How to open a car without a key

How to open a car door without a key

There are many different accidents and surprises in our lives. For owners of their own car, the percentage of accidents increases.

For example, imagine a situation: you are standing near your car, the doors of which are closed, and you cannot get inside, and you do not have a key.

The first feelings that appear in the driver in this case are confusion, which develops into anxiety, and this is connected with one problem - how to open a car door without a key and not damage the door.

An impulsive person may even break glass in a rage. This option is, of course, far from the best, but even though it is radical, the problem can be solved as quickly as possible. Of course, if your location is far from civilization, breaking the glass is the only right decision. Especially if you don’t have any improvised means at hand.

If civilization is located within walking distance, you can resort to the help of professionals.

What should I try to open myself or call specialists? Let's look at the possible options for opening your car if you decided to do it yourself.

The first option requires the presence of a thin rope or fishing line. Before using this “pick” you need to make a loop in the middle. Next, you need to thread the rope, holding it by the ends, along the upper edge of the door. If this does not work, bend the door using available means, for example, a wooden wedge.

Your goal is to move the rope or fishing line to a position where the loop will be on the inside button responsible for blocking the door. But not everyone can use this method, since modern models have a flat and smooth button that cannot be caught on. But this method can be used by owners of domestic cars.

Another option - how to open a car door without a key can often be seen in movies when the bad guy stuffs something between the seal and the glass. A couple of moments later the door opens. We will use wire with a hook at the end. This wire should have medium stiffness, the hook should have an angle of 45 degrees.

In this case, you need to perform the following steps. Push the wire where the door handle is and catch the door pull. Once you feel caught, start moving upward to open the door.

But it should be remembered that in this way it is easier to open domestic cars than foreign cars.

In addition to the methods listed above, to open a car door without a key, you can use a drill to drill out the lock. You can also press the door using a wooden wedge, methodically tapping the wedge with your fist until the door opens to insert the wire.

How to open a car door without a key - there are independent methods for opening cars, but you should be careful when performing them so that significant material damage to the car is not caused.

Source: https://sochi-avto-remont.ru/kak-otkryt-dver-avtomobilya-bez-klyucha/

How to open a car without a key

Any driver, due to certain events and circumstances, can lose a car key. It's very frustrating to lose your key, but it's much worse when it's in the ignition, the engine is running, and the doors are completely locked.

In this case, it is not possible to open the car with a spare key, since the door locks do not work due to the mechanical drive being turned off. There is no need to panic or be nervous in this situation, since there are many different ways to open a car without a key.

We will try to talk about all possible options in detail in our article.

Ways to get into a car without a key

Before you open your car without a key, you need to decide on the method that will be most convenient and cause the least harm to your car, nerves and wallet. You can choose one of the following methods:

Domestic cars can be opened using a rope with a loop

Break the glass. This is a fairly quick and simple solution to the problem, however, it is not the most economical. Replacing glass will not be cheap, even if it is a rear blind window. In this case, there is a high probability of injury, especially if safety precautions are not followed. You can only break glass with your fist without cutting yourself in the movies. It is best to use something heavy, a stone or a hammer, wrapped in a rag.
Use a wooden wedge. It is necessary to find or make a wedge with a base thickness of 3 to 4 cm and a length of 20-25 cm. You should also arm yourself with a metal rod with a hook at one end. Very carefully, using a wedge, you need to bend the edge of the door, carefully driving it into the gap between the post and the frame. A rod with a hook is inserted into the made slot, with which you can turn the blocker.
Use a wire hook. For this method, you will need a rigid thin wire with a length of 60 to 80 cm, at the end of which you should make a hook with an angle of inclination of 45° and a length of about 10 cm from the bend. The wire hook is inserted between the glass on the handle side and the built-in seal. It is necessary to hook the door rod, then pull the hook up and open the door. This method can be applied to any domestically produced car.
Use an electric drill. You will need to drill out the core of the door lock, which will allow you to open the door. In addition to a drill, you can also use a metal blank, which is similar in shape to a key. It should be driven into the cylinder and, with some effort, turned. There is also an opinion that steel nail scissors or a flat-tip screwdriver can replace such a blank. In any case, this method entails replacing all the cylinders or wearing different keys.
By bending the door seal you can open the door with a wire hook

Use wire up to 2 meters long. The locking system in foreign-made cars works in such a way that when the door handle is opened, the central locking unlocks. This feature is used for emergency door opening. Make a small hook on the existing wire. It must be carefully inserted into the gap between the counter and the top of the door. Gradually penetrating into the interior, you need to make bends and try to pick up the door handle. Once you have hooked it, pull the wire and the door will open easily.

Use of rope or cord. For this method, any piece of cord or rope up to 1 meter long with a loose loop in the middle is suitable. The loop is inserted between the upper corner of the selected door and the counter. When it is not possible to do this, the corner should be bent using available means. The loop must be lowered onto the door lock button, tightened and pulled up. This method is only suitable for those cars in which the closing button is located at the top of the door panel and protrudes slightly above the surface.

Call professional specialists. This type of service is quite common. The craftsmen have a set of special tools, work very quickly, and the cost of such a procedure is much cheaper than repairing a deformed, scratched door or broken glass.

Benefits of calling an emergency opening service

Some emergency opening technicians still use outdated methods

A qualified specialist will immediately understand how to open a car without a key. In this case, all his actions will be coordinated with the owner of the vehicle.

The emergency opening wizard can offer the following:

On expensive cars, the procedure is performed through the use of special equipment that minimizes the risk of any unwanted damage. This type of work is very expensive, however, it guarantees high quality of the work performed.
Emergency opening. The process completely duplicates the previously described steps of the fifth method. The only difference is that the procedure uses pneumatic tools, a telescopic manipulator and special suction cups for glass. Most often, this method is used by craftsmen who do not have modern equipment or do not know other methods.
Penetration into the interior through the glass seal. To perform such work, the master must have a good understanding of the machine's locking mechanism, have certain skills and special tools. This method does not guarantee the integrity of all internal mechanisms. Sometimes it causes additional costs associated with the repair of car locking elements.

Source: http://ktonaavto.ru/avto-faq/raznoe/kak-otrit-avtomobil-bez-klucha.html

How to open a car without a key. Several ways to open the car

When your car doors are locked and your key is left inside the car or lost in the land of lost things, don't panic—you can open your car door without a key.

First way

Carefully pry up the rubber glass seal on the driver's door from the lock side. The following will work for this: a small screwdriver, a nail file, a small piece of wire - in general, any thing that can be used to pry off this seal.

Pull out the glass seal, but not all of it - three to four centimeters of operational space will be enough.

As an opening tool, you can use rigid wire, a knitting needle, wire clothes hangers, or a welding electrode.

At the end of the wire, bend the hook at an angle of 450 and about 2 cm long.

Place the wire vertically into the opening between the door and the glass, hook down. After the wire rests against the lock, go around the lock and search for the mechanism for opening it: without releasing pressure, move the hook to the left, after the hook “falls” down, move it to the right.

Having felt the locking mechanism of the lock and hooked the hook onto the mechanism rod, open the lock.

At the end of the wire, bend something like a hook with a radius of about 1-2 centimeters.

Insert the wire vertically between the seal and the glass near the door handle with the hook pointing down. In some cases, you may need to pull out the edge of the rubber glass seal near the door lock.

Feel and hook the hook onto the door rod where the door lock button is located. Pull the wire upward until you hear the long-awaited click.

Method three

Bend down the top corner of the door.

This can be done by carefully driving a wooden wedge between the counter and the door with your hand (not a hammer!). You can bend the doors with two kitchen wooden spatulas, inserting them alternately into the door gap.

As a last resort, use a screwdriver or a small pry bar. The main thing is to remember to place a cloth under the spatula or pry bar so as not to scratch the paint. Instead of fabric, you can stick strips of electrical tape on the surface of the body.

Bend a hook at the end of a piece of wire. Through the gap formed after bending the door, insert the wire into the interior of the car.

Using the hook at the end of the wire, hook the lever that opens the door from the inside. Pull the wire and the door will open.

If your car has power windows, feel free to press the end of the wire on the control button.

The fourth way to open the car

Tie a loop in the middle of a thin, strong rope that is approximately the same size as the inside door lock button.

Grasp the opposite ends of the cord with your hands and pull it taut. Through the upper corner of the door, bring the string inside the cabin, moving your hands left and right.

If the gap between the door and the car pillar does not allow you to thread the rope inside, use fishing line instead of rope or bend the upper corner of the door in the previously described manner.

Continuing to move the rope in different directions, put the loop on the door lock button. Pull both ends of the cord up until the lock button releases the lock.

Fifth way to open the door

Use it if you couldn’t open the car door and you desperately need to drive. Using a hammer, a piece of metal pipe or a pry bar, break the side glass on the right rear door, remove the remaining glass, reach into the passenger compartment and open the door lock.

If you lose the ignition key along with the door lock key, you will also have to start the car without the ignition key.

A few words to those who decide to accuse us of writing a guide to hacking other people's machines.

Dear friends! It takes no more than 2-3 minutes to steal someone else's car. And all the methods we described require a significant investment of time.

Source: https://goodmaster.com.ua/avtomobil/kak-otkryt-mashinu-bez-klyucha.html

How to open a car without a key

There are situations when the car key is missing (stolen or lost) or is in the ignition and the doors are locked with the central locking. Don't panic. Opening a car door can be done in many ways, the main thing is to be focused and follow safety rules.

Break the glass. The method is simple, fast, but not at all economical. After all, inserting car glass is not a cheap pleasure. At the same time, the kicker himself can be injured.

Wooden wedge. For this method you will need a wooden wedge up to 25 cm long and 3-4 cm thick, as well as a metal rod with a hook at one end. Using a wedge, carefully bend the edge of the door at the top corner.

Carefully drive it with your fist between the frame and the car pillar, because it may damage the door seal and scratch the paint.

Insert a rod into the gap created by driving the wedge and use the hook to turn the blocker.

Wire hook. This method is applicable to all models of the domestic automotive industry. Bend a hook with a radius of 45 degrees from thin but stiff wire (70-80 cm). The length of the hook after bending is about 10 cm.

On the side of the door handle, you need to bend the seal and insert the wire. Try to feel and then engage the door rod on which the lock button is located. Having hooked the rod, pull the hook up.

The door must open.

Electric drill. This method is not always cost-effective, since as a result you will have to replace all door locks or use different keys, replacing only one.

Using an electric drill, you can drill out the core of the door lock (cylinder), then the door will open. Another key can be noticed by a metal blank, very similar in shape to it.

You can try using a flat screwdriver or nail scissors as a blank.

A piece of wire 1.5-2 meters long. This method is more suitable for imported cars, the principle of the locking system is that when the door handle is opened from the inside, the central locking is unlocked.

At the end of the wire, which will be inserted between the upper corner of the door and the stand, you need to make a small hook. As the wire penetrates deeper, it is necessary to make oscillatory movements in order to engage the inside door handle of the car.

A slight upward movement of the wire with the engaged handle opens the door.

Lace or rope. This method is suitable for cars whose internal locking button is located on the top of the door panel and has a protruding shape. In the middle of the lace or rope (1 m in size) make a loop that can be tightened. But don't drag it out.

Insert the hinge between the top corner and the post, slightly bending the corner of the door using improvised means. Alternately, lightly pulling the rope with the loop in one direction or the other, lower yourself to the level of the door lock and try to put the loop on the lock. Once dressed, tighten the loop and pull up.

Raising the button will open the locked door.

Specialist. This method - seeking help from qualified specialists - is very common. Even though calling a professional will cost you some money, it will cost much less than repairing a door that's bent or scratched or broken glass.

Masters have special tools and experience, which significantly increases the chances of success in opening a blocked door.

The main thing when you find yourself in such a situation is not to lose composure. Acquiring experience and skills in opening a car without a key is best done in your own car or in the presence of the owner.

After all, opening someone else's car without the knowledge of the owner of the car is criminally punishable.

Source: http://SovetClub.ru/kak-otkryt-mashinu-bez-klyucha

How to open a car without a key quickly and without straining too much?

Almost every car owner has encountered a banal situation: the doors are locked, and the car keys are in the cabin.

At the same time, the life-saving second set of keys, which, by the way, not everyone has, may be located at the other end of the city and there is no time for a long trip on public transport or to find a friend who will take you there and back. Don't panic - you can open a car door without keys.

The first way to open a car door without a key

How to open a car without a key? To do this, you need to “hack” it. Before you start “breaking” the lock of your car, you need to explain to the people who are currently nearby (working in nearby stores or other institutions) that you are trying to open your car.

This is due to the fact that vigilant citizens can call law enforcement officers when they see the actions that are taken to open a car without a key, even if you try to open a measly six in this way (VAZ 2106). At the same time, it is extremely difficult to explain to law enforcement officers that this is your car without having documents for it (as a rule, the documents also remain with the keys in the cabin).

After possible explanations, we proceed to the actual opening of the lock. To do this you need to do the following:

First, pry off part of the driver's door glass seal from the lock side. The easiest way to do this is to use any sharp object: a small screwdriver or a nail file.
Having hooked the seal, we pull it out. There is no need to pull out the entire glass seal; a few centimeters of operational space is enough.
To further carry out the work, we find a piece of wire that is long, equal to the length of the door. Next, at one end of the found wire we make a hook at an angle of 45 and about 2 centimeters long.
After completing the preparatory work, we proceed to opening the lock. We plant the formed hook in the opening between the door and the glass. After the wire has rested against an obstacle (in most cases this is a locking device mechanism), we perform a “bypass of the lock”, searching for a special mechanism to open the door. This is done as follows: without weakening the pressure on the wire when it rests against an obstacle, we move the hook to the right side until the moment it “fails.” After that we turn it to the right.
We find the locking mechanism of the lock, which without experience is done through numerous attempts. If this mechanism has been found, then hook it with a hook and pull the wire. The lock should open.

Recommended article: How to avoid falling asleep while driving during long journeys

For those who are still wondering how to open a car without a key on their own, we offer the second method:

Using a rope or fishing line to open a car without a key

You can also open a car lock without a key using a thin rope or fishing line (those guys who do tuning with their own hands definitely have these things). To do this you need to do the following:

At the end of the selected rope or fishing line we tie a loop, which should be the size of the internal door lock button.
We take the cord and, pulling the two ends, tighten it. In a taut state, we push the string through the upper corner of the door into the car.
We move the formed mechanism in different directions to put the loop on the lock lock button and pull it up.

It is worth noting that if the rope or fishing line cannot get through, then you need to bend the edge of the door. To do this, we hammer a wooden wedge by hand into the space formed between the counter and the door. If the space allows you to use a thin wire, then creating a kind of loop at its end, you can also get into the interior by pulling the lock lock.

Ways to open a car without a key

Home » To help the car enthusiast »

Motorists often encounter a very unpleasant situation - the alarm went off, the central locking locked all the doors, and the key remained in the ignition.

In this case, the driver cannot get into the car, and he does not know how to open the car without a key.

In the article we will look at how to get out of such a difficult situation, what are the ways to open car doors.

How to open a car door without a key

The most unpleasant moment occurs if the car engine remains running. But you shouldn’t panic; there is always a way out. You can open the car in the following ways:

using a hook made of hard wire;
by installing a wooden wedge and bending the door;
using a rope or cord, making a loop out of it;
breaking the door glass.

You can also use the services of on-call specialists - the masters have professional skills and will be able to unlock the car door in a short time, with minimal losses, and without damaging parts in the car.

Let's look at how to open a car door without a key using the VAZ-2110 as an example. First, we make a special master key from rigid wire, at the end of which we bend a hook.

Next we do this:

remove the lower outer door glass molding;
We take the wire, hook it down and insert it in the area of the outer door handle;
lower the device all the way down,
we feel for the door opening rod, pull the wire up;
The door drive opens the lock and the car is unlocked.

Now let's look at how you can open the driver's door on a Mazda 3 with electric windows if the engine is running:

to avoid scratching the paint, we seal the door pillars on the left side and a piece of the roof with tape;
take a wooden object (spoon), place it behind the upper right edge of the door, and carefully bend the door hardware. It is necessary that a gap forms between the door and the body;
insert a long piece of rigid wire (about 5 mm in diameter), you need to use the wire to press the window button so that the electric mechanism lowers the window.

The doors on some foreign cars are quite difficult to open, and if you cannot get into the car using the above method, there are only two options left:

break the side glass;
seek the help of professionals.

Unlocking doors on Audi/Volkswagen cars

On many Audi, Volkswagen and Skoda models, the opening and closing of the doors is controlled by the central locking; the locking is done using a radio key or by turning a regular key in the driver's door lock. If you insert the key into the lock and turn it, all the locks will lock at the same time.

The mechanical drive on radio-controlled cars is made as a safety net; if the battery in the key is dead, the door can be opened by turning the door cylinder in the lock.

Fraudsters use special master keys, but sometimes car owners themselves need to get into the car if the doors are suddenly locked by accident and the key is left inside. The tool consists of two parts:

blanks with a lever, which is inserted into the cylinder;
probe, using it to select the position at which the lock turns.

To rotate the central locking cylinder, you need to install a blank and use a probe to push four disks of the mechanism in the upper and lower positions. You should not press the lever too hard, otherwise the cylinder will rotate (the manufacturer provides protection against the mechanism collapsing).

After recessing the disks inside the cylinder, turn the lock 90 degrees with the lever and open the door.

How to open the door of a Volkswagen Passat B5 if the lock drive cable is broken

On a Volkswagen Passat B5, you can also open a door with a broken cable using a device with a bend at the end; you can use an awl or a bicycle spoke as a master key.

Here's how to open the door:

pull the lever of the outer handle and hold it;
we push the device inside the door handle (to the right side), turn the pin clockwise;
we push the “device” deeper, then use pliers to twist it right and left, trying to catch the position and catch on the lock opening drive;
Having found the desired position, open the door.

You may have to tinker for a long time, it is especially difficult to find the right position at first, then experience comes.

Unlocking doors on a car with power windows

If the car is equipped with mechanical windows, the door lock buttons on many car models are made in the form of a mushroom.

In order to open the door on such a car, you will need:

thick strong thread;
cord or fishing line.

We make a device - create a loop of thread in the middle of the cord. Then we put the thread through the door gap and put the loop on the mushroom button.

Having caught on the button, we pull the cord up; when it is lifted, the door lock is unlocked.

But the mechanical window button may be of a different shape, for example, like the one in the picture below.

Such a mechanism can be opened using a rigid wire, at the end of which we make a hook. The whole difficulty lies in pushing the wire through the doorway, the rest is a matter of technique.

Opening the door without a key Daewoo Nexia

If the car owner of a Daewoo Nexia has lost the key or left it inside the car, and the central locking has worked and closed, opening the car will not be difficult even for a non-professional - the car opens very simply, the protection against burglary is minimal. We use an ordinary school plastic ruler as a master key, then proceed as follows:

dismantle the lower outer glass seal and move it to the side;
take a ruler and insert it into the gap formed between the glass and the door. Place a ruler over the outside door handle;
we lower the ruler down, groping for the drive to open the handle, apply pressure;
Now all you have to do is pull the lever on the outside door handle, the door should open.

Break the side window to get into the car interior

There is another way to get into the car interior when the doors are blocked - breaking the door glass. Before breaking a window on a foreign car, you need to prepare a replacement part in advance. Car owners often break glass and then cannot find it:

the spare part is expensive;
The part is supplied only to order, and you have to wait more than one day for it.

You shouldn’t just hit a window with a brick; you need to take into account some points:

a brick or other heavy object should be wrapped in a rag to avoid injury;
you need to hit it carefully, as the side glass shatters into small fragments, and with a strong impact they fly far to the sides;
You should not break the rear windows - they are often more expensive than the front side windows, and besides, it is problematic to get into the car interior through them.

In some cases, breaking glass is cheaper and easier, especially on cars with serious protection against entry into the car. For example, replacing all door locks can cost more than 15-20 thousand rubles; a non-original front glass on a budget foreign car costs on average about 2 thousand rubles.

How to open a car without a key: video

Source: https://avtobrands.ru/sposoby-otkrytiya-avtomobilya-bez-klyucha/

How to open a car without a key, TOP 3 proven methods

The experience of car thieves once again proves that you can get into someone else's car without a key. However, such methods also play a significant role for good when the unfortunate driver accidentally forgets the keys in the car, and the door slams shut without being able to open it from the outside. In this case, we have prepared a number of tips on how to open a car without a key.

The first method is hacking

Quite a dangerous method, which is associated with the vigilance of people around. The problem is that a law-abiding citizen who sees this picture can easily call the police and prove to them that there is no crime - it will be very difficult. Therefore, be prepared for a disapproving look and keep the car documents with you.

As for the Soviet “classics”, everything is extremely simple. These cars have locks on the windows, which are secured using powerful glue. It turns out the glue isn't that good after all.

Buy an autogen lighter at your nearest store and start heating the lock from the outside of the glass. After some time, the glue melts and the lock falls off. Thus, nothing is holding the window anymore, which means you can stick your hand in and lift the lock latch.

In the future, to attach such a lock, it is necessary to use a special piece of sheet metal with a bent end.

If you do not own a VAZ car, then there is another way for you to open the car without a key. To do this, you need to pull out the seal on the bottom of the glass, which prevents moisture from getting under the glass.

There is no need to take it out entirely, just a few centimeters is enough, because putting it back later is not a pleasant task . Now find a stiff wire whose length is equal to the length of the door. Make a hook at one end, 2 centimeters long and at an angle of 45 degrees.

The rigidity of the wire is very important, since metal that is too soft will not do its job well.

Next, lower this hook into the opening obtained after dismantling the seal, and “look” for the rod of the locking mechanism. This may not work right away, but after repeated attempts, you will be able to open the lock with one easy upward movement. This way, the latch will rise and you can get into the car without a key.

The second method is rope or fishing line

This option was well distributed among VAZ 2108-99 and 2110-12 cars. The fact is that they do not have windows, and the seals fit too tightly.

Therefore, you can open such a door using a regular rope. Make a loop in the middle, the size of which corresponds to the size of the inner latch.

It is very important that when tensioning the loop does not narrow, otherwise all efforts will be in vain.

If necessary, bend the upper corner of the door using a wooden wedge and thread a rope with a loop there. By moving in different directions, push the rope further until it seems flush with the latch. Now the most difficult part is to put the loop on the locking device. It’s possible to do this, but you’ll have to try hard before doing it.

As soon as the loop is in place, you need to pull it up so that it does not come off the latch . To do this, it is best to raise one end of the rope higher to create a distortion. Once the lock is released, the rope can just as easily be pulled out the same way you put it there.

The third method is a tennis ball

Another little-known method of opening a lock without a key. To do this, you will need a regular tennis ball with a small hole in it .

Lean it against the lock so that the hole is at the level of the keyhole and, with sharp pressure, direct the air stream inside.

This trick only works on locks with a flag type of locking, so you definitely won’t be able to open another car this way.

These are, perhaps, all the effective ways to open a car without a key. Before you break glass or call your friends to bring you a duplicate, try all of the above. Breaking glass is the last thing you should do. We wish you good luck on the roads!

Source: https://365drive.ru/sovety-avtolyubitelyam/kak-otkryt-mashinu-bez-klyucha-video-otkryt-dver-v-moskve.html

How to open a locked car?

Just recently I returned from vacation, where I spent almost three weeks. All this time my car stood quietly in the garage. In a few days I had to go to work. It’s good that I decided to prepare the car in advance.

By using:

Pads.
Generator.
Rulers.
A few more ways.

Even before pressing the button on the key fob, I noticed that the alarm light was not blinking. I thought I had burned out, although this shouldn’t have happened, because I have a new alarm system.

Having made repeated and unsuccessful attempts to get into the car, I realized that the reason was the battery, which had simply died. Moreover, it sat down in such a way that its charge is not enough even for the alarm.

I simply could not imagine how to open a car without a key.

The idea immediately arose of calling a service to open locks, however, when they told me the cost of services over the phone, I immediately discarded this idea. I had to sit down at the computer and spend several hours searching for information. As a result, I have identified for myself several effective methods with which you can open a car door:

use a special pneumatic pad;
connect to the generator;
use a ruler.

I personally tested each method on my car and now offer it to you.

pad

The cost of this device is tens of times less than the cost of the services of security guards. In the store, such a pillow costs only a few hundred rubles. With its help, you can release the door or hood if the battery is completely dead.

What exactly did I do:

I stuck the pad into the gap between the body and the hood.
Using a bulb, I pumped it up with air.
I inserted a long and thick wire into the resulting gap, to which I applied the “plus” from a spare working battery. I secured the “minus” on the wheel rim.
I reached with the wire to the positive battery system and pressed the button on the key fob.

Voila! The door opened as if by magic. No scratches, chips or bent metal. Everything is neat and fast.

Generator

I also tried this method, although compared to a pillow it is quite labor-intensive and not very convenient. But if suddenly you have absolutely no other devices at hand, then this method will help you get into the interior of your car.

If the battery is dead, you can open the car using a generator. In this case, you will need another working battery. I will describe the whole process in order:

The first thing to do is remove the engine protection.
Having reached the generator, we find a “positive” bolt on it.
We connect two wires with a cross-section of 2 sq. mm with alligator clips.
To the “positive” terminal of the generator we connect the “positive” cable, which is connected to the battery.
We connect the negative cable to the body.

As a result, the alarm turns on and you can open the car with the key. Using this method, the most important thing is not to mix up the contacts on the generator. Otherwise, instead of an open door, you may get a short circuit.

Ruler

You can open the car with a ruler. If you have absolutely no improvised means with you except a metal ruler, then you don’t have to worry. With its help you can quite easily open the car door. To do this, follow these steps:

Lift the side seal near the door lock
Insert a ruler into the gap formed between the glass and the door.
Press it on the rod that is responsible for raising the flag

This method is suitable for domestic cars and many foreign cars. Most modern cars are equipped with a complex and reliable door mechanism, against which a simple metal ruler may be powerless.

A few more tips

There are some other ways to help open a locked car. If the car window is lowered, you can use a wire. Make a loop at the end that you can use to hook the inside handle and open the door.

If you need to pull the handle to the side to open the doors of your car, use a piece of wood. In this case, you will have to press down on the handle. By the way, if you don’t have any wire on hand, you can use the windshield wiper. The only thing you need to do is remove the knitting needle from it.

As you can see, there is nothing complicated.
It is enough just not to panic, but to collect your thoughts and apply one of the methods. I advise you to carefully remember at least some of the above methods. Who knows what situation you might find yourself in. Be sure to watch the video on how to open a car without a key. This way you will be prepared for any surprises. Return to top

Source: http://DaciaClubmd.ru/kak-otkryt-mashinu-bez-klyucha/

Opening a car without a key?

There are several ways to get in, but each one works on occasion.

These recommendations are not a guide to breaking into and stealing vehicles.

Services of “specialists”

Take advantage of special services from companies. They are easy to find on the Internet, but for such work you will have to pay a tidy sum of money. And not everyone will trust such people. If they opened it in front of you, they will open it without you.

The Rough Way

This option is not very humane and requires subsequent financial investments. Almost every car has a small window; if you break it, you can stick your hand in and press the lock button. This is perhaps the most unpleasant and expensive method, since the price for replacing a window can vary depending on the brand of car. But if the situation is urgent, then this is as a backup option.

Tricky way

The most common and cheapest of the above. To do this, you will need a strong, thin rope or steel wire and a flat-head screwdriver.

And also a lot of patience and ingenuity.

The essence of the “opening” operation is to insert a rope or wire with a tightening loop through the seals or glass inside, and then hook and pull out the lock button.

When the door slams and the keys are left inside

There are two options to insert the rope or wire inside:

Try to lower the glass with your palms. You need to try on each door, at least a few millimeters will be enough. But as practice shows, it is not easy enough to lower the window on every car.
A more convenient option is to take a screwdriver or something flat that will not damage the body coating. Then use the object to press the door (usually the upper corner of the door is pressed). And insert the prepared rope (wire) through the gap that appears.

So, you have a rope or wire. Make a drawstring loop and then slide the loop through. This must be done so that the loop can be placed over the button.

As soon as you manage to put a loop on the button, you will need to tighten it and then pull it out at both ends of the rope (wire).

A man “opens” a car with a wire

This is where a difficulty may arise: not all machines have a cap on the button, and this makes the task of “opening” a little more difficult.

If you succeed in the whole operation the first time, then you are a great fellow, and if not, try again and again!