Which jack is best for a passenger car?

6 Best Car Jacks

A reference point in the car jack market

To deny the need for a jack is to deny the obvious. No one is immune from wheel damage on the road; Such devices are no less useful for garage repairs. However, the wide selection of different car jacks on the market can drive novice motorists into a stupor, especially their female counterparts. So, which jack should you choose?

Types of car jacks

The simplest and most familiar type of jack is a screw jack, in which rotating the screw in one direction or another increases the angle of rotation of the “foot” (on lever-screw models) or shifts the supporting profiles (on rhombic jacks).

These car jacks are the cheapest, and they are what cars are equipped with from the factory.

Let us note right away that in the rating we will not consider lever-screw jacks, and we strongly do not recommend purchasing them - they are unstable and without proper insurance they are simply dangerous for the car owner.

Rhombic jacks are much safer in this regard - the load on the supporting platform is directed strictly along the center of the contact patch with the ground, as a result of which the car can stand securely on such a jack.

However, they retain other disadvantages of screw jacks - slow movement, rapid wear of the screw-nut pair, limited load capacity.

A diamond jack will be the best choice for the owner of a car weighing up to 1.5 tons, who needs a jack solely as an emergency option for replacing the spare tire.

Another type of mechanical jack is the rack and pinion jack , also known as the hijack. The load capacity and huge (by the standards of other jacks) stroke made them an integral attribute of vehicles prepared for off-road use - in any other case, a large and heavy mechanism has no practical meaning.

If you prefer to maintain your car yourself, then a hydraulic jack will be the best choice. Bottle jacks have a limited vertical stroke and are primarily convenient for owners of cars with significant ground clearance - their height with the rod retracted remains decent.

But by welding a simple steel frame, a bottle jack can always be used as a hydraulic press.

Rolling jacks, although significantly more expensive, are not only the most convenient for owners of city cars, but are also indispensable for repairs: for example, with their help it is easy to hang up an engine or gearbox if it is necessary to remove one of the supports.

Pneumatic jacks are the least common Such a jack is essentially a pneumatic spring that lifts the car when inflated.

Their main advantage is the minimum space taken up when folded and the absence of the need to apply physical force: just connect the compressor.

However, their sensitivity to damage and tendency to play under load make them not the best choice.

This jack is one of the most affordable and widespread in car dealerships, but its popularity is based not only on this: the model turned out to be the most universal, allowing you to crawl under even cars with 95 mm (!) ground clearance, for which every lifting of the car becomes a quest for engineering ingenuity . The maximum lift height is 400 mm, which is more than enough to remove a wheel on most cars, including crossovers. The load capacity declared by the manufacturer is 2 tons, so the owners of the vast majority of city cars are left with a solid margin of safety. Let's continue with the good news: despite the budget price, the manufacturer did not skimp on installing a rubber cushion on the jack support, ensuring that owners did not damage the paintwork on the jacking areas threshold amplifiers. Alas, even more expensive jacks often sport a simple iron platform with a groove for the amplifier rib, which quickly scratches the paint. Ease of storage has not been forgotten: by removing the handle, the car jack can be put away in the bag that comes with it. Main advantages:

Low height when folded.
Good margin of safety and stability.

Minuses:

The rubber cushion is not secured firmly enough - if it gets pressed under the edge of the threshold amplifier, it may begin to peel off at the edges.

9.5 / 10 Rating Reviews It’s difficult to judge the service life - I only use a jack when changing a set of wheels. But in three years it hasn’t let me down, it stands stable, and the rest of the time it doesn’t take up much space in the trunk.

In general, this jack is not much different from the Airline product, but still loses to it in terms of total points. Firstly, the declared load capacity is only 1.5 tons, which hints at either lower quality materials or the manufacturer’s desire to play it safe. Secondly, the stroke of the diamond has been reduced: if at a height of 95 mm when folded, the Airline can rise to 400 mm, then the 100 mm Autoprofi can only rise to 390. It would seem like a small thing - but these millimeters are often not enough to lift you off the ground wheel or get under the threshold of a flat tire. This jack also lost in terms of ease of storage: the manufacturer refused to add a bag to the package. However, one cannot help but notice that a higher quality rubberized platform is used here, which partially equalizes the chances of purchasing both jacks. Main advantages:

Affordable price and widespread in stores.
Rubberized heel.

Minuses:

Not the most durable screw, prone to rapid wear under high loads.

9.0 / 10RatingReviews The jack is purely for passenger cars. Somehow, out of necessity, they had to lift a heavy machine on a pile of stands - the experiment was unsuccessful, there was little safety margin...

Let’s clarify right away: if the ground clearance of your car is less than 200 mm, this jack will not suit you. But owners of crossovers and SUVs will appreciate how easily this jack will lift their car - after all, the calculated maximum load of 8 tons is sufficient even for a loaded Gazelle. It is also not bad as a working cylinder for a homemade press. The maximum lifting height of this jack is 400 mm. In operation, the DG-08 performs well, although it belongs to the budget class: high-quality processing of the hydraulic cylinder eliminates premature wear of the cuffs, and the safety valve prevents them from being squeezed out when overloaded. You can only find fault with the metal heel - in order not to damage the paint or anti-corrosion coating, you will have to select linings. Main advantages:

Affordable price.
Good carrying capacity.

Minuses:

Inconvenient descent (however, this is typical for most similar jacks).

9.0 / 10 Rating Reviews “Raises any traveling truck of category “C” with a bang, such as the Gazelle, and does not leak oil in the heat, which is a problem with many cheap jacks.

The ability to lift a load of up to 12 tons has become both a plus and a minus of this jack: on the one hand, it lifts even heavy cars easily, on the other hand, you have to do too much pumping for this: the laws of hydraulics are inexorable. The lifting height here is also not the smallest: with a ground clearance of less than 230 mm, the use of this jack is impossible. The maximum lifting height is 465 mm. The jack is most convenient for heavy work, it’s not for nothing that it comes with an extension for the lever. The same lever is used to lower the car down, placing its flattened side on the flats of the fluid bleed screw. Of course, given the low price of the jack, this solution can be called a tribute to cost reduction, but this does not add practicality: the flattened tube will flare over time and begin to grip the screw head worse. Main advantages:

High load capacity.
Enviable mechanical strength.

Minuses:

Heavy weight.
Not the best choice of pressure relief design.

8.7 / 10 Rating Reviews The best choice for the UAZ driver is an inexpensive and easy to lift the car jack, which is also a powerful press.

The HobbyLine 3.520 jack has not let down the reputation of the Sorokin brand of garage tools, well-known among auto mechanics - this compact rolling jack with a lifting capacity of 2 tons will become a convenient and practical tool for car repair and maintenance. The lifting height of 125 mm allows this jack to be used when repairing most passenger cars with the exception of extremely low ones. The maximum platform lift is 300 mm. The tubular handle is easily removable and has an ergonomic shape, with a handle for easy carrying. The jack itself is not that heavy for its class: 6.5 kg. Unfortunately, the jack does not have a rubber thrust pad: the manufacturer offers to buy it separately, which looks somewhat strange considering that the jack needs it in any case. Considering that the original Sorokin thrust bearing costs only 99 rubles, the price of a jack with it would increase slightly. Main advantages:

Compact dimensions with good load capacity.
Low roll height.
Rigid lever design.

Minuses:

Relatively low lifting height.
No thrust bearing included.

9.7 / 10Rating Reviews An inexpensive and space-saving car jack from a reputable brand is perhaps the best description.

Its mechanical strength and affordable price have made this hijack a favorite among off-road enthusiasts. With a lifting capacity of 3 tons, it is capable of raising the emphasis to a height of up to 700 mm: even for a solidly lifted all-terrain vehicle, this is a decent height, but if this is not enough, there are jack models with a lift of up to 110 cm. The stepper mechanism used here is quite reliable and unpretentious to cleanliness (which is especially important given the operating conditions of such auto jacks), and a long lever with a comfortable handle makes lifting the car easier. The presence of an upper hook allows you not only to lift a car with this jack, but also to use it as a powerful winch, although the solid weight (more than 10 kg) does not add convenience to this application. Main advantages:

Affordable price.
Simplicity and “indestructibility”.

Minuses:

Typical weight and length for rack and pinion jacks.

9.8 / 10 Rating Reviews Getting out into the dirt without a hijack is for beginners or those who like to run behind a tractor. “Zubr” is the best auto jack, it more than pays for its price.

As you can already understand, of all the geometric parameters of a jack when choosing, the two most important are: pick-up height and maximum lifting height .

The first value must be at least 30 mm less than the height of the car jacks (otherwise, if the wheel goes flat, you simply will not be able to place the jack under the car), the second value must exceed the same height by at least 100 mm in order to confidently lift the wheels off the ground when full rise.

There is no point in chasing a reserve load capacity if the jack lives in the trunk 99% of the time: it will already last for many years with such use, and a more powerful one will simply turn out to be more expensive and heavier.

Source: http://www.expertcen.ru/article/ratings/luchshie-avtomobilnie-domkrati.html

Top 10 best car jacks based on user reviews

Not all motorists have a garage, and even one with a special pit inside. In most cases, they have to lift their car to change tires and other similar tasks. This process is carried out using a jack.

Because of its simple design, many companies began to produce such a tool. This significantly complicates the choice of jack, because there are a large number of low-quality models. In this selection we will try to consider all the jacks that are worth the money spent on them.

All you have to do is find out if the jack you like is available in the nearest store.

Which brand of car jack should I choose?

AE&T

The AE&T brand may seem to be based somewhere in North America. But in fact, the production of equipment under this brand is carried out by one of the Russian companies specializing in the creation of automobile accessories.

The Automotive Equipment & Tools brand was founded in 2005. Since then, the manufacturer has significantly expanded its dealer network, and therefore you can find AE&T jacks in almost any region of Russia.

And it’s impossible to find fault with the quality of this company’s products - usually buyers are satisfied with everything.

AIRLINE

The AIRLINE brand produces a huge number of all kinds of products intended for motorists. In particular, these are luggage systems, tool sets and, of course, car jacks. The latter can have a carrying capacity from a modest one to a truly gigantic 16 tons. All products are painted in the signature orange color.

Forsage

This brand mainly produces hydraulic jacks, the body of which is painted in blue-gray colors. These products are manufactured in China, but this does not affect their quality in any way. Most products serve customers well for many years, but what more could you ask for from such a tool?

MATRIX

The MATRIX brand is well known to builders and mechanics. Under it, hundreds of thousands of all kinds of tools are produced annually - screwdrivers, drills, chisels, pliers and much more. The company's assortment also includes jacks. Some of the models created by this manufacturer come complete with a case, making it easy to transport.

BISON

The Russian company Zubr OVK produces a variety of tools, which both professionals and ordinary residents of the country choose in favor of.

The company is also engaged in the creation of technically complex devices - air compressors, welding equipment and mini-washes.

Approximately in the middle are ZUBR car jacks - they are quite simple, but at the same time reliable, thanks to which buyers are not afraid to trust them with their precious vehicle.

Rating of the best car jacks

This rating, based on user reviews, takes into account:

Ease of use;
Complaints about breakdowns;
Price;
Availability in Russian retail;
Lifting height;
Load capacity.

The best screw jacks

Enkor 1 t 28580

As the name of this jack clearly shows, its lifting capacity does not exceed one ton. It turns out that this product should appeal to owners of domestic vehicles who regularly change tires themselves.

Advantages:

Simple design;
High reliability;
The lifting height reaches 350 mm;
Weighs only 2.4 kg;
Minimum dimensions;
Low cost.

Flaws:

Load capacity is only 1 ton.

Reviews for Enkor 1 t 28580 show that the jack turned out to be of high quality and reliable. It reliably copes with placing a car on two wheels so that its owner can change the tires. At the same time, the instrument is easy to transport, as it takes up little space and weighs only 2400 grams.

Inforce T10202

The brand from the online store “All Tools” continues to expand its range. From now on, it includes some very good jacks, one of which is the Inforce T10202. This is a diamond-shaped screw jack that can lift up to two tons of load.

Advantages:

Load capacity reaches 2 tons;
The lifting height is 395 mm;
Small size and weight;
Relatively low price;
Reliable design.

Flaws:

Despite its decent lifting capacity, this jack weighs only 3.5 kg. All its structural elements are significantly reinforced, so you don’t have to worry about the reliability of your purchase. Reviews of the Inforce T10202 show that the jack is difficult to damage, even on purpose. However, we would not recommend subjecting it to maximum load.

The best rack and pinion jacks

Skyway S01803002

This model looks very impressive. One gets the impression that with its help you can lift absolutely any weight. My only regret is that the price is too high - for that kind of money you can buy three screw jacks at once!

Advantages:

Load capacity reaches 3.5 tons;
The lifting height is 680 mm;
Reliable and convenient design.

Flaws:

High price;
Difficult to transport.

Reviews on Skyway S01803002 indicate that people use it to lift not only their cars, but also their garages! If we forget about the cost, then the only drawback of this jack is its 8.5-kilogram weight. This, together with its rather large size, does not allow you to carry Skyway S01803002 with you - you will definitely want to free up the trunk for more useful cargo.

Wiederkraft WDK-80603

This jack may seem very simple from the outside. But in fact, it can easily handle lifting loads weighing up to three tons! The main advantage of this model is its lifting height, which reaches one and a half meters.

Advantages:

The lifting height is 1550 mm;
Load capacity reaches 3 tons;
Quite high reliability.

Flaws:

The latch is a vulnerable spot;
High price;
Large dimensions and weight.

Reviews of the Wiederkraft WDK-80603 show that this tool helps raise the vehicle to any desired height.

However, you will have to come to terms with the 15-kilogram mass of the unit and its one and a half meter length. Among the reviews you can also find a mention of burst metal on the latch.

Apparently, the Wiederkraft WDK-80603 should not be used frequently to lift the full three-ton weight limit.

The best electric jacks

Varta V-CJ2.10

This model is capable of raising the car body to a height of up to 400 mm. At the same time, it does not require any labor from a person, since the jack runs on electricity. A wired remote control, additionally equipped with backlight, is used for control.

Advantages:

Does not require effort from a person;
Availability of a wired remote control;
The lifting height reaches 400 mm;
The remote control is backlit;
Load capacity is 2 tons;
Power supply from the vehicle's on-board network;
Possibility of replacing fuses.

Flaws:

Lack of distribution in stores.

Reviews of the Varta V-CJ2.10 show that people like the unit they are purchasing. This is a rare case when the jack is supplied in a suitcase, thanks to which it stands out in the trunk against the background of all the rubbish that may be present there. It is also impossible not to note the existing remote control, which is backlit - this makes it easier to work in the dark somewhere on a country road.

The best inflatable jacks

SOROKIN 3.693

The main advantage of any inflatable jack is that it can lift even a vehicle with minimal ground clearance.

Also, such a tool does not require any serious effort - it is inflated using exhaust gases. It is interesting that SOROKIN 3.

693 is equipped with a splitter, which allows it to be used even in a car with two exhaust pipes.

Advantages:

Availability of a rubber mat and bag;
Possibility of using a splitter;
Does not require significant human intervention;
The lifting height is 640 mm;
The pick-up height is only 50 mm;
Load capacity reaches 3 tons;
Weight does not exceed 1.9 kg.

Flaws:

High price;
The rubber mat is not of the best quality.

Reviews of SOROKIN 3.693 indicate that this is a fairly good product. If you forget about the high price tag and bad carpet, then the jack has no serious drawbacks. However, it is only suitable for passenger cars. At maximum load, the lift height decreases, which is why the wheels of the SUV may never leave the ground.

The best pneumatic jacks

Trommelberg C107707

This jack is pneumatic. It is equipped with an inflation valve and an overload valve. It is highly reliable. The jack can easily withstand air pressure up to 9 bar.

Advantages:

Lifting height is 437 mm;
Load capacity reaches 2 tons;
Very high reliability;
Ease of use;
Minimum dimensions and weight.

Flaws:

Incredibly high cost.

Reviews of the Trommelberg C107707 show that it is one of the most reliable inflatable jacks. It can be used repeatedly and daily; damage to it can only be caused intentionally. The buyer should also be pleased with the decent load capacity, equal to two tons.

The best rolling jacks

Santool 110103-002

It is not for nothing that rolling jacks are the most popular. They are easy to use and take up little space. Most often, such products are equipped with a case, which makes transportation even easier. All this can be said about Santool 110103-002. This model is ideal for use in conjunction with a passenger car.

Advantages:

Hydraulic type;
Load capacity reaches 2 tons;
Low cost;
Availability of a suitcase;
High reliability.

Flaws:

Lifting height - only 300 mm;
It is not recommended to use without a threshold stand.

Reviews of Santool 110103-002 indicate that this is one of the simplest, but quite well-functioning rolling jacks. The tool stably lifts almost any passenger car, and the hydraulics make the user’s actions as easy as possible. The jack weighs no more than 6.5 kg together with the case.

Skyway S01802001

Perhaps this jack does not look too menacing. But it does its job relatively easily - with its help you can lift up to 1.8 tons of cargo. The main advantage of this specimen is its light weight. And having a suitcase makes transportation even easier.

Advantages:

Availability of a case;
Load capacity is 1.8 tons;
Relatively low cost;
Hydraulic type;
Small size and weight.

Flaws:

Lifting height is only 300 mm.

Reviews for Skyway S01802001 show that this jack copes with its task with ease. It can be used to lift passenger cars with a ground clearance of at least 125 mm. And the case and minimal weight allow you to throw the jack in the trunk so that you always have it with you.

AIRLINE AJ-3F-500

This is one of the most powerful rolling jacks. He is capable of lifting up to three tons of weight! In this case, special efforts from the owner are not required. Only the weight of the jack can confuse you - you definitely won’t carry such a copy with you.

Advantages:

High reliability;
Load capacity is 3 tons;
The lifting height reaches 500 mm;
Hydraulic type;
High lifting speed.

Flaws:

The weight of the entire package is 32.5 kg;
High price.

Reviews of the AIRLINE AJ-3F-500 indicate that this is the best jack for tire mounting. With its help, the car rises almost instantly, no matter how heavy it is. At the same time, the lifting height here reaches an impressive 500 mm!

Which car jack to buy

The most important parameter of any jack is its load capacity. Ordinary car enthusiasts have enough of a mechanism that can lift up to two tons.

If a person owns an SUV, then he will have to look for a vehicle with a carrying capacity of at least three tons. Typically, rolling jacks have this parameter. Well, hook jacks can lift even more weight.

But such a mechanism itself weighs a lot, and therefore it will not be possible to take it with you on the road.

The hardest part is for truck drivers. They need to consider not only the weight of their vehicle, but also the curb weight. So it turns out that lifting a truck sometimes requires a massive product, the carrying capacity of which reaches 14-15 tons!

In some cases, it is worth thinking about the maximum lift height. If you assume that you may need to replace a wheel in off-road conditions, then look for a model that can lift the car by 80-100 cm. Typically, rack and pinion jacks have this parameter. In other cases, a mechanism with a lifting height of 30-50 cm will be sufficient.

Another important parameter is the pick-up height. Some specimens themselves are too high, which is why they simply do not fit under the car. That's why before choosing a jack, you need to find out what ground clearance your car has.

Toe jacks have the lowest lifting height. Screw jacks, also called rhombic or diamond-shaped, can also be placed under almost any passenger car.

They are not suitable only for use in conjunction with sports cars, the ground clearance of which tends to a minimum value.

Source: https://vyboroved.ru/avtomoto/532-top-10-luchshikh-avtomobilnykh-domkratov-po-otzyvam-polzovatelej.html

5 best car jacks – rating 2017

Not every car owner turns to a service station when they need to repair their “iron friend”.

Moreover, on the road, a tire may unexpectedly go flat and have to be changed, so it is important to always have free access to the bottom of the car. The best car jacks of various types proposed in our rating can provide this.

They will allow you to raise the car to the desired height without any problems and lock it in that position.

Want to create a site? Find Free WordPress Themes and plugins.

The best car jacks - which company to buy

All companies included in our rating have an extensive distribution network throughout the CIS, so you can buy their products in every major auto store. Products are also sold on the manufacturers’ website, but mostly only in bulk.

It definitely wouldn’t be a mistake to choose these companies:

Autoprofi - the manufacturer offers all the products necessary for motorists, from auto chemicals to jacks. The products are manufactured in Russia, so their prices are quite reasonable.
Matrix – its range includes rack and pinion, roll-on, bottle models with a load capacity from 2 to 20 tons. Both car enthusiasts and service station owners will find a suitable option here.
Kraft - the company began producing goods for car owners back in 1993. During this time, she replenished her piggy bank with tool sets, lighting equipment, spare parts and various accessories for cars. The company balances on the brink of a budget company and the mid-price segment.
Airline is a fairly well-known Russian manufacturer of automotive products. His line of jacks is quite decent, it includes more than 50 modifications. But the company’s priority is the development of bottle hydraulic models with large tonnage (from 2 to 50 tons).
Sorokin - this manufacturer closes the top five, but it took last place only because of the high price of its products. It is mainly used by service station owners. According to this indicator, the company is inferior to its competitors, but is ahead of them due to the presence in its assortment of rather rare electro-hydraulic models.

Rating of the best car jacks

As always, user reviews and expert recommendations were a good help in compiling the rating. To draw the line separating the winners from the losers, we carefully went through each of these points:

Stability of the structure;
Frequency of complaints about breakdowns;
Material of manufacture;
Tonnage;
Grab and lift height;
Product type;
Availability of goods in stores.

Each of the devices received the palm, in particular, as a result of a thorough study of the price-quality ratio of products, their disadvantages and advantages, and cost.

The best car jacks

You can find several types of such products on the market - bottle, rack, roll-on, screw and inflatable. They are mainly represented by mechanical models that require the car owner to exert certain physical efforts.

The most reliable bottle type device

Autoprofi Dt-04 – designed for use on a flat, hard surface. The maximum load on it should not exceed 4 tons. After lifting the car, it must be secured to safety supports, which are not included in the kit. It runs on hydraulic oil.

The structure is made of metal and has small dimensions, its height is 15 cm. The device grips the car at a height of up to 16 cm, and lifts it up to 38 cm. The package also contains a crank lever, with the help of which the screw with the transport will rise upward. This bottle car jack weighs 4.

65 kg, its design is calm, the design is red.

Advantages:

Possibility of overload by 25%;
Works in any weather conditions;
Lifts to great heights;
Compactness;
The stand is extendable.

Flaws:

Doesn't fit under the car with little clearance.

Does the declared quality of the Autoprofi jack correspond to this video, which shows its test:

Best car rack and pinion jack

The Matrix High Jack can be used in hand winch mode due to the presence of a towing loop fixed to the end of the rack. With its help, the load rises evenly without warping.

It shows good results in terms of lifting height (from 15 to 70 cm). The operation of the product is facilitated by a folding handle, so it is very comfortable to transport, but you should not count on working with a machine weighing more than 3 tons.

The design is made in China from stainless metal, its dimensions are standard - 90 x 22.5 x 14 mm.

Advantages:

Versatility, can be used for different machines;
Convenient design;
Large lifting height;
The presence of a folding handle;
Smooth ride;
High level of corrosion protection.
Supports Winch mode.

Flaws:

High price;
Not available in all stores.

Kraft KT 820005 is a hydraulic model characterized by ease of operation and maintenance. With its help, the car body rises to the desired height slowly and accurately.

It can withstand up to 3 tons of weight, so it is suitable for all types of vehicles, both passenger and utility vehicles.

But even if the standard is exceeded, this rolling type car jack does not fail due to the opening of the built-in safety valve, as a result of which the piston slowly moves down. The kit includes a comfortable handle, and the car owner will not need to put in much effort.

Advantages:

Uses oil that does not freeze in the cold;
Requires minimal human intervention in the process;
Availability of wheels;
Small sizes.

Flaws:

The price is several times higher than average;
The minimum pick-up height is too high;
It doesn't lift the car that high (about 39 cm).

Best car screw jack

Airline AJ-R-02 is a suitable option for owners of cars weighing up to 2 tons; it simply cannot withstand more. It can easily be classified as a low-lift model, since the device is capable of lifting the car from a height of 10.5 cm and as much as 40 cm.

This allows you to comfortably use it to work with cars whose seating position is not very high. All work will have to be done manually, since the type of product is mechanical. It is very compact, does not take up much space in the cabin and is easy to transport, weighing only 3.

1 kg.

Advantages:

Small sizes;
Light weight;
Low pick-up;
Low cost;
Rubberized upper platform;
Excellent rigidity;
A cover is included.

Flaws:

Unstable on uneven surfaces.

Sorokin 3.693 is an excellent choice for lifting cars weighing up to 3 tons. The main advantage of this product is the ability to use it with a minimum distance of the car to the ground (from 5 cm), even on an uneven surface.

Inflating occurs by supplying exhaust gases through a 3 m long hose included in the kit. The jack is easy to transport; the set includes a bag for this purpose. For its safe operation, two protective mats are provided.

But if the integrity of the shell is still compromised, you can use the patches and glue included in the packaging.

Advantages:

The kit contains everything you need to use the device;
The product is convenient to take with you on the road;
The warranty is provided for a full 3 years.

Flaws:

Cannot be used at temperatures below -15 °C;
Very large size when inflated.

When working with the Sorokin 3.693 model, you should not allow it to come into contact with sharp objects and heated elements of the exhaust system.

Which car jack is better to choose?

Owners of heavy vehicles (from 2 tons) should pay attention to a rolling model with wheels. It is very convenient, but usually weighs up to 10 kg, so this option is more suitable for service stations. Those who often drive off-road should take a closer look at a rack and pinion jack, which can pull a car by the frame, serving, among other things, as a winch.

Of the inexpensive models, bottle ones deserve attention; they are the most popular. For drivers looking for a product with smaller size and weight, and even with an optimal price-quality ratio, the diamond jack is suitable. It has the simplest possible design and there is simply nothing to break here.

If you need to lift a car weighing up to 3 tons, you can limit yourself to the Sorokin 3.693, Kraft KT 820005 and Matrix High Jack models. Owners of an “iron horse” weighing up to 2 tons will be pleased with the Airline AJ-R-02 product. Owners of trucks weighing up to 4 tons will be helped by Autoprofi Dt-04.

This video will help you decide on the choice of a diamond, rolling or bottle jack:

Of course, with the best car jack available, you don’t have to worry about being left in the middle of the road with a flat tire. After this, he can come to your aid more than once, helping out when replacing, for example, shock absorbers, or when carrying out minor repairs that require free access to the bottom.

Did you find apk for android? You can find new Free Android Games and apps.

Source: http://vyborexperta.ru/avtomoto/luchshie-avtomobilnye-domkraty-po-otzyvam-polzovateley/

9 best jacks

Place

Name

Characteristics in the rating

The best rolling jacks

The best bottle jacks

A jack is one of the basic tools that always accompanies a car on any trip. Even people who are far from technology know about its purpose - thanks to its high load capacity, it can easily lift a vehicle for repair work or a simple wheel change.

Depending on the design, jacks are divided into several types:

bottle jacks – hydraulic piston jacks, more often used for lifting trucks, SUVs or other multi-ton cargo;
rack and pinion jacks that require reliable fixation of the base on a hard surface. Capable of lifting loads to a height of up to 1.5 meters;
rolling jacks – hydraulic jacks used for servicing passenger cars. The most common type in the network of service stations;
screw (rhombic) - the most common attribute among car owners. The main operating element is a screw, the rotation of which tightens or loosens the rhombic base.

Due to the widespread use of jacks, a huge number of domestic and foreign companies have become interested in this market segment. Obviously, from such a variety of goods it is very difficult to isolate something worthwhile, especially without having specific knowledge in this area.

That's why we've selected nine of the best jacks for you in three main categories.

The rating was based on the criteria of the popularity of the product in the domestic market, the number and content of user reviews, the overall quality of the product and the compliance of the performance characteristics with the asking price.

3 AUTOPROFI DP-20K

A Chinese “two-tonner” that captivated the Russian buyer with its low price and equipment. In addition to the jack itself, the manufacturer has prepared a “trick” in the form of a special case for storage and transportation - a very smart marketing ploy.

But in terms of technical parameters, everything is a little worse: the maximum lifting height is limited to 330 millimeters, which, in comparison with the leaders, looks frankly faded.

But in terms of ergonomics and general appearance, the AUTOPROFI DP-20K, if it does not come out ahead, is on the same level as top models of jacks.

It’s difficult to say anything definite about durability - the owners’ comments vary greatly, but they still lean towards a satisfactory result.

Advantages:

weighs 9.75 kilograms;
ease of use and appearance are excellent;
Availability of a carrying case included;
low price.

Flaws:

lifting height – 330 millimeters.

A rolling jack made in China, which has gained popularity for its acceptable service life. The weight of the structure is almost ten kilograms, and the load-bearing capacity of the model is limited to two tons.

Mediocrity (relative to the leader) begins exactly when talking about technical characteristics. With a standard lift at a height of 135 millimeters, the peak lifting height of the jack is 355 millimeters.

This is not so little, but slightly worse than that of the top model. The cost savings are insignificant, but the overall performance and ease of use leave much to be desired.

But, as mentioned earlier, the main criterion for MATRIX 51020 is durability.

Advantages:

good value;
durability at a high level (subject to moderate use);
good (but not ideal) lifting performance.

Flaws:

mediocre appearance and ergonomic performance.

As mentioned above, jacks are divided into four main categories: bottle, trolley, rack and screw. Each of these types has its own advantages, features and main disadvantages. Which? We find out from the comparison table.

Jack type

pros

Minuses

Screw (rhombic)

+ High rigidity and simplicity of design

+ The support heel has a large contact area with the surface

+ Versatility

+ Low cost

– Small actual working stroke

– The need to apply a large rotational force to the handle

Bottle

+ Low force on the drive handle

+ Large contact area with the supporting surface

+ High stability

+ Ability to lift heavy weights

– As a rule, a large mass

– Complexity of design

– Large pick-up height

Roll-up

+ Easy to use

+ Low pick-up height

+ Rigid construction

+ Accuracy and safety when working

– A strictly flat and hard surface is required

– The need for periodic checks for serviceability

– Ineffective when working in cold weather

Rack and pinion

+ Large stroke and peak lift height

+ Consistent force throughout the entire pick-up stroke

– Large dimensions and total weight of the structure

– Low stability

– Small contact patch between the support and the surface (when working on unstable ground, a rigid substrate is required)

A high-quality rolling hydraulic jack designed for lifting 2.5 tons. The particular value of this model lies in its German-Chinese origin - the products gained access to the Russian market, and domestic consumers benefited in price.

Compared to its competitors, KRAFT KT 820002 has two very important qualities. One thing was mentioned above - low cost. The second, more generalized, but no less significant, are operational parameters.

The jack provides lifting of an object to a height of up to 385 millimeters with a pick-up level of 135 millimeters. It is convenient to use for cars and SUVs with a permissible maximum weight of up to 2.5 tons.

In terms of ergonomics, everything is also in order - rolling jacks are traditionally more convenient to use than other models.

Advantages:

capable of lifting up to 2.5 tons;
lift height is 385 millimeters;
good ergonomics.

Flaws:

Almost a complete clone of the competing jack Autoprofi DG-08 in terms of operation. The same eight tons of weight, the same maximum lift of up to 405 millimeters with a pick-up of 200 millimeters, with only the absence of overload work.

This is explained by ergonomic indicators, which in this model are much higher than those of its rival in the rating. The weight of the structure is only five kilograms, and it is this fact that prevents the short-term fixation of a larger load.

But it has a positive effect on ease of use. This is not a “stump”, which is equally capable of both lifting and holding the car in case of repair, but only a lift mechanism (which, by the way, is what a jack should be).

This model costs slightly more than its competitor (and also looks smaller), which is why it often becomes a second priority.

Advantages:

good operational parameters (tonnage: eight tons; pick-up at 200 millimeters; lift to a height of up to 405 millimeters);
more convenient to use.

Flaws:

this is the case when increased ergonomics negatively affects popularity.

The jack is of Chinese origin, designed to withstand loads weighing up to eight tons. It is more often used as a component mechanism for trucks, but owners of passenger vehicles are also not averse to purchasing this model.

The main difference from competitors is the presence of a bypass valve, which allows you to overload the piston, giving it (short-term) up to 25% of the overload of the nominal.

In fact, such a jack can withstand up to ten tons, but you shouldn’t overdo it too much.

Autoprofi DG-08 provides lifting of the vehicle to a height of up to 405 millimeters with a pick-up height of 200 millimeters. The mass of such a unit is an impressive 13 kilograms and this is perhaps the only weak side of the ergonomics (and the entire jack as a whole).

Advantages:

acceptable price;
the presence of a bypass valve to absorb short-term additional load;
good lifting and picking height.

Flaws:

quite massive (weighs about 13 kilograms).

A hydraulic jack of a successful series, with average (relative to the same series) operational parameters. The hydraulic piston ensures lifting of the vehicle to a height of up to 413 millimeters + the height of the retractable screw included in the kit.

The maximum perceptible weight is five tons - this characteristic provides an optimal safety margin when lifting a passenger car. However, such a jack has one very unpleasant feature: the minimum pick-up height is 216 millimeters.

For passenger cars with ground clearance less than this value, lifting the side will be more problematic. The cost of the jack is not expensive, but with adequate use it will last for many years.

Advantages:

low cost;
good characteristics of maximum lift;
The kit includes a retractable screw;
capable of lifting up to five tons.

Flaws:

Pickup height is problematic for passenger cars.

A diamond jack from a domestic manufacturer, the quality of which is disputed by a huge number of consumers. Questions arise, first of all, from the main screw, the thread of which (on some models) is eaten away in literally two or three uses. Obviously, this is due to the location of the production line, which is located in China.

But in working jacks, almost everything is good - the actual load capacity fully corresponds to the declared one, the mechanism does not move when a load is applied, and even such a sore spot as the handle is quite tolerable.

The only inconvenience is caused by the rubber pads, which become dented after a short period of use.

And if it were not for a kind of lottery with the quality of the propeller, then the Airline AJ-R-02 could be classified as a priority model, both in terms of cost and performance characteristics.

Advantages (from working models):

stability when applying load;
compliance with the passport load capacity;
Moderately comfortable handle.

Flaws:

a huge problem with the Chinese assembly line, which produces good models every other time.

A full-fledged “Chinese” with all the ensuing consequences. Surprisingly, one of the most successful models in the series, which is also not without flaws, but to a much lesser extent.

However, they all relate more to ergonomics than technical issues. When a load is applied, the screw (diamond) jack may move to the side, so installation should be done carefully.

The handle, more reminiscent of a cardan than a clear mechanism for lifting the base of the jack, is also unimpressive.

As for the technical characteristics, the lifting height is limited to 390 millimeters, to which, however, the jack should not be raised. The pick-up height is 100 millimeters, so the AUTOPROFI DV-15R is guaranteed to be suitable for standard passenger cars (the minimum ground clearance of which is 140-150 millimeters). An adequate option for a small amount.

Advantages:

peak rise is 390 millimeters;
withstands the declared weight (1.5 tons);
attractive price.

Flaws:

ergonomics leave much to be desired.

The product of a holding company whose production sites are scattered throughout Russia, the CIS countries and, of course, China. It is unknown who makes this particular jack, but judging by consumer reviews, it seems that several departments are involved in this. The quality of the product as a whole is equal, but it does not do without individual excesses.

In general, the model with a maximum load capacity of two tons is the most stable in the series, since jacks of 1.5 and even more so one ton even visually look more flimsy (and this is not the flimsiness that depends only on the maximum perceived weight). The base is much more powerful, there is practically no play or laxity, but the handle and rubber pads are only suitable from time to time. There are no complaints about the operational part, as well as the cost.

Advantages: