Fur covers for car seats - comfort and beauty of your interior
A variety of fur capes and covers are no longer a luxury, but a necessary accessory for any car. They have excellent heat-saving properties. This is especially noticeable during periods of severe frost.
Unlike electric heating, natural fur capes constantly keep the seats warm, which is very important when the car is not used regularly.
Thanks to this, being in the car is comfortable not only for the driver, but also for his passengers.
Fur car seat covers
- They will protect the chassis and save you money, increasing ground clearance by 3 cm.
In most cases, car owners use fur covers only in winter. But this does not mean that these products cannot be used in the summer. On the contrary, car capes made of natural fur are very comfortable in the hot season.
First of all, this applies to sheepskin products. This material perfectly retains its properties at any time of the year and, moreover, absorbs moisture very quickly.
Thanks to this, covers made of natural sheepskin are simply irreplaceable in cars that are not equipped with air conditioning systems.
By purchasing fur products for the steering wheel and seats, the driver will be able to solve two problems at once. Firstly, the car owner will make the operation of his car more comfortable, and secondly, he will perform spectacular tuning of the car’s interior.
Thanks to a wide selection of sets of fur covers, both the owner of a luxury SUV and the driver of a budget compact car can find a suitable accessory.
With the help of covers, a car owner can transform the interior of his car beyond recognition in literally a matter of minutes.
Set of fur covers
The main advantages of fur capes include:
- original appearance;
- ease of use;
- light massage effect;
- products are protected from abrasion and mechanical damage;
- practicality in care.
The original appearance of the capes
In addition to the advantages, fur capes have several disadvantages. The first is their cost. It is unlikely that you will be able to purchase a set of 4 seat covers and one for the steering wheel at a price below 5 thousand rubles. In addition, natural products are susceptible to attack by moths and other insects.
Don’t also forget that such car accessories can absorb antifreeze or spilled motor oil that has leaked into the cabin. After this, the covers begin to emit a strong odor.
In this case, the car driver has no choice but to change the antifreeze and take the capes to the dry cleaner.
Before you go to the store for a set of fur covers, it is worth studying some of the nuances. Based on them, it is very easy to decide whether this or that set is suitable for your car.
Before purchasing, you need to check your car seats for airbags. If they are, then it’s worth purchasing the corresponding covers.
In the store, you should pay attention to the presence of holes in the covers for the spokes in the car's steering wheel, headrests and seat armrests.
Fur cover for car steering wheel
If the necessary slots are not available, this will significantly complicate the use of the pads. If fur products have all the necessary holes, then for each of them there must be a corresponding fastener.
With their help, we can protect car seats and steering wheel covers from dirt in the places where the covers are attached. Each fur product must have a foam lining.
It protects the cover from deformation and also prevents the cover from slipping when operating the car.
Product made of fur for a car steering wheel
Despite the large selection of fur covers, there are times when a car driver cannot choose something suitable for himself. In such a situation, you can make capes yourself. Doing this is not as difficult as it seems at first glance. The main thing here is the correct measurements of those interior elements that you are going to “put on”.
Making seat covers with your own hands
So, let's start measuring the seats. If you plan to sew a cover, then you need to get the dimensions of the entire seat and each of its elements separately.
If we are talking about a cape, then you need to get the length and width of those parts of the seat that will be covered with fur products. In order not to waste extra time, take old covers from your car, cut them out and take the necessary measurements.
The resulting pattern is transferred to the wrong side of the fur. In order not to forget or confuse the length and width, it is better to use cardboard or greenhouse film.
It is very important when specifying dimensions on fur to leave approximately 1 cm of margin on each side of the material. This stock will become our seam allowance. If you want to use a foam lining, then you will need to cut it out too.
In this case, it is necessary to leave technological gaps in all necessary places. All required linings and pockets for covers should be cut out in advance. During the cutting process, do not forget about such a feature of fur as its tendency to fray.
Try not to cut the material too deep, otherwise bald patches may form at the seams.
Case cutting process
After cutting, we begin stitching the material, according to our measurements. This can be done either by hand or using a sewing machine. All seams are placed on the inside of the fur.
After we have finished stitching the products, we need to work on their decor. To do this, we turn on our imagination and decorate car covers with appliqués or fasteners.
If desired, you can sew small pockets on the products.
After we have made accessories from natural fur, we will not be afraid of any frost. Put covers on the seats and steering wheel of your car, and you will see how much its interior has changed. By the way, fur products look very dignified in a salon with frame curtains on the windows. Such a car will not leave either pedestrians or other drivers indifferent.
Source: http://tuningkod.ru/stajling/tyuning-salona/sidenya/mehovye-chehly-nakidki-avtomobilnye-sidenja.html
How to sew car covers with your own hands: patterns
Pattern of car covers with your own hands
Today we will tell you how to sew car covers with your own hands. You can also prepare patterns for this operation yourself. After all, if the car is used intensively, then sooner or later you will definitely have to change the upholstery to a new one.
You can do this at a car workshop or buy ready-made covers in a store, but in the first case it will be expensive, and in the second there will be no individuality. Therefore, the most profitable option would be cutting and sewing yourself.
Choosing material for a car interior
Among all the variety of fabrics in stores, it is necessary to choose the most practical materials to use. Leather upholstery or its artificial substitutes have a large number of fans. It is easy to care for and does not wear as much. However, in the cold season, leather upholstery does not retain heat. It also does not tolerate sudden temperature changes.
Set of cases made by yourself
Neoprene has proven itself well. The material is completely artificial, resistant to intensive use, stretches well, and is non-flammable.
You can also sew a cover for a car seat with your own hands from polycotton. This material combines the positive properties of polyester and natural cotton. The fabric is machine washable, so caring for it is very easy.
When using velor, you can make inserts from other materials. This will highlight the advantages of the fabric and add individuality to covers or capes.
Fur upholstery made from natural and artificial materials is popular. A large selection of materials and colors will help you create any image for your car interior.
Preparing for surgery
Before you start sewing covers or cutting them out, you need to prepare the following tools:
- sewing machine;
- a set of sewing needles and pins;
- cutting chalk or marker;
- tailor's meter;
- tailor's scissors and a construction knife.
Pattern for universal cases
Measurements are taken from the car seats in advance. In order to transfer all the patterns onto paper, you can use newspapers or album sheets glued on one side with tape. Some beginners use large-area oilcloth, however, it is not very convenient to work with.
When transferring dimensions to a pattern, you need to remember to add 1-2 cm to the seams on all sides.
Sewing process
After you have prepared a pattern for car covers with your own hands, you need to start connecting the parts. When stitching, you can additionally strengthen the seam with a strong insert made of leather or nylon tape. This will ensure durability and practicality of the covers.
The main fabric should not be too soft. This may give the item a baggy appearance. To give it shape, the side inserts can be made from a more rigid material, providing a more durable frame for the entire structure, as well as diluting the design with a new texture.
Ribbons, elastic bands or hooks must be added to finished products for good fixation. With their help, the covers do not slide off the chairs.
When forming a pattern and sewing it together, it is necessary to comply with the design features of the back sofa. It may have an armrest in the middle. You need to make sure that new covers do not reduce the convenience of the car and allow you to enjoy all the advantages of the design.
The rear passenger seat is often divided into two parts for reclining and access to the trunk. This way you can transport long loads. New covers must take this feature of cars into account. When cutting and sewing, you need to cover the chair on all sides with new covers.
Security
Foreign cars can be equipped with end airbags. In order not to reduce the level of protection for passengers and the driver, it is necessary to ensure that the seams at the exit points of the airbags are sewn with weak threads. You can also leave neat machined slits for this operation.
Interesting on the topic:
http://ktonaavto.ru
Source: http://legkoe-delo.ru/remont-avtomobilya/avto/83904-kak-sshit-chekhly-dlya-avtomobilya-svoimi-rukami-vykrojki
Health, life, hobbies, relationships
Any motorist, sooner or later, needs to replace the seat covers in his car. This work is painstaking and will take a lot of time, which is why some people prefer to leave this task to the master and not bother.
But since changing all the covers in a car is not a cheap task, not everyone can afford it.
So what to do if money is tight, but for the new season you want to give your favorite car new covers? There is a way out: purchase high-quality upholstery material and reupholster the car seats yourself.
Scheme for constructing a pattern for car seat covers:
- From thick, transparent cellophane, cut out a piece slightly larger than the overall dimensions of the car seat and use a colored marker to transfer onto it all the outlines of the parts of the car cover along the seams.
- The resulting pattern is cut into separate parts, which should be checked against the cover and then transferred to a more rigid base, such as cardboard, to create a full-fledged pattern. In the diagram presented you can see elastic bands with hooks; they are designed to securely attach the new cover to the seat.
- We transfer the pattern to the fabric, not forgetting to leave seam allowances of 1 cm. In order for the new covers to fit without problems, they should be sewn a little larger, up to 0.5 mm. This will prevent possible errors in patterns.
- We sew the parts of the cover together, simultaneously aligning and adjusting the flaws.
Conventionally, all car covers can be divided into the following groups:
— Sports;
— Volumetric;
— Model;
— Combined;
— Anatomical;
— As a separate type, you can take out covers for headrests and armrests;
Among the most popular materials for the manufacture of car covers are: leather, flock vinyl, velor, artificial leather and eco-leather.
Leather (auto leather) is a material developed specifically for the interior of a car, durable and wear-resistant, repels drink and dirt.
Flock is a material that is widely used for furniture upholstery. Relatively cheap, but nevertheless durable material.
Velor is a pile fabric that does not fade or shrink. This material is waterproof.
Eco-leather is a breathable, light-resistant material that is highly resistant to numerous creases and bending, and has the ability to resist cuts. A new material on the car upholstery market.
Patterning car covers using the presented algorithm will not cause you any problems, since it is done quite quickly.
You need to approach the choice of material responsibly, carefully consider combinations of various materials and textures, and then the interior of your car will be a reason for your pride.
By reupholstering the seats, you, first of all, breathe a second life into your car, refresh the interior and give yourself and your passengers the feeling of a new car, just purchased, but nevertheless familiar to you for a long time.
Source: http://GoldStarInfo.ru/2012/04/19/vykrojki-avtomobilnyx-chexlov/
DIY car covers: not difficult at all
Naturally, sitting in a car is an integral part of it.
But during the daily use of a car, the outer covering of the seats suffers from external factors such as abrasions, scratches, wear and many others.
But they can be protected from this with the help of special covers. In stores you can choose any to suit your taste and color. Of course, you can also make car covers with your own hands, and besides, it’s not at all difficult.
What material can you use to make car covers with your own hands?
Almost any material is suitable for sewing car covers, especially since there should be no problems with its selection and purchase. There is now a huge selection of fabrics in stores.
If you regularly care for your car, leather is an ideal option for covers. It is much easier to remove stains from such material.
The status of a car with leather covers will rise significantly, and it will look much more solid in appearance. But we must not forget that the skin is very sensitive to sudden changes in temperature.
Also, such covers should not be used in car interiors where there is no air conditioning.
Neoprene can also be a good material for sewing. It is a synthetic material that is wear-resistant and can stretch. Perfect for those who smoke indoors, as it is non-flammable.
Poly-cotton material is another option for the material used. And since it has water-repellent properties, it can be washed directly in the washing machine.
When using velor, your car can be given a very impressive appearance. This material is pleasant to the touch and at the same time very durable.
Sewing covers for car seats
Undoubtedly, one of the ways to emphasize your individuality is to sew car covers yourself. For this, in addition to the material, you will need:
- tape measure or ruler,
- scissors,
- sewing machine.
First you need to take measurements from the seats, and then make a pattern. For greater convenience and accuracy, you can use plastic film to transfer the dimensions to the sketch.
When taking dimensions, it is necessary to add 2-3 centimeters on each side on pieces of fabric, in order to subsequently connect the cut parts together with a basting seam and subsequently sew them on a sewing machine.
Sewing car covers with your own hands is not a difficult task; all that is required is to make something similar to bags, and then connect them together on one surface.
Of course, there are ample opportunities for improvisation here. You can add some elements to make the covers more beautiful or make a few additional stitches in the form of a pattern.
To make the cover fit tighter on the chair, you can add small ropes or miniature hooks to it for a tight fit.
You also need to think about the seat belt. It is important that the case does not interfere with its use!
Some car enthusiasts have their seat covers repaired after long-term use and wear.
After all, it is not at all difficult and saves a lot of time. When the question arises of how to make car covers unique, one should not forget about the safety and ease of use.
Will the presence of additional hooks and tapes on them interfere with the driver's ability to drive a vehicle, or will they be dangerous for children?
Carefully choose the material from which you want to make your own car covers. Because, for example, denim is very hard and does not lend itself very well to machine sewing.
Another material may fail in its strength. Here it is important to choose a fabric that will satisfy at least most of your requirements and the process of working with which will not be difficult.
Source: http://mne-30.ru/chehly-na-avto-svoimi-rukami/
DIY car covers
Car seats are an integral part of any car.
Many car enthusiasts, in order to prevent chafing and wear of the factory fabric covering, purchase special car covers in the store, or have them sewn to order in special studios.
You can also sew car covers with your own hands, having car seat patterns, your chosen fabric, a sewing machine and a little skill and patience. Below is a photo of a sample of making car covers with your own hands.
Choosing fabric for car covers
The choice of fabric from which you decide to sew covers must be taken very seriously, because their service life, wear resistance and, most importantly, how they will look in the interior of the car will depend on the quality of the fabric. Auto studios like to work with synthetic materials, such as velor, neoprene, poly cotton, and artificial leather.
These fabrics are distinguished by their low cost compared to natural fabrics and the fact that they are better cleaned from dirt. But it also has its drawbacks: synthetic fabric is not always pleasant to the touch, artificial leather gets very hot in hot weather, and such fabrics are easily flammable when exposed to an open fire.
This fact should especially be of interest to all motorists who abuse such a bad habit as smoking.
https://www.youtube.com/watch?v=3lsIVtNz3nE
As for natural fabrics, they are much more expensive than their counterparts, but they are comfortable, breathable, pleasant to the touch, non-flammable and look good. Covers made of velor and genuine leather will look very rich and practical. Your choice depends on your preferences and the money you are willing to spend on it.
Taking measurements for covers
Before you start sewing covers, you need to learn how to take measurements correctly and make patterns on the fabric. After all, how your product will ultimately look depends on these two components. If you don’t get the size right, the cover may either bulge, or may not fit at all, or will look sloppy and not fit the given chair.
Below is a photo of an approximate drawing of car covers.
The easiest way to take measurements is using transparent polyethylene. Everything is done quite simply:
1) Take a piece of polyethylene the size of a seat;
2) We apply it to the seat and use a marker to outline each part of the car seat;
3) Then we cut out the parts and once again apply them to the source;
4) If everything fits, then transfer the patterns to cardboard and cut out a normal, convenient template;
5) Using templates, we cut out the material, not forgetting to leave a few centimeters for allowances.
Sewing car covers in the form of seat covers
Car seat covers in the form of capes look no worse than regular covers and also protect well from dirt, abrasions and water, are easily removed if necessary and can be easily machine washed.
Such covers are suitable for lovers of outdoor recreation. In this case, you can choose any fabric to your taste and color. Capes do not take much time to make and cut, and if necessary, they can be easily replaced with new ones.
Below is a photo of the finished work.
Take a piece of fabric equal in width and length to the car seat. We retreat 25 centimeters from the edge of the fabric and make a mark, measuring the middle along the width. Then we take measurements of the headrest of your car - the circumference and divide this number in half. Using the mark made, we mark the calculated number on both sides of it. Draw a line and make a cut along it.
We make edging along the cut and along the entire perimeter of the fabric. We put the resulting cape on the chair. Also, for convenience, you can sew a pocket on the back of the case, in which you can put various small things you need on a trip. Similar covers can be made for rear car seats by first taking the dimensions.
At the end of the article you can watch a video on sewing covers.
Crochet car cover
Who would have thought that crocheted covers would gain great popularity.
The work is very labor-intensive and will take a lot of time, but you will be the owner of completely unique car covers. First, you need to decide on the choice of yarn, since the item is not made for one season, it is worth comparing all the pros and cons. The yarn should be strong, moderately soft and not scratchy.
Macrame yarn is ideal for these purposes. We do all the necessary calculations for the car seat. As for crocheting itself, there’s a lot of skill here. You can crochet flowers or just diamonds, squares, or make a grid. The choice of patterns that can be crocheted is huge.
And in this case, everyone chooses what he likes best.
Video on the topic
At the end of this article about how you can sew car covers with your own hands, we offer a selection of videos for a more detailed study of this topic. Enjoy watching.
Source: http://sdelala-sama.ru/shityo/2214-chehly-dlya-avtomobilya-svoimi-rukami.html
Pattern of car covers with your own hands – Automotoguru
Of course, the seats in the car are an integral part of it. However, as a result of the active use of the car, their, as a rule, fabric covering is affected by negative external factors, among which, first of all, scratches and abrasions should be highlighted.
To protect car seats from rapid wear and tear, many drivers purchase special universal covers. Currently, stores offer a wide range of them, so finding cases made of a certain material and made in a specific color option will not be difficult.
However, you can sew car covers yourself. This is not at all difficult to do, and it will also save money that other car owners spend on the purchase of finished products.
Which material to choose
Almost any material is suitable for sewing car covers. The selection of fabrics and their colors presented on store shelves eliminates any difficulties in selecting material for future covers.
Diamond stitched
Another material that can be chosen for sewing covers is neoprene. It is a synthetic fabric that is wear-resistant and stretchable. This material will be a real godsend for those who are used to smoking indoors, since it is not flammable and will be quite difficult to burn through.
Polycotton can also be used as a material for making car seat covers. It is characterized by water-repellent properties, so machine washing would be quite appropriate.
Cases made of leather and velor
The cover can be made from fabric such as velor. This material is quite durable and pleasant to the touch, and thanks to it the interior space takes on an impressive appearance.
Sewing process
Undoubtedly, car covers will add personality to your car and make its interior more practical. To make them you will need:
- scissors;
- ruler and tape measure;
- sewing machine.
First of all, all dimensions must be taken from the seats, after which a pattern is made. To transfer all measurements to the sketch, you can use plastic film for greater accuracy and convenience.
Car seat cover pattern
Making car covers is not a difficult task. After all the cut out parts are sewn together, you will have products that resemble bags that will need to be pulled over car seats.
If you wish, you can use your imagination, because the process of creating exclusive cases opens up wide opportunities for improvisation. It would be appropriate to decide to add some elements that will make these products even more unique. It wouldn’t hurt to use a sewing machine to make several lines that form a beautiful pattern.
It can be assumed that self-produced cases will be of higher quality than those offered to customers in stores. Consequently, the products you create will last much longer, and the correctly selected material with which the seats will be covered will provide reliable protection against scratches and abrasions.
Photo
Fur
Knitted, square pattern
Openwork
Gray color
With flowers
Plush
Source: https://avtomotoguru.ru/vykroyka-chehlov-na-avtomobil-svoimi-rukami/
How to sew car covers with your own hands?
Car seat covers are an opportunity to protect the seat material itself from abrasion, dirt, and mechanical damage. This is also an excellent opportunity to update the car’s interior if it is already a little “tired” from long-term use.
In addition, the covers are very easy to remove and wash, exchange for new ones, or choose a different color. This is also much cheaper than ordering dry cleaning of the interior for any serious contamination.
In a word, if you want to buy a Mercedes Benz or a car of another brand, immediately take care of protective covers, and then your seats will remain new for a long time. You can also sew the covers yourself.
This is very easy to do - the “clothing” for the seats can be sewn by hand or on a machine, knitted, appliquéd, etc.
As a rule, such hand-sewn products will be even higher quality than factory or purchased ones for your make and model of car.
In addition, they will fit perfectly, because you are sewing them on specific seats. We offer sewing recommendations and step-by-step instructions on how to do it yourself.
Selection of material
Everything should start with the choice of seat material. Fortunately, today there is a huge range of different fabrics available - from genuine leather to the simplest artificial textiles.
Leather, by the way, will be the most expensive, but it is easy to clean without removing the cover. Synthetic leather will be thinner, but just as durable, and it’s also easy to work with.
There is also a “suede” option (Alcantara), which can be safely washed in a washing machine.
You can choose velor and velvet, plush, faux fur, natural or synthetic fabrics. Natural fabrics will be good for hot summers; they quickly absorb moisture and do not create a greenhouse effect. But cotton, for example, will quickly wear out and become dirty - such covers will need to be changed more often.
It is good to choose synthetic options based on polyester - they perfectly repel moisture and dirt, and are very easy to wash.
Polycotton has also proven itself well - a natural-based fabric with water- and dirt-repellent impregnation. When choosing fabric for sewing, it is better to choose a denser one to prevent it from wearing out quickly.
But at the same time, try to choose an elastic and stretchy material so that the finished cover fits well on the seat.
How to make a pattern?
In order to make the pattern correctly, you need to carefully measure the seat itself. Measure the area of the seat and be sure not to ignore the side parts - volumetric seats also use a lot of material on them.
Take a ruler or tape measure, or better yet, a measuring tape, and measure all visible distances.
Another convenient option: place a transparent plastic film on the seat, trace all the seams, and then place the sketch on paper or directly on the fabric and cut along the lines.
If you take paper, it will be convenient to trace its contours on the fabric with colored chalk, and on dark fabric - with ordinary soap. Do not forget to add 2-3 centimeters to each measurement from seam to seam - this is necessary in order to make this seam by folding the fabric inward. If the distance is small, the seam will be weak.
Sewing process
After you cut out all the parts and sew them, you first need to sew them with a basting stitch by hand - using large stitches to simply connect the elements of the cover in advance. When the product is ready, put it on the seat and check if everything fits.
By the way, usually the official dealer of Mercedes in Moscow and other brands sometimes offers “original” factory covers made of elastic fabric - this way sewing errors will not be visible, and the fabric will fit exactly on the seat and will not bulge. If there are no errors and the cover fits perfectly, you can sew it on a machine.
It is recommended to make a double seam for greater density and strength.
Don't forget that modern cars have built-in airbags in their seats that deploy in the event of an accident. Be sure to leave the seam open in these areas or make additional cuts. They won't be noticeable visually, but pillows can save your life later.
Useful tips
Pay attention to the “original” factory seat covers for your car - usually there are thicker inserts in the seat and back areas. This is necessary in order to constantly withstand the load of a sitting person.
You can hem the wrong side with thick soft fabric or even a thin layer of foam rubber. You can make inserts in the middle from another, denser fabric, and the side inserts from a beautiful material that will serve a purely decorative function.
You can sew some appliques onto the fabric to make them truly unforgettable and original.
A useful addition would be pockets on the back of the seat for rear passengers or various hooks and strings for ties. Just make sure that they do not interfere with passengers, much less the driver.
Pull the covers carefully so as not to tear the seams, and don’t be surprised if they fit very tightly at first. Some parts can be sewn directly onto the seat to secure them firmly.
If there is a plastic pad at the bottom of the seat, be sure to remove it and put it back after putting on the cover - it will fix the fabric even better.
Source: http://StranaHandmade.net/sovety/kak-sshit-chehly-na-avtomobil-svoimi-rukami
Sewing car covers: we’ll do it all ourselves
Like any other thing, car covers deteriorate over time. Their service life is affected, of course, not only by their quality, but also by the intensity of use. Not only light models of covers, but also dark ones, require regular washing.
But what to do if you urgently need to clean your existing factory “clothes”, but you don’t want to travel without them? Of course, there is no need to run to the auto store for another set, especially since this will require certain costs. You can find a simple and budget-friendly way out of this situation - make car covers with your own hands.
Despite the apparent complexity of the process, with certain skills, you can sew a seat cover in just a couple of hours.
The first stage is choosing the “right” fabric
Many car enthusiasts prefer to sew their own covers, not only to save money, but also to give the car a unique look.
Fabric for car seat covers should be selected with particular care. The fact is that the comfort of passengers and driver largely depends on the material.
If we consider the fabrics that are used by salons for sewing “clothes” for custom-made chairs, it will become clear that they most often offer consumers products made from synthetics. This product is very practical: it is durable, gets dirty a little, and is easy to clean.
The car owner can order an “outfit” for seats made of velor, polycotton or neoprene (such covers are characterized by high fire resistance).
However, despite all the positive properties of synthetic fabrics, they have one significant drawback: the flammable material slips and is unpleasant to the touch. Synthetic covers are best used in autumn or winter.
In view of this circumstance, seat covers that will be used in the summer are best made from natural fabrics that are breathable and do not irritate the skin.
Genuine leather will also be a good material option for covers for this period, however, if it is dermantine, then the driver will sweat a lot.
The second important criterion is cost. A ready-made original set that will fit perfectly on the covers will cost almost six to ten times more expensive (depending on the manufacturer) than a home product. From a practical point of view, sewing car covers yourself will only require material costs.
The second stage is taking measurements from the chairs
After the “right” material has been selected, it is necessary to make patterns. Sewing perfectly fitting car covers requires taking measurements. After all, even a cover made of eco-leather or other fabric sewn by the skillful hands of an experienced seamstress will bulge unsightly if it is not sewn to size.
Discounts on new cars! Advantageous loan from 9.9%
Installment plan 0%
To make patterns, you need:
- take cellophane or a piece of transparent polyethylene in advance, the size of which will correspond to the dimensions of the chair;
- place the prepared polyethylene on the seat in such a way that you can trace each element separately along the seams using a dark marker;
- check the correspondence of the pattern with the actual size of the chair by attaching the cut out parts of polyethylene;
- transfer the resulting patterns onto cardboard (it is more convenient to work with denser patterns);
- transfer the blanks to the material (the details should be outlined with an additional 2–5 centimeter seam allowance).
Cutting diagram for home car covers
If a car owner does not want or cannot purchase an original set of “clothes” for his seats, he can learn from the material below how to sew car covers with his own hands without spending much money.
If you purchase the material you like in advance and prepare patterns, then, after cutting out the parts, you will only need to stitch the individual elements together and equip the product with fastening components (the easiest way is to make ties).
Patterning covers is not a very complicated process, however, when making them, it is worth remembering that an overlap made half a centimeter larger than the size of the seats allows you to sew loose covers that fit better than “clothes” sewn strictly according to the dimensions of the chair.
Creating simple cases that require no skills
If there is a need to equip your car with original handmade covers that would not require large labor costs and financial investments, you can make such a simple “robe”, to create a pattern for which you only need to measure the volume of the headrests.
The easiest way is to create a car cover with your own hands that would look like a cape. This product can protect chairs from moisture, sand and dirt.
Even if the necessary material is not available, you can use an unnecessary thick terry towel or sheet that would be equal in width to the seats.
An oilcloth tablecloth, which will act as a water-repellent layer, will not be superfluous.
Sewing car covers for a car will require a relatively long piece of material. First of all, you will need to step back 25 cm from the edge of the fabric to leave some to hang from the chair. At approximately the same level, it will be necessary to mark the center of the future cover, having additionally learned about the required width of the product.
The volume of the headrest must be divided by half so that the horizontal line located in the center corresponds to the found value. The next step is to cut the holes according to the drawn lines.
After a pattern is made from the material, it is necessary to adapt an oilcloth tablecloth from which an identical blank should be made, which would have additional centimeters for indentation on the sides.
To understand how to make such a homemade blank for car seats, you need to place the tablecloth face down, and the terry cloth, respectively, face up. The indents on the bottom layer should be folded inward and the edges pinned together with needles. After this you can start sewing the parts together.
After everything is ready, you need to run a stitch along the edge of the slot to carefully process it.
Conclusion
Simple seat covers can be made with your own hands from scrap materials in just a couple of hours. Moreover, such a product can be sewn not only on the front, but also on the rear seats.
By the way, the more the edge hangs down below and on the sides, the better the chair will be protected from sand, dirt and moisture, which especially often get into the car in autumn, spring and winter.
For the first time, you can try to make simpler car covers, and then, having gained experience, make more interesting original covers from leather or fur.
Source: https://remam.ru/cabin/sshit-chehly-dlya-avtomobilya-svoimi-rukami.html
Pattern of car covers
How to make your car different from others? One way is to make your own covers. The task is simple, but a person who knows how to sew can handle it. By showing your imagination, you can get excellent results.
You can go beyond seat covers and make a cover for a child seat, small cushions for the seats, and even completely reupholster the interior.
For all this you will need thick fabric or leather, make patterns based on which the car covers will be cut, and not a lot of imagination.
Fabric for car seat covers
The fabric for making covers must be durable, wear-resistant, with a stretch effect that guarantees an excellent fit of the product. Such fabrics are used for upholstery.
Flock is an excellent fabric for sewing covers. Despite its low cost, it is convenient to cut and easy to stitch. To work with this type of fabric, the use of special tools is not required; a regular sewing machine is sufficient. Considering that the fabric has a knitted base, it stretches well over the seats, is easy to clean, impregnated with a dirt- and water-repellent composition, and is very durable.
Faux leather or suede is a very popular material for sewing covers. Options for this material can be stretch leather, perforated leather, fleece leather, and so on. Agree, leather interior has always been and remains in fashion.
At the same time, this fabric is a little rough in itself; the seams cannot simply be ironed out, so they need to be beaten with a rubber hammer. This is where the power of your sewing machine may not be enough, so take this point into account.
Many people prefer to make only the sides and bottom parts of the covers from such fabrics, and the backs and seats from a more pleasant material. Artificial suede provides greater comfort in work and is pleasant to the touch.
Faux fur is also a fairly acceptable option. The choice of such material on the Russian market is quite large and can satisfy any consumer preferences. Whether to use such material entirely for the seat or for its individual elements is a matter of taste.
Pattern of car covers
How to make your car different from others? One way is to make your own covers.
The task is simple, but a person who knows how to sew can handle it. By showing your imagination, you can get excellent results.
You can not limit yourself to seat covers and make a cover for a child seat, small cushions for seats, and even completely...
Source: http://elegs.ru/rukovodstva/vykrojka-chexlov-dlya-avtomobilya.html
Loading...
