhesive deflector, you need to pay attention to the quality of the adhesive tape. The original 3M tape should be gray in color and should not delaminate. The spoiler should follow the shape of the arch. If bending force is required when gluing, the deflector will quickly come off during operation. For high-quality gluing, you first need:
- Installation is carried out in a warm room
- Degrease the gluing area with an alcohol wipe
- Tear off the protective film from the tape not completely, but 5 cm from each edge
- Carefully glue the edges of the deflectors to the door
- Assess the evenness of the gluing - you can still re-glue it in the first minute before the adhesive tape sets
- Pull the tendrils of the protective film of the tape and remove it
- Press firmly on the edges and hold for a while.
- After installation, do not wash or touch the visors for several hours.
Care
Properly installed deflectors guarantee many years of service. They do not require any special care. Deflectors that break during operation can be quickly replaced without damaging the vehicle.
Five reasons why you need to install deflectors on windows
- Installed deflectors on the side windows prevent direct flow of oncoming air from entering while driving when the window is opened suddenly or unexpectedly
- Side window deflectors will protect those sitting in the car from splashes and drops during rain .
- In a car with wind deflectors installed on the windows, an area of low pressure is created inside. Thanks to this, the air in the car will always be fresh and clean.
- Side deflectors protect passengers from the bright rays of the sun , as they are made of translucent tinted plastic
- For active and passive smokers, side window deflectors are simply vital: by improving air circulation, smoke and ash fly outside the car and keep the car interior clean.
Still have questions?
Source: https://www.BestParts.ru/catalog/cat9.html
Window deflectors
Functional and decorative car accessory – window deflector. Otherwise they are called wind deflectors. Installed on a car, they solve the following problems: provide ventilation of the car in bad weather, prevent rain from entering the car interior, and prevent insects from entering the interior. Deflectors provide high-quality interior ventilation at any time of the year.
By covering the edges of car windows, deflectors protect them from chips and scratches. They do not interfere with opening and closing windows. In addition, they make small window openings invisible, which is invaluable in the hot season. They provide safe ventilation of the interior.
Another function that side window deflectors perform is to prevent dirt from the windshield from flying to the corners of the side windows. This problem is common when it's muddy and rainy outside, in the spring and fall. When driving, water and dirt fly onto the side windows, obstructing your view and impairing visibility in the side mirrors.
It is impossible to constantly wipe these places - you need to stop and get out of the car. At night, this reduces road safety. Deflectors distribute the air flow and this problem becomes irrelevant.
Side window deflectors are installed without damaging the vehicle. There is no need to drill the body; they are attached to it using double-sided tape. Installation is carried out independently in a few minutes. Before installation, it is recommended to wash the machines, degrease the deflector gluing surface with alcohol and carefully glue the product.
For maximum fixation, it must be pressed tightly. That's it, the car is equipped with a useful accessory. It will not peel off from moisture, strong wind, or high speed. Caring for the deflector involves washing it with the car and wiping it with a damp cloth.
A modern car window deflector is famous for its attractive appearance. It does not spoil the exterior of the car, but complements it and gives it a solid look. The deflectors are made of dark, shiny plastic; they do not change their appearance over time and do not crack in cold weather.
To prevent deflectors from making noise and whistling when the car is moving at high speed, you need to carefully select them. Check the quality of the product, select models to match your car model, trust only trusted manufacturers.
Our online store offers you to buy deflectors for windows. We have collected a wide range of deflectors to make it easier for customers to choose. Select accessories by car make and model or with the help of store consultants.
The kit includes as many deflectors as there are windows in the car, that is, if the car has two windows, then there will be two deflectors, if there are four windows, then there will be four. The catalog contains a description of the sets and quantity of deflectors for a particular car, their color and other parameters are indicated. The store’s consultants will help you understand the nuances and arrange delivery to the desired city.
Window deflectors are an inexpensive accessory that provides plenty of benefits. Don't give it up; appreciate its advantages and stylish design.
Source: http://automania-shop.ru/catalog/deflektory_okon/
Deflectors
The online store Avtoset.net presents all products for car tuning, including side window deflectors.
What types of car deflectors are there?
- Deflectors for car windows. These are linings that protect the vehicle interior from splashes of rain and dirt and prevent moisture from penetrating into the vehicle through the glass. In addition to being protective, side window deflectors perform a decorative function, favorably emphasizing the appearance of your car among other cars.
The accessories are made of ABS plastic and are attached to the door frames with double-sided tape.
- Protection for headlights that prevents contamination and damage to headlight glasses and is installed on top of them.
Small transparent covers made of acrylic glass extend the life of lighting devices and protect them from clouding. The Autoset online store offers accessories in carbon, silver-black and colorless shades.
- Deflectors for the hood.
Linings that follow the shape of the hood and are installed in the holes provided for this purpose protect the car from damage from flying small stones and hard clods of dirt.
Why us?
Avtoset.net is everything for tuning, including deflectors from the world's best manufacturers on the website and in showrooms in Moscow, St. Petersburg and other major Russian cities.
We offer:
- affordable prices;
- the ability to choose a payment method;
- delivery anywhere in the country;
- possibility of self-pickup.
Side deflectors for a car
Side window deflectors (wind deflectors) are designed to protect the car interior from the penetration of moisture from the outside; they, to some extent, protect the windows from contamination. The streamlined shape of the side window visors allows you to lower the windows and ventilate the interior in inclement weather. The material for the manufacture of deflectors is thin but very durable thermoplastic.
Types of side deflectors and installation rules
Each brand of car has its own wind deflector models. Deflectors are available in two types: overhead and plug-in. Their installation does not take much time and the owner of the car can do it himself. Wind deflectors, installed correctly, will not fall off on the second day and will serve the car owner for a long time.
How to install plug-in side window deflectors
This type of deflector is mounted under the door frame between rubber and glass. For more reliable fixation, these windshields have glued surfaces. However, if the manufacturer does not meet all the necessary technical parameters, sometimes the thickness of the edge of the deflectors does not coincide with the grooves - then after a while the wind deflectors will fall out of the mounting points.
Plug-in side deflectors on the car should be inserted into the provided grooves first, without removing the protective film.
If the windshields fit tightly, then you don’t have to worry about the strength of the fastening, but if they fall out, use double-sided tape.
Place the deflector between the rubber and glass slowly, carefully, gradually increasing the effort. When done correctly, the deflectors fit tightly into place and hold securely.
Features of installing overhead side windshields
Overhead deflectors are much easier to install. The thickness of the accessory does not play a role here, since the windshields are glued directly to the edge of the door. It is important that the shape of the deflector matches the geometry of the door: we offer you to buy visors for car windows designed specifically for the model on which they will be attached on our website Avtoset.net.
The operating algorithm is as follows:
- thoroughly degrease the edge of the door with an alcohol wipe or cloth moistened with alcohol;
- bend the protective film of the adhesive base of the deflector 1 cm from the edge;
- attach the windshield to the edge of the door, pressing it with the adhesive edges;
- After making sure that the deflector is installed correctly, remove the remaining protective film and glue it completely;
- do the same work with the rear door deflector, making sure that it is located in line with the installed front deflector;
- To improve the result, heat the edge of the adhesive base with a hairdryer and press with a rubber roller.
If you doubt your capabilities, the Autoset company provides an additional service - high-quality and fast installation of the purchased device on your car. For questions and consultation, contact us by phone numbers listed on the website.
Installing deflectors on windows and hood - detailed instructions and video
Source: https://www.AvtoSet.net/catalog/deflektory.html
How to choose and install side window deflectors in your car
As you know, any object on the car body affects its aerodynamics, the way air flows around the car.
The operating principle of the side window deflector is precisely based on changing the air flow while the car is moving at high speed so that raindrops, road dust or snow do not fly into the cabin when the windows are slightly open.
This is facilitated by the special shape of the windshields, somewhat similar to a small visor. Wind deflectors for the front windows also have a reflective inclined wall, which differs from the design for the rear windows.
If there are no side window deflectors on the car, then opening the window at high speed leads to a large draft in the cabin. As a result, road dust, soot, precipitation, and insects penetrate into the interior.
Wind deflectors, usually made of dark special plastic, also provide some protection from the sun's rays, protecting the upholstery from fading. For smoking drivers, windshields are a real godsend. They allow the interior to be well ventilated while the car is moving in any weather, eliminating unpleasant odors and smoke.
Installation Features
To install side window deflectors yourself, you do not need any special knowledge or special tools. Just follow the instructions included in the instructions. The windshields are attached above the side glass to the metal frame of the window. Based on the mounting method, a distinction is made between plug-in and glued-on deflectors.
Installing the first type of deflectors is very simple. They are inserted into the gap between the glass and the rubber seal in the window frame. To do this, just slightly bend the elastic plastic with both hands in the middle and insert it into the gap at the top of the window, and then firmly seat it in place. Here you should pay attention to the following points.
The plastic should fit tightly enough and not loosen. Otherwise, when driving at high speed with the window open, it may be torn from its place.
To make sure that the windshield fits tightly into place, you can first install it without removing the protective film from the adhesive surface. This measure will allow you to remove the deflector without any problems.
The protective film is removed and the device is installed again if everything is satisfactory.
Otherwise, some car enthusiasts advise additionally sticking double-sided tape. Care must be taken in this process to ensure that there is enough room for the glass to close freely. Otherwise, there will be additional load on the window regulators, which will accelerate their wear.
Adhesive devices do not have the disadvantages described above, and their installation takes only a few minutes. But, if they are poorly glued and do not hold firmly enough, they can be torn off by a stream of air and damage the paintwork. Let's consider gluing technology.
First you need to decide on the exact installation location. You can install it immediately on the edge of the frame above the glass, from the top edge of the frame or in its middle. Experts recommend the latter option.
Then the surface of the frame (glass edging) must be degreased using alcohol and a lint-free rag. Some manufacturers include a special degreasing wipe for these purposes.
After this, you need to remove the protective film from the adhesive surface a couple of centimeters from the ends of the windshield and install the device in the desired place. This measure will allow you to glue it first only along the edges, which will make it possible to accurately align it along its entire length. Once you are sure that everything is aligned as required, you can remove the protective film from the entire deflector by pulling on the end.
Video “Installing deflectors from EGR”
How to choose the right deflector
The first thing you should pay attention to is that the shape of the purchased device matches the shape of the surface of the window frame (edging). If you purchase a glued version, it must fit snugly to the window frame along its entire length. If you decide to go with the plug-in version, you need to ensure the tightness of installation in the seats.
The second thing that should not be overlooked is the quality of the plastic. It must be strong enough. You should not chase cheap products. Cheap plastic cannot be of high quality.
The third point that will help you make the right choice is the appearance of the product or, in other words, the quality of workmanship. Good manufacturers guarantee the quality of their product and do not skimp on additional conveniences for their customers, for example, detailed installation instructions or a grease-cleaning cloth.
Although these attachments are just an optional accessory, they should be chosen carefully. Then you will get pleasure and comfort from using them.
Video “Chrome deflectors with overlay. Installation"
Few people know about such a useful thing as deflectors for car windows. From this video you will learn how to install them and give them a more expensive and respectable look.
Source: http://MineAvto.ru/tyuning/eksterer/deflektory-bokovyh-stekol-4130.html
Deflectors
You are at:
On the page
Page:
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Sort type |
According to their mounting system, side window deflectors can be:
- “plug-in” - in this case, the deflector is installed in the gap between the glass and the door seal.
- “overhead” - in this case, the deflectors are installed from the outside of the door using a special 3M adhesive tape, which is already installed on the inside of the deflectors.
Our company recommends the installation of the second option for side window deflectors, namely “overhead”, because in the case of “plug-in” ones, there is a high probability of failure of the door window servo drives.
A separate type of deflectors, which have recently been particularly popular among buyers, are side window deflectors with a chrome molding in their upper part.
This type of windshield is recommended for installation on cars that already have, as standard equipment, or installed separately, glass edging (glass door moldings).
In this case, the side window deflectors with chrome molding are in perfect harmony and complement the standard equipment of the car.
In our online store you can buy high quality side window deflectors for your car from well-established global manufacturers.
Side window deflectors, or more simply put “wind deflectors”, are a practical and most importantly useful element of the external tuning of a car.
We list the 3 main functions that side window deflectors perform:
- protection of the upper part of the doors from possible minor damage, dirt and insects while the car is moving;
- protect the car interior from rain, snow, etc., if it is necessary to open the window slightly;
- give the appearance of the car a more sophisticated and modern look.
Side window deflectors are made from high-quality polymers by stamping or casting.
Much attention is paid to the design of side window deflectors for a modern car. This tuning element should not look “foreign” on the car body, but effectively complement and emphasize its appearance. The geometry of the windshields is developed in strict accordance with the car door, which eliminates problems with their installation.
You can purchase side window deflectors and consult on any questions you are interested in by calling the multi-line sales department or using the feedback form.
Source: https://city-tuning.ru/catalog-tip/deflektory.html
Window deflectors
Sort by:BackForward
Product code: 380878 Deflector AUDI A1 Sportback (5 doors HECCHBACK) (from 2011) door windows 4 pcs Article: Door deflector Manufacturer HEKO | 1 400.00 |
Availability: MKAD OSTSH LESK | INTERNET |
Product code: 380879 Deflector AUDI A3 Sportback (8VA) (5 doors HECCHBACK) (from 2012) door windows 4 pcs Article: Door deflector Manufacturer HEKO | 1 400.00 |
Availability: MKAD OSTSH LESK | INTERNET |
Product code: 380881 Deflector AUDI A4 (8K2, B8) (4 doors SEDAN) (from 2007) door windows 4 pcs Article: Door deflector Manufacturer HEKO | 1 800.00 |
Availability: MKAD OSTSH LESK | INTERNET |
Product code: 479002 AUDI A6 (C7) (from 2011) door window deflector 4 pcs Article: Door deflector Manufacturer SIM | 1 800.00 |
Availability: MKAD OSTSH LESK | INTERNET |
Product code: 380883 Deflector AUDI Q5 (8RB) (5 doors) (from 2011) door windows 4 pcs Article: Door deflector Manufacturer HEKO | 1 950.00 |
Availability: MKAD OSTSH LESK | INTERNET |
Product code: 473433Deflector AUDI Q7 4D from 2015 door windows 4pcs Article: SAUDQ71532 Manufacturer SIM | 2 250.00 |
Availability: MKAD OSTSH LESK | INTERNET |
Product code: 240468 BMW X5 E70 door window deflector 4 pcs. 07- 3MArticle: D27039 | 400.00 |
Availability: MKAD OSTSH LESK | INTERNET |
Product code: 449347 BMW X6 E71 2008 deflector - door windows 4 pcs Article: SBMWX60832 Manufacturer SIM | 1 900.00 |
Availability: MKAD OSTSH LESK | INTERNET |
Product code: 065843 Deflector CHEVROLET AVEO HB since 2004. door windows 2 pcs. PolandArticle: 10503 | 200.00 |
Availability: MKAD OSTSH LESK | INTERNET |
Product code: 420276 Deflector CHEVROLET AVEO SED 2006-2010 door windows 4pcs CORSAR Article: DEF00391 Manufacturer AZARD | 1 050.00 |
Availability: MKAD OSTSH LESK | INTERNET |
Product code: 303252 Deflector CHEVROLET Aveo2, RAVON Nexia (4 doors SEDAN) (since 2007) door windows 4 pcs Article: Door deflector Manufacturer HEKO | 1 300.00 |
Availability: MKAD OSTSH LESK | INTERNET |
Product code: 339813 Deflector CHEVROLET Aveo3 (4 doors SEDAN) (from 2011) door windows 4 pcs Article: Door deflector Manufacturer HEKO | 1 300.00 |
Availability: MKAD OSTSH LESK | INTERNET |
Back forward
Source: http://www.xn--80aaasbafk1acftx0c6n.xn--p1ai/deflektory-okon
Side window deflectors - an accessory for a comfortable ride
Any motorist knows how inconvenient ventilation can be during crosswinds, rain or other unpleasant weather conditions. Wind deflectors, or as they are also called, side window deflectors, are an excellent solution to the problem. Let's figure out what it is and how to choose windshields for a car.
The principle of operation of the deflector
Installing the hood and window deflector
Let's start with the fact that translated from English “deflector” is a cut-off device.
That is, car window deflectors are designed to cut off air flows that bring dust and microparticles of moisture into the car interior.
Their main task is to ensure a certain aerodynamics of the body, in which foreign particles of pollution do not enter the interior of the car.
The deflector is located in the upper part of the side opening and represents a kind of visor. Due to the fact that it has a specially shaped front reflective wall, the windshield not only prevents the penetration of pollution from its upper side, but also from its front part, from where dust and dirt usually enter the car interior.
Another effect that the driver and passengers often pay attention to is that the presence of a deflector ensures uniform ventilation of the cabin and prevents the emergence of strong air currents. Of course, this is a side effect and not the main one, but often it is fundamental when choosing a particular deflector model.
Glass deflectors - installation features
Installing the side window deflector
As a rule, windshields are attached to the upper part of the window frame. There are two types of fastening - adhesive-based and conventional, by mechanical connection. Sticking a windshield is a thankless task, since there is a high probability of damage to the paintwork.
If car window deflectors do not correspond to the geometry of the window opening (which is often the case with cheap non-original manufacturers), then their installation is fraught with some dangers. For example, when there is a lot of wind or driving at high speed, the windshield can tear off part of the paintwork, causing damage to the body and having to fork out for additional work.
Therefore, the most convenient option from an installation point of view is plug-in window deflectors.
To install them, you do not need to use adhesive connections, which can harm the paintwork; such deflectors are attached exclusively using a mechanical connection.
The only exception is cars in which the side windows in the upper part are adjacent directly to the body - there it is simply impossible to install windshields. A striking example of this is the Subaru Forester of the late 2000s.
How to choose the right plug-in side window deflectors?
The first thing you should consider when choosing deflectors is geometry. If the bend angle does not match the body bend angle, you can forget about durability.
Such a windshield is not difficult to install, but the plastic will be constantly under tension and the slightest mechanical impact can cause damage.
Most often, this is the case with universal windshields or those that are selected manually. Fitting a mold never bodes well.
Another factor in selecting a deflector is the shape of its working part. Even if the seat completely follows the curve of the body, the angle of deflection of the deflector plane can cause additional resistance while driving, especially at high speed.
The result is a loose fit of the seals, their peeling off from the body, damage to the paintwork or damage to the deflector itself. Therefore, it is important to pay attention to the correct choice of such an accessory.
In short, all the characteristics that need to be considered when choosing a deflector can be ranked as follows, in order of decreasing importance:
- Compliance with original geometry.
- Mounting type.
- Workmanship.
- Wing geometry.
- Quality of material.
The answer to the question - what is a car deflector - is simple - it is an additional accessory. But do not forget that the presence of such an accessory aims to ensure a comfortable ride, and not to make your car unique or allow you to stand out from the crowd.
Therefore, it is better to purchase a wind deflector from a trusted service, where they can install it and at least somehow guarantee the quality of installation, than to select a deflector from an online store whose photo you like more than others, but in operation it will turn out to be impractical and unreliable.
Source: http://CarTore.ru/3378-deflektory-na-bokovye-stekla-avtomobilja.html