Making eyelashes for the headlights

How to make and how to glue eyelashes on headlights with your own hands

If you decide to transform the appearance of your car, but have no desire to spend large sums on tuning, then the best option is eyelashes for the headlights. They will help to distinguish the car from the stream of its fellows. Despite the small size, the eyelashes will give the car a new character.

Today you can easily find options for ready-made eyelashes for any car, but if you want to give the “look” of your car originality, then you should try to make a unique part yourself.

The process of creating cilia is simple, even a person without experience in tuning production can handle it, and the materials needed for the work can be found in most car stores. And what could be more pleasant than seeing beauty made by yourself on a car!

General information about eyelashes

Eyelashes are small pads that fit tightly to the headlight and cover its part (usually the top) . The main function is decorative: such elements are used to visually change the shape of the optics, but they also serve as protection against mechanical damage and environmental influences if you are not driving very carefully.

Photo gallery: images of eyelashes on headlights

Tuning on the headlights: Honda HR-VTuning on the headlights of the Mazda 3 makes the car look spectacular. Many owners of foreign cars do not disdain such elements - here are the headlights of the BMW X6. Eyelashes on the headlights: Subaru Legacy

In addition to the variety of shapes and colors, the main parameter for classifying eyelashes is the material of manufacture. The most popular eyelashes are made from self-adhesive film, PVC and fiberglass. To understand which material is better to choose, we will consider the pros, cons and difficulties of working with each of them.

Adhesive tape

Today you can find any colors and textures of self-adhesive film to make eyelashes for headlights from it.

The easiest way to make eyelashes is to use “self-adhesive”. To work with the film, no special skills or tools are required, it is cheap, you don’t have to paint it, you can choose any color, you don’t need to remove the headlights, and the entire process of making eyelashes will take you no more than 40 minutes.

It would seem that these are continuous advantages, but they are also disadvantages at the same time. The film is inexpensive, but it looks cheap on the car, does not require painting - and does not exactly match the body color, it is easy to use - and therefore anyone can do the same.

In addition, the service life of the film on the headlights is limited: the edges of the “self-adhesive” after washing lift up and tear, dirt gets clogged into scratches from stones, and after only 3 months of driving on Russian roads, such tuning will not improve, but will spoil the appearance of the car.

Keep in mind that 10 years ago, when stores were not yet overflowing with car accessories, tuning studios were developed only in the capital, and ordering tuning via the Internet was just becoming a reality, eyelashes made from film could cause admiration and a desire to “do the same.”

Today it is difficult to surprise anyone with them.

Chevrolet car tuning element - stickers made of self-adhesive paper

How to glue eyelashes from film

To make such elements yourself, you need the following kit:

sheet of self-adhesive film;
scissors or stationery knife;
degreaser;
clean cotton rag;
paper and pencil.

When making eyelashes, it is recommended to follow a certain sequence of actions.

Attach a sheet of paper to the headlight and outline the boundaries of the future eyelash. We advise you to make it not according to the size of the visible part of the headlight, but with a complete overlap with the part that is under the hood, as well as with a slight overlap with the parts adjacent to the radiator grille and fender.
Make a sketch of the future sticker on paper. Don't forget to take into account the overlap on the part of the headlight that is hidden under the hood.
Trying on the layout will save not only material, but also time for redoing an unsuccessful eyelash
Cut out the finished drawing and use the resulting stencil to transfer it to the back side of the film.
For the second headlight, flip the stencil over and draw an outline on the reverse side. To prevent the film from showing through, it is better to glue it in two layers and only then cut it out.
Clean the headlight from dirt, degrease, wait for the degreaser to dry, carefully glue the eyelashes and admire the result.

Of course, changing the appearance of a car for just 100–200 rubles (the cost of a sheet of film) is a big temptation. But if you want to get a high-quality result, we advise you to overcome this temptation. The film is suitable for beginners for their first experiments with the appearance of a car, and will also be very convenient for “trying on” the shape and color of a future eyelash on a headlight.

Carbon film coatings do not decorate the car, but give it a cheaper look

Video: gluing film eyelashes to headlights

What you can make from plastic with your own hands

Plastic eyelashes look more presentable. The cost of a sheet of plastic is low, and you can buy it at a building materials store or at a manufacturing advertising agency.

A wide selection of colors allows you to choose the material to match the color of the car and do without painting, and making eyelashes does not require any special skills from you.

You will have to spend more time and effort on such eyelashes, since it is necessary to dismantle the headlight. For special tools, you will need a hair dryer.

The easiest way to make and install eyelashes for headlights

To make eyelashes you should use:

PVC sheet 2–3 mm thick or other suitable plastic;
construction hair dryer;
Phillips screwdriver;
three types of sandpaper for plastic (coarse, for initial sanding, for final sanding);
degreaser;
clean cotton rag;
double-sided tape (or sealant);
pencil.

As a rule, the headlight is mounted with 2-3 bolts from above and has additional lower mounts. Finding the upper mounts and unscrewing the bolts is not difficult (you will see them immediately after you open the hood), but to get to the lower ones, if they are present in your car, you will have to remove the bumper.

Then you need to act according to the algorithm below.

From the PVC sheet, cut a sufficient piece to fit the eyelash with allowances for the engine compartment and side parts of the headlight, bordering the radiator grille and wing.
Apply the cut sheet to the removed headlight and, heating it with a hairdryer, smooth it until the sheet completely follows the shape of the headlight.
Do the same with the second headlight. When the plastic hardens in the desired shape, outline the boundaries of the eyelashes on it with a pencil, leaving a small allowance - about 0.3 mm - and cut out according to the drawing.
Sand the edges with sandpaper, starting with the coarsest sandpaper to refine and level the edges, and moving on to fine sandpaper to get rid of possible nicks, scratches and make the edges perfectly smooth.
Let's move on to installation: clean and degrease the headlight, do the same with the inside of the eyelash.
After the degreaser has completely dried, we glue double-sided tape to the headlight, carefully attach the cover and enjoy the updated look of the optics.

Photo gallery: a simple way to stick eyelashes

Making cilia from plastic requires dismantling the headlight. A sheet of plastic, which is necessary for making cilia. We heat the plastic with a hairdryer and give it the shape of a headlight. Cut out the blank for subsequent processing.

Before using a hairdryer, examine the material of your headlight. Nowadays, cheap optics from Chinese manufacturers have become widespread, which are often made not of glass, but of plastic. If one is installed on a car and you heat it with a hairdryer, the headlight can be thrown away.

I would like to add a few words about painting plastic eyelashes: it is believed that painting is not necessary, since you can match the plastic to the color of the car, and, if desired, change its color with self-adhesive film. But it is almost impossible to achieve an exact color match, and since the plastic is more matte than the paintwork of the car, the plastic eyelash may look foreign.

If the plastic wears out over time, it will look unattractive. Therefore, we recommend spending a little more time and painting the plastic eyelashes before installation.

How to dye eyelashes

To paint plastic eyelashes you should use:

sandpaper;
degreaser;
clean cotton rag;
cans of varnish, acrylic primer and paint.

Varnish, primer, and paint can be found in specialized stores that sell automotive paint. When purchasing, pay attention to the use of plastic materials. When choosing paint, if you want to match the color exactly, use your car's paint code, which is located on the metal plate under the hood (when the car has not been repainted).

Before starting work, collect everything you need: primer, paint, spatulas, sandpaper, sanding discs, spray gun, varnish, film

Check how the purchased cans work on any unnecessary surface. They can spray at different intensities. To achieve the desired effect, you should practice a little, choosing the optimal distance at which you need to hold the can and the speed at which you apply the paint. Choose a place for fishing where there is no dust.

Now you should proceed in the sequence below.

Remove dust and degrease the eyelash, place it on paper or film in a place convenient for painting, wait until the degreaser has completely dried and begin applying primer.
Cover the tuning elements with primer. In order for the coating to be smooth and without drips, you must follow two basic rules: keep the can at a fixed distance from the product (to do this, you need to move not your whole hand, but only your hand, turning the can) and apply the material with an overlap.
After drying, smooth out any unevenness and sand the surface with fine sandpaper. You need to sand the surface not by hand, but by placing sandpaper on a sponge to avoid the appearance of unevenness from pressing with your fingers.
Degrease the sanded eyelash again and apply the first layer of paint using the same method, after complete drying - the second layer, and then, after the paint has completely dried, varnish.
Wait until the part is completely dry and begin installing the eyelashes. The result will please you - the parts will look like factory ones.

Video: features of painting plastic

To achieve the best results in applying primer, paint and varnish, it is worth using a pneumatic spray gun: with the correct adjustment of the input air pressure and the intensity of the material supply, you can paint the part perfectly.

But to paint with a spray gun, you will need a compressor and training in setting up and operating the spray gun, and you will also have to learn how to mix paint correctly.

This is a labor-intensive process that cannot be mastered in half an hour, and if painting eyelashes is a one-time event and not a constant hobby, feel free to paint them with a spray can.

Fiberglass

For several reasons, this is the most difficult execution option: there is no ready-made material (the trim will have to be sculpted from scratch), the headlight must be dismantled, and painting is required. But the result is worth the effort: if you set out to make eyelashes from fiberglass, you will end up with a high-quality, durable product.

Easy way to make, paint and install

To make fiberglass eyelashes we need the following set of tools:

crosshead screwdriver;
masking tape;
pencil;
brush;
epoxy resin;
several sheets of fiberglass;
primer;
clean cotton rag;
degreaser;
putty;
three narrow spatulas (3, 5 and 8 cm);
grinding machine (grinder with grinding wheels or long and hard manual labor);
acrylic paint;
sandpaper;
varnish

We dismantle the headlight and begin the process of installing the eyelashes.

We cover the headlight with masking tape (to avoid accidental contact with resin, it is better to cover it completely, and not just the part on which the eyelash will be placed).
We decide on the shape, make a stencil and cut out fiberglass fabric on it (from 2 to 5 layers for each eyelash; the quantity will depend on the quality of the fiberglass fabric and the volume of epoxy resin), with allowances for polishing the edges.
We begin to create a blank: using a brush, place a thin layer of epoxy resin on the headlight, carefully apply a pre-cut sheet of fiberglass, press, smooth and leave to dry. This is a slow process, the layer can dry from 1 to 5 hours, depending on the temperature and humidity in the room.
After complete drying, apply subsequent layers in the same way.
Then we remove the workpiece, correct the shape with coarse sandpaper and carefully sand the edges, removing the most obvious roughness on the eyelash.

And then we work according to the standard scheme, which was described above. We degrease, apply putty, wait until it dries, and sand. Degrease, prime, sand. We degrease, paint and varnish, wait until it dries.

Photo gallery: proven method of making eyelashes

Getting ready - we cover the headlights with masking tape. We draw a blank of eyelashes for the headlights. We take fiberglass, cut it into the necessary pieces. On the headlight, protected with masking tape, we apply a layer of epoxy resin and lay down the fiberglass, then dry it. On the dried layer, we apply a new layer of resin and fiberglass according to the same scheme. The eyelashes dry, and the owner of the car impatiently waiting for the result of his work. We remove the fiberglass eyelashes for final processing. We trim the eyelashes and look at the result. This is what the eyelashes look like after puttying and sanding. This is how cool the eyelashes turned out after priming and painting

We install it on the headlight using double-sided tape or sealant. Let's enjoy the victory! A lot of time and effort was spent, but such eyelashes look great and will delight the eye for many years.

Video: making your own eyelashes

LEDs as the basis for fashionable headlights

There are eyelashes that are mounted in the headlight housing, namely, from LED strip. However, on July 21, 2016, a new law was introduced to tighten measures for installing tuning. Ordinary eyelashes are not prohibited if their presence does not interfere with the supply of light.

LED tuning elements look stylish: it’s a pity that they are prohibited

But the installation of LED eyelashes is a change in the design of lighting fixtures not provided for by the manufacturer (except for those cases where LED eyelashes were installed on exactly the same model, but in a different configuration). For this, according to current legislation, you may face a completely legal deprivation of your driver's license for a period of 6 to 12 months. Is the game worth the candle? You decide.

Tuning does not have to be expensive and labor-intensive. Even without special training, you can create an original part with your own hands in a few hours, which will attract the attention of other car enthusiasts.

Tuning your favorite car yourself is always a pleasant and interesting experience that you will remember every day when you look at the transformed car.

Stock up on everything you need and try making eyelashes - you won’t regret it!

Source: https://carnovato.ru/resnichki-na-faryi-svoimi-rukami/

Eyelashes on car headlights

The topic of external tuning has become increasingly popular in recent years. Car enthusiasts set a goal to change their car, make it stand out from the traffic flow, and give it an individual appearance. All this is easy to implement - just show a little imagination and take the time to transform your car.

There is an opinion that tuning is always expensive and difficult. Indeed, some work (repainting the body, applying airbrushing, installing spoilers and other activities) is not cheap. But you can start with something simple - make eyelashes for the headlights with your own hands. Such tuning takes a minimum of time, and costs amount to several hundred rubles.

But more about everything.

What are eyelashes on headlights?

The essence of tuning is the application of small overlays of different shapes, thicknesses and volumes to the surface of the headlight.
Despite their compactness, eyelashes on the headlights transform the car, making it unique and different from others. As for the material, there are a lot of options - you can use film, carbon, metal, plastic, fiberglass and so on. The advantage of this tuning:

Simplicity.
It takes no more than a day to complete the work. In this case, the duration of work depends on the total complexity of tuning and the materials used; minimum costs. For such work you do not need to involve specialists or go to a service station. Making eyelashes for headlights with your own hands is a matter of several hundred rubles. As a rule, a standard set of materials is required - sandpaper, film, putty, and so on;
Original appearance. If everything is done correctly, the car becomes more attractive and is memorable for its appearance;
Wide possibilities. Today there are many options for making eyelashes on headlights. We will present the best of them in this article;
Reliability. When using high-quality materials, the new tuning will last a very long time and will please the eyes of the owner and people around him.

Let's look at proven methods for making eyelashes and the features of their implementation:

Fiberglass eyelashes

1. Fiberglass eyelashes are one of the most popular options.

The algorithm of actions is as follows:

prepare the necessary material to complete the work. You will need gloves, putty, a piece of fiberglass, a special roller, epoxy resin, a small grinder with a sanding wheel, fine-grit sandpaper and masking tape;
Be sure to take the necessary measurements that will allow you to accurately prepare a template for the headlights of your car. To make it more convenient to work, it is better to remove the headlight from its place and take measurements somewhere on the workbench with good lighting;
Before starting work, thoroughly wash the headlight - there should be no dirt or dust on it. Otherwise, your efforts will be in vain - the newly glued eyelashes will quickly fall off; cover the headlight with masking tape so as not to spoil the surface of expensive optics;
cut fiberglass or fiberglass into small pieces (this will make it easier to work with);
Apply epoxy resin to the surface of the headlight and lay the fiberglass prepared in pieces on top. After this, immediately coat the surface with another layer of epoxy resin. Wear a respirator, because fumes from epoxy are very toxic and can harm the body;
make several such layers of fiberglass (two or three are enough). After applying each, allow about 40-50 minutes to dry (in warm weather). Thus, we get two blanks for the left and right headlights. The next goal is to cut out the eyelashes we need from them;
Using masking tape, attach the blanks to the headlights and decide on the shape you are interested in. Take the necessary measurements and cut off any excess using scissors.

Work very carefully so as not to spoil the workpiece. The result should be two eyelashes. But don't rush to attach them.

The workpiece is removed

The next task is processing.

remove the finished structure and sand it. This can be done using a regular grinder or sandpaper;
As soon as the workpiece is cleaned on all sides, you can move on to the next stage - priming, and after that puttying. The main task here is to perfectly align the product for further paint application. After the surface becomes perfectly smooth to the touch and without a hint of roughness, the cleaning stage is completed;
Apply paint using a sprayer at a distance of 25-30 centimeters from the product. To achieve maximum quality work, make several layers (at least 3-4). After each new layer, let it dry for several hours;
after the last drying, open the finished eyelashes on the headlights with varnish;
Now, using double-sided tape or sealant, attach the finished products to the headlights of your car. For greater reliability, provide a margin on the top of the eyelashes, place them under the hood and secure them with mounting bolts.

Final result

2. Plastic eyelashes are one of the most budget options

Most car enthusiasts choose this method due to the low costs of materials and the minimal complexity of the work. It is unlikely that you will be able to buy ready-made plastic blanks, so they will have to be cut from a sheet of plastic (it is much easier to find).

Large size PVC sheets can be found in automotive stores or markets, advertising agencies or art stores. It does not matter what format the product will have. The main thing is that its thickness is about 2-3 millimeters.

The advantage of thin plastic is ease of processing.

Video: How to make eyelashes for headlights yourself. Headlight styling

As soon as the material is purchased, decide on the future shape of the eyelashes. Make a sample and cut out the finished part for tuning. Proceed carefully so that no unnecessary burrs remain on the part. Upon completion of the work, the surface of the product must be carefully sanded and sanded.

The big advantage of this method is the ability to choose the shape of your own and change the color without using paint or a spray gun. All that is required is to apply the self-adhesive film of the desired color.

Please note that before attaching the eyelashes, it is important to thoroughly clean, degrease and dry the surface of the headlight.

To make the overlays look natural, take the time to choose the right type of plastic. Ideally, it should bend well and be of small thickness. The more natural the eyelashes look on the car, the better. If desired, the shape of the eyelashes can be changed - just bend them slightly upward. For these purposes, you can use a hairdryer (construction or regular).

Film eyelashes

Source: http://AvtoMotoProf.ru/avtoakssesuaryi/resnichki-na-faryi-avtomobilya/

DIY eyelashes for headlights or how to quickly decorate your headlights?

To give their car individuality and make it stand out from the crowd, car enthusiasts resort to various tricks, looking for new tuning elements.

It's no secret that for many, a car is a pet, a favorite, practically a member of the family.

No matter how strange it may sound to those who are indifferent to cars, there are “boys” and “girls” among cars. Cars have their own character, and if the friendship between the owner and the iron horse has worked out, the car owner tries to please his car.

In this article we will talk about jewelry for “girls,” which is popularly affectionately called “eyelashes.”.

Ready-made eyelashes in the store are not that cheap, so let’s try to figure out how to make eyelashes for headlights with our own hands. Materials that are suitable for this purpose are available freely on the market or in construction stores . All you have to do is have patience, ingenuity, creativity and a little desire.

Plastic eyelashes

Headlight covers made of plastic are the simplest and most affordable option. They will not require expensive components and will not take a lot of time and effort. It is unlikely that you will be able to buy special plastic blanks, but a small sheet of plastic will be easier to find.

First of all, you should look in auto stores and car markets. If you can’t find it, contact art stores and advertising agencies. There, PVC sheets are often used for painting and printing. In principle, any polymer with a thickness of 2-3 mm can be used.

Thin plastic is easy to process.

In order to make eyelashes, you need to decide on the shape of the tuning elements, draw them on the plastic and cut them out. Try to cut evenly so as not to leave burrs on the workpiece. The edges of the workpiece need to be sanded and sanded . If desired, you can change the color of the eyelashes using self-adhesive film.

Before attaching the finished eyelashes to the car, the headlights must be degreased and dried.

In order to make “natural” eyelashes, and not just extensions, you need a different plastic. It should be thin and bend freely so that the headlight covers look natural. If you want to change the shape of the workpiece, curl the eyelashes upward coquettishly, then use a hairdryer; the heated plastic will easily change the shape according to your desire.

Film eyelashes

Eyelashes for headlights made of film are the simplest and least expensive option, but they have the appropriate quality and service life.

For this work you will need black glossy film, electrical tape and tape, tracing paper, pencil and scissors. The pattern is made from black electrical tape and tracing paper, then the outline of the future eyelash is transferred to self-adhesive and cut out.

Previously, we talked about how to make vinyl stickers for a car from the same film.

In order for the eyelashes to be denser, they can be made in two layers. They will flutter in the wind, so carefully calculate their length so that their beauty does not interfere with proper lighting.

LED eyelashes for headlights

Eyelashes for VAZ 2114 headlights will help you change the appearance of your car if you add an element of LED lighting to them.

To do this, you need to remove the glass from the headlight (this is quite easy to do even with a regular knife).
You need to connect the LED eyelashes to the dimensions.

We strip the conductors from the LED strip (it is better that the wires are thin) and connect them to the connector from the dimensions.

The part of the glass near which the LED strip will be located must be made matte. The easiest way to clean it is with a sander. Just don’t get carried away with this process, so as not to disturb the quality of headlight illumination, because this is their main purpose, and decoration is a secondary issue.

Connect the light

DIY fiberglass eyelashes

If you decide to make eyelashes for the headlights (photos of which are presented below) from fiberglass, then keep in mind that this option is the most labor-intensive, but the result is worth it. To make your own eyelashes, you will need:

dense fiberglass;
polyester resin;
masking tape;
sandpaper;
brush.

We take measurements from the removed headlight and determine the size of the template.

In order not to spoil the external one as a result of preliminary manipulations, we cover the headlight glass with masking tape.

We draw a sketch of the eyelash, just in case, give some margin for further freedom of action, and transfer the sketch to the fiberglass.

We impregnate the finished fiberglass blank with resin, apply it to the headlight, then apply another 4-5 similar layers on top of the first layer in the same way.

After drying, the workpiece is easily separated from the headlight , it is ready for further processing - puttying.

A layer of putty is applied to hide the structure of the fiberglass. After the putty layer has dried, you can paint the eyelashes in the desired color. In order to add gloss, we coat the eyelashes with varnish.

If you make eyelashes for headlights with your own hands from film, then be prepared for the fact that they will quickly become unusable and will have to be renewed, while fiberglass eyelashes will serve you for quite a long time.

Don't know which eyelashes to choose? Watch a video about the pros and cons of different types of eyelashes:

How to attach eyelashes to headlights?

The easiest way to secure the finished structure is with double-sided tape. The headlight glass must first be cleaned, degreased and dried.

Also treat the inner surface of the eyelashes - this is conveniently done using alcohol wipes. The tape should extend a couple of centimeters beyond the edge of the eyelashes - this will make the installation process easier.

To harden the adhesive layer, we recommend leaving the car in a warm box for a day.

You can also use transparent silicone glue or sealant as an adhesive material. In this case, be sure to cover the free surface of the headlight with masking tape so as not to damage the glass .

If you are still in doubt whether your car needs eyelashes on the headlights, the photos that we invite you to look at will certainly help you make the right decision.

Photo gallery “Do-it-yourself eyelashes for cars”

Source: https://za-rulem.org/tuning/optica/resnichki-na-fary-svoimi-rukami.html

How to make eyelashes for your car's headlights

Today, new materials have appeared on sale that allow almost any car owner to tune their car with their own hands.

And if previously such a tuning accessory as eyelashes for headlights had to be purchased, now you can easily and simply make them yourself. Choosing the shape and color you like.

And most importantly, your eyelashes will be completely original and unique.

Eyelashes on BMW

There are both simple and cheap options on sale, as well as more expensive ones with complex configurations. For example, with the widespread use of LED headlights, some tuning studios have also developed special lashes with LED backlighting.

What are eyelashes for headlights and why are they needed?

For those who do not know what eyelashes for headlights are and their purpose, we will explain, eyelashes for headlights are small narrow linings that give the headlights, and the car as a whole, a different appearance.

Moreover, such overlays must be of the correct size so that the operation of the optics is not disrupted. Such accessories allow you to transform semicircular optics into rectangular ones and vice versa.

Also, such overlays additionally enhance the optics and protect the glass from impacts from small stones and gravel.

For those who consider this type of appearance tuning to be insignificant and ineffective, we advise you to park your car next to a car whose optics have been tuned using cilia. And you will feel the difference.

Therefore, even such a minor tuning accessory will help you change the look of your car. Make it unique. Sometimes truly unique examples of auto tuning are born from simple little things.

Original tuning of “eyelashes” on headlights

We make eyelashes for headlights

Despite its apparent simplicity, the procedure for such tuning is quite difficult, and requires not only perseverance and patience. But also basic skills in working with household tools.

Fiberglass is mainly used to make eyelashes. And additional materials for working with it. Although other modern materials can be used.

Ready-made “eyelashes” for Nissan

We will consider the option of how to make eyelashes for headlights with your own hands, from fiberglass. In addition to the fiber itself, we need epoxy resin, masking tape, and putty.

Preparing optics and car for tuning

The procedure for making the overlays itself is performed directly on the headlight glass. Therefore, the headlights must first be removed. After this, we clean the surface of the glass from dirt and carefully seal it with masking tape.

After pasting, be sure to make sure that there are no uncovered areas of the headlight between the strips of tape. This is necessary so that the resin used to process the fiberglass does not stick to the surface of the headlight.

After all, it will be almost impossible to remove it from the glass.

Making a blank

After the surface of the headlight is prepared, you can begin to form the blank of the future eyelash. To do this, we first apply a layer of resin, and then lay the cut fiberglass on it.

In order for the lining to be durable, the fiberglass fabric must be laid in several layers. But remember that you cannot put layer after layer at once. It is necessary for each layer to dry a little.

On average, a thin layer of resin and fiberglass dries in 3-6 hours.

There is no need to make the eyelashes too thick; they will not look good on the headlights. After applying all the layers and drying the workpiece, remove it from the surface of the headlight. Using a similar method, we make a blank for the second headlight.

After the blanks are ready, it’s time to start designing and decorating the eyelashes. What form to make them is a purely personal decision. If you have no thoughts about this, well, just visit several Internet sites dedicated to car tuning and see what kind of headlight covers they have.

Design of headlight covers

After this, do not rush to cut the workpiece so as not to spoil it. It’s not a fact that the eyelash of your design will look on the headlights of your car.

In order to check this, it is best to cut out a template of eyelashes for the headlights from adhesive tape with your own hands, then glue it to the glass of the lamp.

If you like this sample, only then should you start working on the fiberglass blank.

To give the workpieces the correct shape, it is necessary to apply a line using a stencil with a marker. Then we cut our workpiece to the desired shape. In this case, it is desirable that the cuts are smooth and without strong burrs.

After which we carefully putty the surface of the future eyelash for headlights. After the putty has dried, carefully sand the entire product with fine sandpaper. In this case, the main thing is that the sandpaper is not in your hands, but wound on a small wooden block with a flat surface.

Because if you press the sandpaper with your hands, you will get an uneven work surface with pits and depressions. Rubbing should be done in a circular motion. And if small cavities and depressions nevertheless appear, you must again apply a layer of putty and wait for it to harden.

Then repeat the grinding procedure. Next we need to prime and paint the overlay in the color we need. Before you start coloring, make sure that the surface of the eyelashes is smooth and free of irregularities. You can paint it either in the color of the car body or in another color.

The main thing is that it goes well with the main color of the car. It is through coloring that the light optics can be given an aggressive or sporty look.

Making “eyelashes” for headlights using the example of Lada Priora:

These covers are attached to the headlights using double-sided tape. Considering that the weight of the product, a small piece of tape will do the job perfectly.

If the configuration of the headlight does not allow you to secure the eyelashes with tape, then when creating the workpiece, you need to consider an option with fastenings in the form of small eyes. Into which you can then screw self-tapping screws.

Also, do not forget about the various cutouts and grooves that are available in the headlights. It is advisable that the trim goes under the hood, this will give it more beauty.

If everything is done correctly, in the end you will get a wonderful and, most importantly, unique part for tuning the appearance of your car. Which will not only change the front part of the car, but will also allow you to prove to others that tuning is simple and completely within the capabilities of any interested car enthusiast.

Source: http://AvtoMotoSpec.ru/tyunning-avtomobilej/izgotovlenie-resnichek-dlya-far-svoimi-rukami.html

Bad look eyelashes (do-it-yourself made from fiberglass) - logbook Hyundai Coupe Astina 2006 on DRIVE2

The idea of making eyelashes in the bad look style has been around since last summer, then I got confused but made them from film, it looked relatively collective farm and if you do it, you need to do it properly. You can’t buy them anywhere yet, so I decided to make my own eyelashes from fiberglass. I read how people work with fiberglass, bought everything I needed and started sculpting.

First of all, we buy a list of what we need.

1 The fiberglass itself. I bought two packages at the Kuntsevo market for 250 rubles each. (there is a company where you can buy a whole roll of rubles for 800, but I found out about it too late, so I can give the address to anyone)

2 epoxy resin with a hardener, you can buy at any construction market, 2 packages will be enough. price around 100-200 rubles

3 masking tape 4 cling film 5 brush

6 rubber gloves (or you can steal gloves from the gas station 😉 because epoxy is harmful to the skin.

This list is enough to make eyelashes. The rest will be needed when the eyelash shape is ready. (tin scissors, sandpaper, etc.)

Cut the fiberglass into pieces, measuring the size according to the headlight. I decided to put 4 layers on each eyelash, i.e. cut out 8 pieces. Then, in order not to damage the bumper and headlights, we begin to seal them.

I glued a little masking tape and newspaper to the bumper (so that the resin wouldn’t get in) and the entire headlights were covered with masking tape in an even layer!
To be completely sure of its reliability, I put cling film on top of the tape (people don’t always bother like that and put one or the other, but I did it for the first time and therefore completely protected the headlights).

Next, open the epoxy resin and hardener, mix them in a ratio of 1 to 10, but in any case it will be written on the packaging in what proportions to mix.

And so the crucial moment) we take the first piece of fiberglass, apply it to the headlight and spread the resin over this piece with a brush. So, one after another, we apply three more layers on top, thoroughly coating them with resin after each one.

Same procedure with the second headlight. You need to make sure that the fiberglass fits tightly to the headlight. After both headlights are coated, check that the fiberglass fits tightly and leave the whole thing to harden.

I did all this in the winter in the garage, it was not very hot, I had to help with a hairdryer so that the resin and epoxy would harden quickly.

After 5 hours the “eyelashes” froze a little, I removed the blanks from the headlight and left them in the garage for a day. Naturally, it is not necessary to remove them from the car.

To make life easier, when the workpiece hardens, you can mark the boundaries of the eyelash on it with a felt-tip pen, in short, outline the shape so that it will be easier to carve out later.

Next, I took metal scissors, cut off the excess, and gave it an approximate shape.

All that remains is to align the eyelashes along the contour and along the entire plane so that you can then evenly apply the primer and paint.

In general, that’s all, I sanded everything for a long time and painfully to get a smooth surface, gave it to a painter, where the eyelashes were primed and painted.
Then I bought 3m double-sided tape, glued it completely inside the eyelashes and carefully stuck them on the headlights!

BAD LOOOOOOOK!) Looks sooo cool, in the evening it's a fire.

I will be glad if my story helps someone, I tried)) PriuEt to everyone

Source: https://www.drive2.com/l/4899916394579369684/

How to make and how to glue eyelashes on headlights with your own hands

Probably every driver has seen cars driving around the city with cute eyelashes on their headlights. Today, eyelashes for headlights are sold in car dealerships, but you can make them yourself.

Why are eyelashes installed on car headlights?

Eyelashes on headlights are narrow linings that are small in size. The cilia help make changes to the shape of the front lighting fixtures. So, rectangular headlights can become semicircular, and vice versa. In addition, the presence of cilia helps protect the surface of the headlight glass from mechanical damage caused by small stones.

Eyelashes on the headlights will give your car a unique elegance

If, in your opinion, installing eyelashes will not distinguish your car from a number of other cars, conduct a simple experiment. Park your car in the parking lot next to the same one, but with eyelashes.

The difference will simply catch your eye. It would seem that the eyelashes are such a small thing, but the appearance of the car changes dramatically.

And if the eyelashes are installed professionally, this detail will become an important point of the entire exterior.

Kinds

Manufacturers of automobile accessories offer three types of eyelashes for headlights, the differences of which lie in their purpose and characteristics.

Protective. Their main task, as the name suggests, is protection from mechanical damage. To make protective eyelashes, transparent thermoplastic is used, onto which the eyelash pattern fits perfectly.
Chrome plated. They are designed to create a harmonious design of the car's exterior. If the car already has chrome parts, then such eyelashes will serve as a good addition to them.
Plastic - without exaggeration, they can be called the most common linings. As a rule, they are universal and affordable.

However, often the car owner does not like industrially manufactured linings either because of their appearance or because of poor quality. That’s why many people prefer to make eyelashes with their own hands. It costs no more than buying factory products.

Types presented on the Russian market: video

https://youtube.com/watch?v=ThQgiDYAQi0

Craftsmen use several methods to make eyelashes. Each of them has its own advantages and disadvantages. Therefore, each owner chooses the option that best suits his requirements and needs.

Using vinyl and tinted film for manufacturing

This method is the simplest and fastest, and when used, it takes 5-10 minutes to make products. True, they will look worse than those that require a lot of time and a large amount of materials to produce.

Making eyelashes from film is quick and easy

If you narrow the headlights using a black film, then such eyelashes will look harmonious on cars of the same color, but not very well on cars of a different color. But this problem can be easily solved, since finding a film that harmoniously matches the color of the car today is not at all difficult.

Having opted for vinyl film used for car wrapping, the driver can give free rein to his imagination. After all, its color range, sold through car dealerships, is very wide. And eyelashes cut from carbon-fiber vinyl will look very original.

How to make eyelashes for headlights from film: video

Among other things, headlight light does not pass through the vinyl film, while the tint film does. And in this case, the material for making eyelashes can be picked up near workshops that specialize in wrapping cars with vinyl - they always have a lot of waste.

Before you start making eyelashes, you need to make a cast of them. For this purpose, the upper part of the surface of the headlights should be covered with masking tape. This must be done so that it does not reach the central part a little.

After this, using a pencil or marker, a drawing of future eyelashes is applied to the tape. It should be taken into account that too wide eyelashes can significantly reduce the luminous flux of headlights. And they won’t look very stylish.

Next, the tape is cut along the drawn lines. After this, you need to move some distance away from the car and look at what the eyelashes look like from different angles. If necessary, necessary adjustments should be made.

If everything is satisfactory, then the tape is carefully removed and the non-adhesive side is applied to the tape glued to the second headlight. The outlines of the template are copied onto it and the second set of cilia is cut out. The tape removed from both headlights is pasted onto the film. To do this, select the side on which there is no transparent protection. Now you can cut eyelashes from the film with scissors.

The resulting products are applied with the adhesive side to the surface of the headlights, which is previously degreased with a solvent. If the shape of the headlights is too convex, then the film must be molded during the sticker process. A hair dryer is used for this purpose.

Sheet plastic as a material for DIY manufacturing

Currently, a lot of plastic has appeared on sale, sold in sheets of different thicknesses. And it is this that can be used to make eyelashes for headlights. Just don’t buy heat-resistant plastic for this purpose, since it cannot be given the required shape by heating.

Plastic option for Audi 80: video

You can use sheet plastic with a thickness of no more than one and a half millimeters. It is attached to the headlight using double-sided tape, without heating. But, as experience shows, it is better to use plastic with a thickness of about 2.5 mm. It will not only be more reliable, but also more beautiful.

The preliminary work for making the template is the same as in the previous case. The only difference is that to cut out the eyelashes you will have to use an electric jigsaw rather than scissors. The cut blanks must be applied to the headlights to determine the need for changes.

Next, the edges are processed to a rounded state. For this purpose, you can use either a fine file or a grinder.

The flat surface is treated with waterproof sandpaper No. 600. This is done so that the adhesion coefficient of the surface increases during subsequent treatment with a primer.

The latter is an acrylic two-component primer.

But before priming and painting the plastic eyelashes, they should be formatted according to the shape of the headlights. A hair dryer is used for this. The surface of the plastic is heated to a plastic state, after which it is given the desired shape. This will increase the reliability of attaching the plastic eyelashes to the surface of the headlights using double-sided tape.

If you don’t have a hair dryer at hand, you can get by with a regular kettle. At the same time, it is even more convenient to work with it than with a hairdryer, since in this case both hands are free. The water in the kettle is brought to a boil, and a plastic part is brought to its spout, the surface of which is heated by the steam.

With little effort, the heated part can be given the required shape, after which the exposure to steam stops. In this case, it is necessary to keep the part in the given position until the plastic cools completely. It is recommended to bend the cilia in stages to achieve their ideal fit to the surface of the headlights. The finished product is secured using double-sided tape.

Eyelashes for headlights made of epoxy resin and fiberglass

This option for making eyelashes is the most labor-intensive, but the quality of the product when used is at a very high level. At the same time, all the bends and design features are repeated down to the smallest detail.

It is with the help of this method that eyelashes are obtained well for foreign-made cars, the headlights of which are heavily slicked, and their surface is curved in both planes.

And covers for headlights with a corrugated surface can generally be made only in this way.

To make eyelashes, you will need the following tools and materials:

fiberglass;
epoxy resin, and if you don’t have it, you can use epoxy glue;
household tape and masking tape;
a brush with short and hard bristles;
roller of small width;
rubber gloves to protect the surface of the hands;
respirator to protect the respiratory tract of a worker.

It is better to remove the headlights from the car before starting work. Firstly, it will be more convenient to work with them, and secondly, it eliminates the possibility of staining the surface of the hood or bumper with resin.

The surface of the headlight is covered with masking tape, onto the surface of which the contours of the eyelashes are applied.

The removed headlights are placed on a surface covered with oilcloth. The surface of the headlight is covered with household tape. Painting tape is glued over it. The latter should be applied in such a way that the joints of household tape are glued - this is done to eliminate the possibility of particles of epoxy resin or glue penetrating the headlight.

The contours of the eyelashes are drawn on the surface of the masking tape using a marker. This is necessary in order to determine the limit of gluing thin or thick fiberglass.

However, we must remember that thin fiberglass allows layers to be applied more accurately, especially in places where the glass is sharply curved. Making blanks using thin fiberglass will require more time.

Sequence of work:

Fiberglass is cut into narrow strips. Their length should be slightly greater than the width of the headlight.
Epoxy glue is diluted at the rate of 1 part hardener to 10 parts glue. Violation of the proportions can lead to the glue hardening too early or taking a very long time to harden. In this case, the strength characteristics will be violated.
Next, put on rubber gloves and apply a thin layer of resin to the tape. In this case, the contour of the drawn overlays should overlap by approximately one centimeter.
We lay thin fiberglass fabric on the resulting layer of resin. Its surface is rolled with a small roller until the epoxy resin shows through.
Resin and fiberglass must be applied in several layers
Another layer of epoxy glue is applied to the fiberglass with a brush, on top of which the fiberglass is again placed. In this case, the edge of the new layer should overlap the boundaries of the first by five millimeters. And again the surface must be rolled until the resin passes through the pores of the fabric. As a result of the roller treatment, all air bubbles should be completely removed from the space between the layers.
The last layer of fiberglass is generously filled with epoxy resin. The total thickness of all layers must be at least 4 mm. The finished product is left for about a day to allow the epoxy resin to dry completely. The headlight should be positioned in such a way that the surface of future eyelashes is strictly horizontal. This will avoid smudges and unevenness.
After the resin has completely dried, the covers are removed from the headlights. As a rule, this is not difficult to do - the surface of household tape is very slippery and masking tape comes off easily.
Now you need to remove all the tape from the surface of the headlights and wash them with some solvent or gasoline.
A pattern is applied to the eyelash blank with a marker, according to which it is cut using an electric jigsaw or grinder.
The cut trims are tried on the headlights. If everything is normal, then the surface of the eyelashes is treated with sandpaper. First, rough sanding is used, and then finishing is done using fine sandpaper.
The surface, treated to a perfectly smooth state, is primed and painted to match the color of the car body. In this case, as a rule, after applying the first layer of paint, small defects are revealed. They can be removed using finishing putty. The surface is again sanded, primed and painted. At least 3 layers of paint must be applied.
Well-dried eyelashes are attached to the headlights using double-sided tape.

Video instructions for installing eyelashes on car headlights

Making and installing eyelashes on car headlights with your own hands or using the help of specialists is a personal matter for each driver. But no matter which option for installing the eyelashes is chosen, we can say with confidence that this exterior detail will provide the car with beauty and originality.

Source: http://autoclub.su/resnichki-na-faryi-svoimi-rukami/