How to remove tint

How to remove old tint correctly?

How to remove tint

The question of removing tinting from windows arises quite often among owners of tinted cars. There are quite a few reasons why you have to do this: the old film can fade, get scratched, its edges can come off, or simply after buying a car you realize that the tint is very dark or you are simply tired of paying fines to traffic police inspectors.

Important subtleties

Removing rear tint

If you are wondering how to remove old tint yourself in the shortest possible time, you need to prepare for the fact that this is not the most pleasant undertaking, requiring time and determination. Knowing some simple secrets will allow you to cope with the task very quickly.

The old film sometimes peels off from the surface of the glass around the perimeter, which becomes very annoying, and the driver has a problem with removing the tint. You may think that if the film begins to peel off on its own, you can easily remove it from the entire area, but this is not so.

The film may come off in fragments, and the closer you move to the center, the stronger the adhesion will be.

If the film is peelable even a little, you can remove it by peeling away the edges for easy grip with your fingers. A sharp downward movement will allow you to clean the glass very quickly.

You've probably seen this trick in videos online, when traffic police officers removed tinting films that did not meet the standards.

Remains of glue can be carefully removed with a rag with soapy water or solvent.

to contents ↑

How to remove tint with detergent?

Video: Removing tint, removing glue residue

If the quick method of removing the tint film does not work, you can resort to the classic, more popular options. You need to first prepare the necessary materials and tools:

straight razor blade and holder for it;
rag and sponge;
glass cleaner or Fairy detergent solution.

When performing work, you need to press the cutting edge of the blade at an acute angle to the glass, as if cutting off a layer of film, but without violating the integrity. When any part of the tint is removed, pull it off by the peeled piece, and generously moisten the gluing area with glass cleaner or a solution of a detergent composition. After removing the film, the glass will remain almost clean.

to contents ↑

Removing old tint using a hair dryer

Removing tint using a hair dryer

If you have a hair dryer among the tools in your garage, you can solve the problem of removing the film in a matter of minutes. To work you will need an assistant. Many motorists probably noticed in the summer that when the car got very hot, it was easier to remove the film. You can use the properties of glue, which softens under the influence of high temperatures.

Using a hair dryer, heat the outer surface of the glass to 40-70 degrees Celsius. Do not overheat the glass, otherwise it may even burst or the film will melt. One person should warm the glass, and the other should carefully remove the film. If you do everything correctly, the film will come off easily and without traces.

to contents ↑

Useful tips for removing film

Old tinting

You can independently remove the film from the rear window of the car by heating the surface, since the solvent and scraper can damage the filaments of the heating system. Perform the operation as carefully as possible, heating the glass evenly over a large area.

Another subtlety that you should know is that the adhesive for films is based on silicone, which dissolves well in warm soapy solutions, and not in solvents. You should not work with solvent at all, as it can damage the interior trim, plastic parts and even harm your health.

Source: http://avtozvuk.info/kak-snyat-staruyu-tonirovku-svoimi-rukami.html

3 Ways to Remove Tint Films from Car Window

Car window tinting is a rather complex technological process in which the windows are darkened with a special tinting film or sprayed or simply inserted colored glass. Many car enthusiasts are wondering how to remove old tinting from a car window and how to apply a new one using improvised means. Therefore, we will try to help them figure out how this is done.

Let's consider the following questions:

Reasons for removing film

Peeling off the tint film is a very labor-intensive process that needs to be approached no less seriously than gluing it. So the removal methods will largely depend on the reason why you need to remove the old tint. Because a relatively freshly applied film is much easier to remove than an old one. And so let’s get acquainted with the most common reasons for its removal.

Reasons for removing film:

If you notice that the film has begun to fade, peel off, or some defects have formed , for example, air bubbles, or it has simply changed its color , then it is clear that there is no point in leaving it on the glass, because it has already lost its functions anyway and the appearance too. Basically, a change in color can occur when using non-metallic dyes in tinting, and the appearance of bubbles, in turn, is due to poor adhesion of the tinting to the window or poor-quality glue.
If after purchasing a car you find that the film is too dark, then it also needs to be changed, since it may not meet the standards. The traffic rules state that glass tinting is allowed only within permissible standards, that is, the light transmittance of the windshield should not be lower than 75% , for all other glasses the lower limit is 70%. In addition, there may be a light-protecting strip no more than 15 centimeters wide on the windshield . If you are stopped on the road by traffic police officers and notice this violation, then you cannot avoid the corresponding sanctions in the form of a fine.
Also, removing the tint is necessary if a chip or crack appears on the glass and you are going to fix it to prevent it from spreading further.

What are the methods for removing tint?

Of course, ideally, in order not to bother with removing the film, you can use a special service at a car service center. But the price has recently risen to the point of impossibility, so it’s easier to do everything yourself.

Many car enthusiasts mistakenly think that it is very easy to remove the film on their own, and they are very mistaken. Because in order to do this efficiently, you need to know several important points, which will be discussed further.

Therefore, let's look at ways to remove tint film:

Using heating with an industrial hair dryer or steam generator.
No heating with soapy water.
Using ammonia.

You can use any of these methods to remove film from your car windows.

The manufacturer of the tinting films also plays a very important role. Opinions differ about Chinese tinting; some say that it doesn’t come off well, while others say it doesn’t last at all.

For example, according to consumer reviews, the quality of Chinese film is much worse than that of other manufacturers.

Therefore, to the question of how to remove old Chinese tinting, the answer is obvious, it is much more difficult, longer in time and more fuss than with a regular one, especially if it is also ancient. In all other respects, you need to act according to the generally accepted algorithm.

Removing tint using heat

How can you remove old tint, you ask.

In order to remove the old tint film, you must first prepare the necessary tools, such as: an industrial or household hair dryer , although for heating you can also use a steam generator or other household appliances that can emit heat (in some cases they even manage to heat with an iron).

When using an industrial hair dryer, it is advisable not to overdo it so that the glass does not burst or deform, and the tint film does not melt .

Removal using an industrial hair dryer

Removal using a steam generator

Precautionary measures must be taken when heating the film because later it cannot be removed so easily; you will have to scrape it off. Also, for safety reasons, we recommend removing all decorative elements.

With the help of a steam generator, the film can be removed much faster and with better quality , because hot steam is supplied to the nozzle under pressure. This allows you to not only remove the film, but also the adhesive layer.

It should be noted that although this method is quite effective, it is not safe, since the steam generator operates at a very high temperature , which can threaten not only the glass, but also one’s own health.

Next, we will present more detailed instructions for removing the film using a hair dryer:

First of all, you need to warm the film thoroughly so that it comes off the glass without much effort without leaving a layer of glue, although if it remains, it doesn’t matter, then it can be removed additionally, the main thing is that the film is peeled off with a blade.
Important! While the hair dryer is operating, you need to ensure that hot air does not hit the rubber and plastic parts of the interior, so as not to damage them.

Self-removal of tinting from car glass
The second important point when removing is the temperature regime, it should not be different, because a temperature difference can negatively affect the glass , as a result it will begin to crack, so it is better to carry out such work in the warm season. Experts recommend heating the glass to 40˚C ; it is at this temperature that the glue will become soft and the film will not melt.
After warming up, you need to carefully pry the film around the edges with a knife, trying to remove it in this way; you need to act slowly, because glue particles may remain on the glass, which will subsequently need to be washed with detergents.

To understand more clearly how to remove old tint, you can watch the video instructions below.

Removing tint without heating

The question of how to remove old tint without a hair dryer is asked by those car enthusiasts who do not have such a tool. And their first mistake is the very idea that if the edges of the film have peeled off, then it will be much easier to remove it than in the opposite case.

Sometimes the simplest thing you can do is simply pull on the protruding part of the tint, which will subsequently simply come off and leave no pieces of film behind for further removal, which will mean that the material that held it on the glass has simply dried out. To prevent this from happening, use dishwashing detergents , because they are probably found in every home. Also, in addition to the detergent, you will need a small sponge or rag; you need to use it to wipe away stains on the glass; you also need a blade or scraper to pry off the film.

Detinting glass using ammonia

By using such a harmful substance as ammonia, you can easily cope with removing tinting in any condition, both old cracked and still in good condition, on the side window or stuck on the rear window with heating threads. This method of tinting the rear window using ammonia is often used by Americans, since it is the most reliable and can cope with the persistent adhesive of the highest quality tinting films.

Here's what you need for this:

The surface must first be moistened with a soap solution, then with ammonia.
Then you need to attach a small part of a plastic bag to it to collect garbage, onto which you also need to apply ammonia from a spray bottle. It is recommended to work in a respirator.
Apply the same piece of polyethylene to the inside of the glass. After which you need to leave everything for a while to wait until the heat of the sun’s rays warms up the polyethylene. Under the influence of heat and ammonia, the film will begin to deform and peel off from the glass.
Next, all that remains is to simply remove the film along with the plastic bag.

The disadvantage of this method is that it can only be used in sunny weather. As a rule, after removing the film, glue remains on the glass; it needs to be cleaned additionally, for example, using a soap solution and a blade. After all operations performed, it is advisable to wipe everything thoroughly with a napkin.

How to remove tinting from a rear window without damaging the heating

Removing the tint film on the side windows is much easier and faster than doing it on the rear, especially if it is heated. Therefore, we will pay special attention and tell you about the nuances of how to remove the tinting film from the rear window without damaging the heating, interior trim and decorative panels. Let's reveal a few tricks.

In most cases, rear windows are heated in the form of special thin threads. So when removing the film from the glass, there is no need to make sudden movements , because the heating elements can be damaged.

Only heating and using a soap (alkaline) solution to avoid negative consequences when removing the film . Therefore, if you don’t have a hairdryer, just turn on the glass heating .

Under the influence of heat, the glue will become softer and can be easily removed from the glass without damaging the heating filaments.

It is allowed to heat the glass with a hairdryer at temperatures above 0 degrees, otherwise it may burst. Therefore, it is not recommended to remove tinting in winter.

Another simple and reliable method to get rid of tinting on heated glass is to use the ammonia removal method (described above). Or even ordinary soapy water using cling film. But spraying water and gluing the film on top will delay the removal of the tint for a couple of days (this is exactly how long it takes for the water to penetrate behind the film and for it to come off).

As you can see, everything can be done with your own hands, if only you are attentive and careful with your vehicle. If you carry out all the actions strictly according to the instructions, then you will not damage anything in the car, but if this process still seems difficult for you, then it is better to turn to professionals, but then you will have to spend 2 - 3 thousand rubles.

How to remove remaining glue from glass

If you made some mistakes when removing the film, a sticky layer of glue may remain on the glass. To cope with it yourself, you need to try very hard.

It is strictly not recommended to remove the glue with a blade, because you can damage the glass; for this, use a spatula (spatula).

Therefore, next we will look at the instructions for removing the glue. To easily deal with glue residue on the glass surface after removing the tint, you need to know some important points :

Water . With its help, you can soak the remaining glue, but if it sticks very well, then water may not help in this case.
Solvents . This is a pretty good method, but quite dangerous. You should not use substances with high concentrations, for example, acetone, it is very aggressive to glass surfaces.
Gasoline . Before applying to glass where glue remains, it should be diluted with water. Also, be careful not to create rainbow stains.
Alcohol . The best of all methods and not so dangerous. It copes well with the adhesive surface and removes excess without harming the glass.
Ammonia . Copes very well with repair (construction) glue. Removes tint along with glue, but you need to be careful and protect other surfaces of the car from ammonia. After removal, you need to wipe the glass well with alcohol.

Thus, you can remove the remaining glue from the glass after removing the tint film using a spatula, but before doing this, you must wet the areas with remaining glue with soap or another solution from the list presented.

Few people know, but glue residues, both from tinting and other stickers, can be easily removed with universal lubricant WD-40.

As you can see, the procedure for removing tint is not a simple procedure, so if the darkening of the film on the windows of your car is within acceptable limits and you would not like to regularly remove it for re-sticking, then we recommend following a few tips.

How to care for tinted car windows

If you want the tint to serve you for a long time, then you need to follow some recommendations for its care.:

not recommended to leave the car windows open for 5 days after tinting the windows .
no need to wash the inside of the glass for up to 3 weeks after gluing the film; this is done so that the adhesive layer sticks well to the glass.
Try not to touch the edges of the film on the glass so as not to damage them, so that later it does not start to peel off.
After each wash, it is imperative to wipe the glass without leaving any water.
When washing glass, do not use brushes to avoid damaging the tint.
Do not use special detergents that contain ammonia .
You can clean the film with any product suitable for hand washing only in the ratio of 30 grams of product per 1 liter of water.

Caring for tinted glass is simply necessary; if you do not pay special attention to this, your film will quickly become unusable and, as a result, it will need to be replaced, which will negatively affect your budget and nerve cells.

As you can see, the methods for removing tint films from car windows are quite different. And removing a tint film is no different from removing PVC film on a body.

Therefore, in order not to harm your car, you need to be extremely careful when removing them.

Also, when buying a film, you should pay attention not only to the cost, but also to its quality, because the service life and the difficulty of removing the tint will then depend on it.

Did not find an answer to your question?

Ask in the comments. We will definitely answer!

Source: https://etlib.ru/blog/609-kak-snyat-staruyu-tonirovku

How to remove tinting from glass yourself? Tool, methods

Car tinting is a great way to not only protect the interior from prying eyes and summer sun rays, but also give it a more stylish look. Alas, recent changes in the legislation of the Russian Federation have forced domestic drivers to seriously think about how to remove tinting from glass themselves.

This skill will help eliminate troubles during inspection by traffic police officers. If the inspection takes you by surprise, knowing the sequence of the process will protect you from a fine or confiscation of license plates.

Over time, the film fades, peels, scratches and bubbles. You don't have to pay for specialist services if you know how to remove old tint. You can update the look of your car yourself or change the light transmission of the film. The procedure is simple, but requires care and suitable tools.

The right tool

Before you remove the tint yourself, make sure you have the necessary tools. Depending on the method, for removal you will need:

hair dryer to soften the adhesive;
sharp blade, rubber scraper;
soap solution (any detergent);
sprayer or sponge for applying cleaner;
fabric to absorb excess moisture and remove glue residue.

Technology

There are two effective ways to detonate a car:

the film needs to be heated;
without heating.

How to remove tinting from glass is up to you. Each method has its own advantages. In many ways, the “smoothness” of the process will depend on the quality of the material and compliance with the tinting technology.

Removal with surface heating

using a hairdryer, heat one of the upper edges of the film to 40º (the glue no longer holds at this temperature, and the film does not melt yet);
carefully pry it off with a blade;
Gradually moving the heating zone, slowly pull the film. To avoid tearing the film, move smoothly, maximizing the capture area;
Remove any remaining adhesive with a sponge and detergent or solvent.

It is best to remove tinting using this method in tandem with an assistant.

Removing tint without heat

Using a sharp tool, carefully pry off the film at the top edge;
Apply a detergent solution to the junction of the film and glass;
use a rubber or plastic scraper to separate the tint film, constantly wetting the surface of the glass;
Remaining glue is removed with acetone or glass cleaner.

A scraper will greatly simplify the procedure

On some cars, to completely remove the film, you need to remove the interior trim and the glass seal. If poor quality materials were used to tint your car, you will not be able to remove the film using conventional methods. Apply a soap solution to the glass and scrape off the tint layer by layer with a sharp blade. A similar method is suitable for removing the adhesive base with good adhesion.

Nuances and features

Even if you think you know how to remove tinting from glass, pay special attention to the following points:

During the frosty season, be extremely careful when using the heated surface method. Before starting work, let the car sit in a warm box. A sudden change in temperature can cause the glass to crack. Increase the temperature gradually. There is no need to rush here;
monitor the temperature. The melted film will have to be scraped off by force with a sharp object, risking scratching the glass;
Do not direct a stream of hot air at the plastic elements of the car for a long time. They may become deformed;
It is best to use an industrial hair dryer, since removing old tint using a household product or steamer will be much more difficult;
Cover the bottom of the glass with a cloth that will absorb excess soap solution. Do not allow acetone or solvent to come into contact with the car door trim;
When scraping off tinting or glue residue, constantly wet the surface with soapy water. The blade should only move at an acute angle in relation to the surface. This will reduce the risk of scratches on the glass.
When working with sharp blades, take all precautions.

Heated glass

Particular attention should be paid to glass with a heating function. A local break in the conductive paths will lead to disruption of the system. Removing tinting from this type of glass requires extreme caution.

If the film is difficult to remove and you have to scrape it off, be prepared to subsequently restore the heating filaments. Fortunately, the range of conductive repair compounds is large, and the restoration procedure is simple.

For greater clarity on how to remove tint yourself, watch a training video from a specialist. Compliance with the methodology and careful execution will help you save money and get pleasure from car repairs.

Source: http://AutoLirika.ru/soveti/kak-samostoyatelno-snyat-tonirovku.html

How and with what to remove tinting from a car window and quickly remove the glue?

Content:

Given the tightening requirements for the light transmittance of tinting films, especially for windshields, front windows and lighting fixtures, some users need to remove them. In addition, the old film must be removed in case of replacement. This article discusses how to remove tinting from car glass and headlights yourself at home in two ways.

The service in question is offered in car repair shops, however, after the introduction of more stringent requirements for the light transmittance of car tint films, the cost for removing this material has increased slightly. These same requirements have forced many users to get rid of tinted windows, especially the windshield, front side windows and headlights. Therefore, in order to save money, they began to carry out this work themselves.

Many people removed the tint film in the simplest way, that is, they picked up the edge of the material with a sharp object and pulled it off. However, after this, fragments of film and glue remain on the glass.

To completely clean your car glass, you can use any of the technologies described below: material removal with or without heating.

Visual lessons on removing tint film can be found on the Internet in video format.

To remove film from glass and car headlights this way yourself, you need to get some tools.

First of all, you will need an industrial hair dryer, although similar devices are also suitable, for example, you can use a household hair dryer or steamer. In addition, you will need a small amount of water and a few rags.

In addition, it is advisable to find an assistant to carry out the work in question, as this will speed up and simplify their implementation.

Tuning begins with one of the performers using an industrial hairdryer or other similar tool to heat the car glass. Some people recommend starting heating from the rear side windows. When processing car glass from the interior side, you must not allow hot air to act on rubber and plastic parts for a long time.

The heating temperature should not exceed 40°C, since this value is enough for the glue to melt, and higher heating can lead to melting of the tint.

When processing glass, the hairdryer should be held at a distance of up to 5 cm from the working surface for about a minute over one area of the glass.

After heating the film fragment, the second performer pulls off the resulting softened material, rolling it into a tube so that it does not stick back.

To do this, use a knife or some similar sharp object to pry up its edge and slowly pull the material.

At the same time, it is important not to exert much force and not to try to peel off the film quickly, as this may lead to its rupture, and the material will have to be pryed off again, or the glue will remain on the surface of the glass or headlights. If, after removing the film, there is glue left on the work surface, you need to wipe it immediately, since heated glue can be easily removed even with a rag.

The first stage of this technology for removing tinting from car glass and headlights is identical to the second stage of the method discussed above, that is, the work begins by immediately lifting the film with a sharp object and pulling it off the car window. Immediately after this, the glass, cleared of material, is poured with detergent and treated with a rubber scraper.

During these works, glue and tinting residues are removed from its surface. The scraper is processed from top to bottom across the entire width of the glass. If after such cleaning there is still glue on the glass, then you should apply glass cleaner GT 154 to it. The glue is also quickly dissolved with acetone and solvent 646. After cleaning, wipe the glass dry with a soft rag.

Before applying detergents, it is advisable to place rags over the door seals to prevent liquid from getting under the casing, which can lead to a short circuit in the wiring and damage to the metal by corrosion. In addition, this will preserve the elasticity and resilience of the seals.

Separately, you should consider how to remove tinting from the rear window of a car yourself. The fact is that its tinting requires taking into account some nuances.

As when removing film from other glasses, it is important not to damage it and adjacent elements of the interior and body.

But besides this, you need to take into account that in many cars the rear window is equipped with heating in the form of threads, and there is also an antenna strip running through it, so in the process of dismantling the tinting material, damage to these elements is possible.

This will soften the glue, allowing you to carefully remove the material without damaging the heating filament and antenna strip. In case of damage, you can purchase such strips in liquid form.

So, from the information presented above, it is clear that tinting the windows and lighting fixtures of a car is very simple and quick to do with your own hands, so many users can do it.

To successfully carry out these works, you must follow the given sequence of the chosen method of removing material, be careful with the glass and the elements of the body and interior of the car adjacent to them and located near the headlights.

There is no need to put in excessive effort or rush. To see the implementation of the considered work visually, you can watch the video.

This article shows only two main ways to remove tint; in fact, there are many more. Other methods can also be found on the Internet. In any case, if the described methods seem difficult to remove the tint with your own hands in accordance with them, you don’t have to do it at home, but contact a service.

Source: http://AutoKuz.ru/tonirovka/kak-snyat-tonirovku-so-stekla.html

Do-it-yourself tint removal

Recently, due to the tightening of measures to combat tinting that does not comply with current standards, the question of how to remove tinting has become relevant. However, even if there are no complaints about tinting from traffic police officers, there are many other reasons why the existing tinting becomes objectionable.

Sooner or later, car enthusiasts are faced with the task of how to remove tint. You may not like the color when you bought the car, or the tint may have been damaged during use, and the car has acquired a sloppy appearance.

Especially often the dilemma arises of how to remove old tint, since time can change the best quality product.

In this case, it is quite possible to remove the tint yourself, it will just take a little more time and care in carrying out your plan.

The easiest way to get rid of tint film is to go to a car service center.

But, although dismantling the film requires time and endurance, the process is not difficult from a technical point of view and anyone can remove the tint on their own.

Read also: Ground clearance of Toyota Corolla cars

Moreover, with the increase in demand for tinting removal, car services have raised prices. So, figuring out how to remove window tint can save you a fair amount of money.

How to remove tint quickly?

The easiest way to remove tint when you need to do the operation quickly is to follow these steps.

You need to lower the glass a little and pry the tint off the top edge with a sharp object. Then grab the edge of the film and gently pull it down until it is completely dismantled.
The process becomes more complicated when the film begins to tear in fragments, and you have to repeat the operation again, starting with prying off the film.

The film breaks due to the fact that adhesion is stronger in the center than along the perimeter. The advantages of the method include a minimal set of tools for dismantling and speed of operation. This method is acceptable, for example, on the side of the road to dismantle the film at the request of a traffic police officer or near a traffic police post if legal claims are undesirable.

Such film removal is used only in emergency situations, since the glue almost completely remains on the glass and must be removed additionally. Residual adhesive can be removed by washing with soapy water, window cleaner, or wiping with a cloth soaked in solvent.

Removing tint using soap solution

You can remove film from car windows using a soap solution. Any type of soap solution is used, from dishwashing detergent to special shampoos for washing cars. The prepared solution is poured into a spray bottle and sprayed over the surface of the film.

It is recommended not to skimp on soapy water, but to generously moisten the surface with it. After which the film is picked up from the top edge and pulled down.

The dismantling process will go more smoothly if you apply a newspaper to the wetted surface and wet it periodically for about an hour, and only then tear off the film.

Detonation with ammonia

Auto glass tinting is done in the following way.

The surface is wetted with a soap solution.
Then a part of a plastic bag for collecting garbage is applied to it, onto which ammonia is applied from a spray bottle. Work must be done in a respirator.
The same piece of polyethylene is applied to the inside of the glass. It is necessary to wait until the sun heats up the polyethylene so that, under the influence of ammonia, the film begins to deform and peel off from the glass.
Then the film is dismantled along with the plastic bag.

The disadvantage of this method is that it can only be used in sunny weather.

The film is not removed cleanly; a certain amount of glue remains on the glass, and it should be cleaned off additionally. A soap solution is applied to the glass, and the glue is scraped off using a sharp object. The operation should be performed carefully so as not to scratch the glass. Remove the tint by washing the glass and thoroughly wiping it with a textile napkin.

Removing tint using a hair dryer

The most effective way to remove tint yourself is with an industrial hair dryer, but a household hair dryer will do. The method is based on the property of silicone glue to soften under the influence of heat. Many car enthusiasts have noticed that in warm weather it is much easier to tint a car than on other days.

The surface is heated with a hairdryer from the interior side.
It is preferable for two people to carry out the work. One will heat the glass on the side of the car, and the other will simultaneously remove the film.
The temperature of the air blown from the hair dryer should be no more than 40 degrees to avoid damage to the glass, which may burst, and plastic parts of the car interior.
Ideally, the film is removed in one piece; if the film breaks as a result of work, then it is necessary to reheat this area and remove it.
During detonation, you need to remove the seals, and some car models require the removal of door cards.

Removing the film from the rear window

Attention should be paid to the question of how to remove tinting from the rear window, since the process must be particularly careful and thorough in execution.

The rear window is equipped with heating filaments, which may become damaged when the film is removed. The heating method with a hairdryer is the most preferable in this case.

It is unacceptable to use solvents to clean glass from glue; a soap solution is best.

Removing old tint

Removing tinting that's been in place for many years is more difficult than removing tinting that was installed a year or two ago. The approach to the case should be characterized by special care and a gentle removal regime. It is advisable to use the heating method.

Source: http://KrasimTachky.ru/tuning/tonirovka/kak-snyat-tonirovku-samostoyatelno.html

How to remove tint from a car yourself and correctly

Thank you for your help in creating the material from tinting specialists automania-group.ru

The question “how to remove tinting from windows” usually arises after a meeting with traffic police officers. Requirements for tinting are constantly becoming more stringent, and if you used to see cars tinted “in black” often, now it is much less common.

Why do you have to film?

At the beginning of 2018, according to Article 12.5 of Part 3.1 of the Administrative Code, the penalty for tinting is 500 rubles.

You will have to remove the tint if the light transmittance of the windshield is less than 75%, and the front side windows are less than 70%.

The law does not impose any requirements for the transparency of rear windows, the main thing is that the tinting is not mirror-like.

The same requirements apply to the strip on the windshield, and its width should not exceed 14 cm. Measurements are taken from the outside, from the top edge of the glass, at any point.

Traffic police officers are fighting against people who are not afraid of a fine of 500 rubles. Now, along with the fine, they issue an order that has a number of nuances.

The fact is that excessive tinting is considered an administrative offense. The document does not require removing the tint as such, but requires stopping the offense within a specified period.

Mechanical tint removal

Most often, drivers remove tinting themselves in this way.

The glass lowers a little, after which you need to carefully pry off the edge of the film with any sharp object (stationery knife, blade).

When you can already grab hold of the peeled edges with your hands, you need to pull the film down. It is best to do this slowly, avoiding jerks and controlling how the tint separates from the glass.

This way you can remove the film in one piece. If the film breaks, you need to use a sharp object again. Be careful not to scratch the glass.

This removal method is relevant for tinting that was applied relatively recently.

Thermal removal

Thermal removal involves heating the tint film. This is more effective because when heated it separates much more easily.

We will need a construction hair dryer; if we don’t have one, we can borrow a household hair dryer from our wife/sister. Some recommend removing the rubber seals before heating, although the temperature is not very high (40-50 degrees), so it should not have a negative effect on the rubber.

The glass is heated evenly on both sides, first from the outside, then from the inside. After this, we pry up the edge and also gently pull it down, continuing to warm it up. Those places where the tint holds especially tightly should be heated additionally.

Be sure to read

Double glazing

Thermal removal can be done using a steam generator. In this case, you need to be extremely careful and wear gloves to avoid getting burned. Otherwise, the procedure is no different from the one when we used a hairdryer.

Removal without heating

The adhesive used to attach the tint to the glass is usually made with a silicone base, which dissolves well with soap and dishwashing detergents.

The thick solution is poured into a spray bottle and generously applied to the glass, on the side where the tint film is glued. You need to apply several times, and it is best to use newspaper.

Stick it on the glass and wet it periodically. Thanks to the newspaper, the solution will not drain from the film and the effect on it will be more uniform.

After about an hour, you can begin dismantling. As in previous cases, gently pull the film down. If somewhere it holds tightly, apply the solution between the glass and the film and wait a few minutes.

With this method of removing tint, it is important not to rush.

How to remove old tint

The main difference between the old tinting and the new one is higher adhesion (adhesion) to the glass surface. If you try to remove it mechanically, most likely the picture will be as follows: the base will come off in small pieces, and the tint itself will remain on the glass.

If possible, it is better to remove the glass and place it in a hot bath, but this is a troublesome procedure and is rarely used. More often, an integrated approach is used: first, the glass is soaked in a soapy solution, after which the old tinting is removed using a hairdryer.

Removing from rear window

Since the law does not prohibit tinting the rear window, the motivation for removing the tint is likely different.

But if this is necessary, you should remember that the mechanical removal method is not suitable for the rear window, since there is a high risk of damaging the heating filaments. If you were unable to avoid damage, read the article on how to restore heating.

In addition, it is difficult to get to the rear window, and you have to work in cramped conditions. Use the thermal removal method, after soaking the film in a soapy solution.

Headlight tuning

If the headlights were tinted with film, the removal recommendations will not differ from those described above.

It is much more difficult to remove tinting from headlights made using varnish. You cannot use products containing solvents and acetone - the plastic will become cloudy, and the varnish itself will penetrate even deeper into it. If you want, you can do this on a small area of the headlight and see what happens.

More often you have to remove the varnish with fine sandpaper (2000-3000), and then polish the surface of the headlight. If you intend to carry out the removal procedure without removing the headlights, it is recommended to cover the surface around it with masking tape so as not to damage the car's paintwork.

Removing glue residue

The final step for any of the described methods is to remove the remaining glue on the glass. Use window cleaner or rubbing alcohol; if there is a lot of glue left, use a plastic scraper.

Source: http://ZnanieAvto.ru/komfort/kak-snyat-tonirovku-so-stekla.html